What is the method for changing the transmission oil of the Geely Vision X3?

1 Answers
BeckettDella
07/29/25 11:25am
Geely Vision X3's transmission oil can be changed using two methods: the gravity drain method and the circulation method. The functions of transmission oil are: 1. Keeping the shifting system clean; 2. Lubricating the transmission components. Taking the 2020 Geely Vision X3 as an example, it is a compact SUV with body dimensions of: length 4005mm, width 1760mm, height 1575mm, a wheelbase of 2480mm, and a curb weight of 1180kg. The 2020 Geely Vision X3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 109PS, a maximum torque of 142Nm, and a maximum power of 80kW.
Was this review help?
5
0
Share
More Forum Discussions

What to Do If You Disagree with the Traffic Accident Speed Identification?

If the speed identification result affects the liability determination of the traffic accident, you can apply for reconsideration to the traffic police team under the premise of being able to provide evidence. Generally, the driver themselves need to provide evidence related to the speed, but the final identification conclusion is still made by the traffic police department. Relevant information is as follows: 1. Basis: The liability determination by the traffic police department is not the final conclusion. For traffic accident liability and related facts, the court should base its decision on the facts of the case. 2. Application for reconsideration: You can apply for reconsideration to the higher-level public security authority regarding the accident determination; when the case enters the court trial process, you can also raise objections to the identification and request a re-identification.
13
1
Share

Where is Shentong Tire produced?

Shentong Tire is produced by Shenyang Heping Radial Tire Co., Ltd. The following is a detailed introduction to the specifications of automotive tires: Specification model representation: Tires are important components of automobiles, and there are many specifications and models of tires. Different specifications and models of tires are suitable for different types of vehicles. The specification model identification is usually on the side of the tire, represented by a series of alphanumeric characters, corresponding to the tire's tread width, aspect ratio, type, rim size, load index, and speed rating. Speed rating: According to the different maximum speeds they can bear, the speed ratings of tires can be divided into different grades from A to Z, among which grade A can be further subdivided into eight different grades from A1 to A8. The further back the letter representing the tire speed rating is, the better the tire performance.
14
3
Share

What is the speed rating code for tires?

Haval F7 body dimensions: length is 4620mm, width is 1846mm, height is 1690mm, wheelbase is 2725mm, positioned as a compact 5-door 5-seat SUV, with a minimum ground clearance of 162mm and a fuel tank capacity of 55 liters. The Haval F7 features a MacPherson strut independent front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169 PS, a maximum power of 124 kW, and a maximum torque of 285 Nm, paired with a 7-speed dual-clutch transmission.
6
1
Share

How to Turn Off the Rear Wiper of a Car?

To turn off the rear wiper of a car, simply move the wiper lever located below the steering wheel to the 'off' position. Pressing it down one notch will turn it on. The function of the wiper is to remove raindrops and dust attached to the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety. The replacement method for the car's rear wiper is as follows: 1. Lift the wiper up; 2. Press the clip underneath to remove the wiper blade; 3. Take off the wiper; 4. Pry up the front end of the middle clip; 5. Insert the wiper into the middle clip, pull it tight by hand, and once you hear a click, the replacement is complete.
19
1
Share

What are the reasons why a car always fails to start?

There are several reasons why a car always fails to start: 1. Insufficient or depleted battery power; 2. Blocked oil flow; 3. Frozen exhaust pipe or carbon buildup causing throttle valve sticking. The solutions for a car that won't start are: 1. Charge the battery promptly or replace it to avoid power shortage; 2. Park the car in a warm environment; 3. Use engine oil suitable for the current temperature conditions; 4. Increase the frequency of car usage to expel accumulated water in the exhaust pipe with stronger exhaust force; 5. Add antifreeze; 6. Regularly remove carbon deposits from the throttle valve; 7. Clean the spark plug stains; 8. Clean the fuel system.
12
2
Share

How to Maintain a Constant Speed in Subject Three?

Constant speed driving methods are as follows: 1. Control the speed: To maintain a straight line at a constant speed, generally avoid driving at a low speed in one gear for a long time or exceeding the specified speed limit. Accelerate or decelerate as required. Maintaining a constant speed ensures timely deceleration at intersections, crosswalks, and other locations, while also allowing for the calm completion of other operations in the Subject Three test. 2. Choose reference points and observe carefully: During straight-line driving, the driver should not only look straight ahead but also pay attention to the surroundings. To maintain a straight line, select appropriate reference points and make timely steering corrections, always being aware of various traffic conditions ahead to respond promptly.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.