What is the method for DIY oil change?

1 Answers
StRebecca
07/25/25 12:38pm
DIY oil change method: 1. Open the hood and remove the oil filler cap; 2. Locate the air filter, remove it, clean it using compressed air from an air pump, then reinstall; 3. Lift the vehicle, unscrew the drain plug, and drain the oil; 4. After the oil is completely drained, remove the oil filter; 5. When installing the new oil filter, apply a thin layer of oil around the sealing ring to prevent damage from compression, making future removal easier. Install the oil filter and tighten the oil pan drain plug, then wipe off any excess oil with a cloth; 6. Do not overfill with oil—ensure the level is between the minimum and maximum marks on the dipstick. After adding oil, start the engine and let it run for three minutes, then turn it off and wait one minute. Check the oil level again using the dipstick to confirm it reaches the correct mark, completing the process.
Was this review help?
5
1
Share
More Forum Discussions

How to Set Up Auto-Locking for Hyundai Elantra?

Method for setting up auto-locking in Hyundai Elantra: With the car powered on, hold the lock button for 10 seconds, then turn off the ignition. Restart the car to complete the setup. The auto-locking feature is designed for anti-theft purposes and will only activate after reaching a certain speed while driving. This helps prevent door-pulling robberies during traffic jams or at red lights, providing an added layer of security. The Hyundai Elantra has body dimensions of 4620mm in length, 1800mm in width, and 1435mm in height, with a wheelbase of 2700mm. The car is equipped with two engine options: a 1.6L and a 1.4T. The 1.6L engine delivers a maximum power of 95.3kW and a maximum torque of 157Nm, while the 1.4T engine offers a maximum power of 95.6kW and a maximum torque of 210.8Nm. These engines are paired with a 6-speed automatic transmission and a 7-speed dual-clutch transmission, respectively.
20
3
Share

How to Turn On the Electronic Stability Program (ESP)?

The method to activate the Electronic Stability Program (ESP) is: Locate the physical ESP button on the vehicle and press it until the indicator light illuminates. Typically, the ESP system is enabled by default in most vehicles and does not require manual activation. The Electronic Stability Program is an advanced extension of the Anti-lock Braking System (ABS) and Traction Control System (TCS) functionalities. During driving, the steering angle sensor detects the driver's intended turning direction and angle, while the wheel speed sensor monitors vehicle speed, throttle position, and torque. The brake sensor measures braking force, and the yaw rate sensor tracks the vehicle's tilt angle and roll rate. The ECU processes this data to calculate any discrepancy between safe driving parameters and the driver's input. Based on this analysis, it adjusts engine output and individual wheel braking force to correct oversteer or understeer situations, thereby preventing skidding, excessive steering, insufficient steering, or wheel lock-up to ensure driving safety.
13
5
Share

What to Do When the Tire Pressure Monitoring System Warning Light Comes On?

Solutions for when the tire pressure monitoring system warning light comes on: 1. The driver should stop and check if there is any issue with the tires; 2. Check the tire pressure to determine if it is a false alarm. If it is a false alarm, locate the SET button to reset the tire pressure and manually turn off the tire pressure monitoring light; 3. Use a tire pressure gauge to check the tire pressure. If the tire pressure is abnormal, restore the tire pressure to the standard level; 4. Check if there is any issue with the car's sensors; 5. Visit a nearby auto repair shop or 4S store for inspection and repair. The tire pressure monitoring system warning light coming on indicates that the current tire pressure deviation among the four tires is too large or the tires are underinflated, meaning there is an issue with the vehicle's tire pressure that needs to be checked and resolved as soon as possible.
1
2
Share

What is the engine model of the Bestune T77?

The engine model of the Bestune T77 is CA4GA12TD, which is a 1.2T direct-injection turbocharged engine. This engine features high power and fuel efficiency, with a maximum power output of 100kW and a maximum torque of 204Nm. It is equipped with direct fuel injection technology and utilizes an aluminum alloy cylinder head with an iron cylinder block. There are two transmission options paired with this engine: a 6-speed manual transmission and a 7-speed dual-clutch transmission. The Bestune T77 adopts a MacPherson independent suspension for the front and a torsion beam non-independent suspension for the rear. The vehicle comes with an electric power steering system and is designed as a front-wheel-drive urban SUV.
13
4
Share

How to Reset the Tire Pressure Warning Light on a BMW 3 Series?

The method to reset the tire pressure warning light on a BMW 3 Series is as follows: After restoring the air pressure of all four tires to the standard level, press and hold the tire pressure reset button next to the gear lever to eliminate the warning light. The BMW 3 Series is a new generation sedan product from BMW Group, with a body weight of 1465kg and dimensions of 4734mm in length, 1811mm in width, and 1455mm in height. The BMW 3 Series is equipped with a 4-cylinder engine, delivering a maximum power of 110kw and a maximum torque of 200nm. In terms of performance, the vehicle features an EDC shock absorption control system, offering three tuning modes: Sport, Normal, and Comfort. The interior includes a programmable full LCD instrument panel, a touch-sensitive central control display, and a full-color head-up display system.
10
1
Share

What Causes Frequent Car Stalling?

Reasons for frequent car stalling: 1. Use of low-quality fuel causing engine carbon buildup leading to stalling; 2. Damaged fuel pump or obstructed fuel lines; 3. Clogged fuel injectors or abnormal fuel pressure causing stalling; 4. Driver's lack of proficiency or improper operation may also result in stalling; 5. Faulty spark plugs or ignition coils. Solutions for stalling: 1. At idle speed, the car doesn't move quickly—simply restart the engine after stalling. For automatic transmission cars, shift to Park or Neutral before restarting; 2. If stalling occurs while coasting, maintain steering control while gently applying brakes. Manual transmission vehicles should depress the clutch, engage the appropriate gear, then release the clutch to let the vehicle's momentum restart the engine. Automatic transmission cars need to shift to Neutral before restarting the engine.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.