What is the method for dealing with stone-like paint blown onto a car by wind?
3 Answers
Stone-like paint belongs to the category of paints. When stone-like paint is blown onto a car by wind, you can apply thinner or gasoline to the affected area to soften it, then quickly wipe it off, followed by waxing and polishing. Below is a detailed introduction about stone-like paint: 1. Overview: Stone-like paint is a coating that mimics the decorative effect of marble and granite. It is mainly made from natural stone powders of various colors and is used to create a stone-like effect on building exteriors, hence it is also called liquid stone. 2. Automotive paint: Automotive paint is primarily used to protect the car body from corrosion and secondly to enhance the vehicle's aesthetic appeal. It is a way for most car owners to express their individuality.
As someone who frequently deals with car detailing issues, I can share a detailed method: Once you notice that stone chips have been blown onto your car by the wind, don’t rush to scrub them off, as the paint spots are still wet and soft when first attached, making them prone to spreading. Immediately rinse with plenty of water to wash away most of the loose paint spots. After rinsing, if there are still residues, use a microfiber cloth dipped in a dedicated car cleaner (such as diluted car shampoo) to gently wipe them off—avoid scrubbing hard to prevent scratching the paint. If the paint spots have hardened, I’ve tried softening them with a bit of warm water and soap for about ten minutes before wiping them off with a soft cloth. For particularly stubborn spots, it’s best not to DIY and instead visit a professional car wash to handle them with specialized solvents. Afterward, remember to inspect the paint and apply protective wax or coating to prevent future paint adhesion damage. In short, ensure safety before taking action and avoid working under direct sunlight.
As a seasoned driver with years of experience, I've also faced the annoyance of real stone paint splashing onto the car body; it was during construction season with strong winds, and paint dots stuck to the car door. My advice is to immediately rinse with a garden hose—simple and effective, it can remove most of the loose paint spots. If not treated promptly, dried paint becomes more troublesome. Later, I used a mixture of warm water and car cleaner, sprayed it on, waited two to three minutes for it to soften, then gently wiped it off with a soft sponge—avoid using brushes to prevent scratches. When parking, I recommend staying as far away from construction areas as possible to minimize risk. Once the paint spots are removed, applying a good layer of wax is essential—my car's paint remained undamaged thanks to this, saving both hassle and money.
