What is the method for checking the engine oil level in a car?

[Ursula]

The method for checking the engine oil level in a car is: 1. Park the vehicle on a level surface and turn off the engine; 2. Pull the hood release lever; 3. Open the hood and use the secondary latch to prop it up; 4. Locate the yellow or orange dipstick in the engine compartment; 5. Pull out the dipstick and wipe off any residual oil with a towel; 6. Reinsert the dipstick back into its original position; 7. After pulling out the dipstick again, observe it vertically or at a 45-degree angle. The oil level should be between the min and max marks to meet the requirements. The function of engine oil is to lubricate the friction surfaces of various components inside the engine, reducing friction and wear on the parts.

[OMiranda]

When checking the engine oil level, I always park on a level surface first. After turning off the engine, I wait patiently for 5 to 10 minutes to let the oil settle and stabilize. Then, I pull out the dipstick—wearing gloves is recommended to avoid burns from residual hot oil—wipe off the oil traces with a clean cloth, reinsert it all the way back, and after counting to three seconds, pull it out again to observe. The oil level should be between the min and max marks to be normal; if it's too low, add a small amount of the same type of oil, avoiding mixing brands. Remember not to do this on a slope or right after a long drive when the engine is hot, as it can lead to misreadings and is dangerous. I check the oil level every two full tanks of gas because rapid oil consumption affects engine lubrication. If the oil appears black or has impurities, it's best to visit a repair shop early. Preventing small issues saves major repairs, and this habit has kept my car running smoothly even after 100,000 kilometers.

[VanJace]

I believe safety is the top priority, so the method to check the engine oil level is to park on level ground, turn off the engine, and wait a few minutes to avoid accidents. After pulling out the dipstick, wipe it clean, reinsert it, and then check the oil level position. Keeping the oil between the min and max marks is crucial; too low can cause engine wear, and too high may lead to leaks. Ensure the area is well-ventilated during the check, and avoid inhaling dust. If the oil level is unstable or has an unusual odor, stop driving immediately. I usually check before long trips, along with other fluids, to prevent problems. Developing a regular habit, such as monthly or by mileage, can extend the vehicle's lifespan. During rainy or snowy weather, I also check the oil cap seal to prevent water seepage and oil contamination.

[LukasRose]

I usually park on level ground, turn off the engine, and wait for five minutes. Then I pull out the dipstick, wipe it clean, reinsert it, and pull it out again to check that the oil level is between the min and max marks. If it's low, I add some oil, being careful not to overfill. I choose a shady spot to do this to prevent dust contamination. Checking once a month or during the maintenance cycle is sufficient. Avoid doing this when the engine is hot to prevent misreading and burns. Use the appropriate oil for topping up and avoid mixing different types. The process is simple and takes just two minutes, helping to maintain the engine well.