What is the method for changing the transmission oil of the Buick Envision 1.5T?

1 Answers
VonAmy
07/30/25 3:49am
Start the engine to preheat the transmission to operating temperature; remove the oil drain bolt; after draining the old oil, reinstall the bolt. Add new ATF fluid; start the engine and shift from P to N, D, L1, L2, etc., staying in each gear for at least 5 seconds. Disconnect a cooling oil pipe from the automatic transmission; correctly connect the ATF exchanger's inlet and outlet oil pipes and the high-pressure air pipe.
Was this review help?
5
1
Share
More Forum Discussions

How to Replace the Battery in an Emgrand Key?

Emgrand key battery replacement method: 1. There is a mechanical key button on the side. Press the button and pull out the mechanical key; 2. After pulling out the key, you can see the word "open" on the front of the key, along with a small protruding area; 3. Insert a screwdriver into the small gap and rotate it clockwise to pry open the shell; 4. Insert the screwdriver into the bottom of the battery and lift it up to remove the battery, then install the new battery. The Geely Emgrand is one of the brands launched by Geely Auto. The Emgrand EX8 is positioned by Geely as a large luxury SUV, with dimensions of 4840mm in length, 1845mm in width, and 1715mm in height, and a wheelbase of 2800mm. In terms of power, the Emgrand EX8 is equipped with a 2.4L engine, delivering a maximum power of 150 horsepower and a peak torque of 210 Nm. It also features a full-time four-wheel drive system to enhance the vehicle's off-road capability.
8
2
Share

Why is the central control screen not installed in the new car?

Sometimes the dealership installs it when selling the car, so there's no need to worry. Introduction to the automotive central control system: Door lock system: The automotive central control system includes the central door lock system, allowing the driver to control all door switches and window lift systems. The central door lock system primarily features three functions: central control, speed control, and individual control. The driver can control all door locks, and when the vehicle reaches a certain speed, the doors automatically lock. Central console: A fully touch-sensitive central console means the car's central console no longer uses traditional physical button or knob designs. Instead, it employs capacitive touch technology, similar to a smartphone screen, where light touches, presses, or swipes can complete operations.
2
1
Share

What brand of tires does the Nissan X-Trail use?

The X-Trail uses a Dunlop tire model, specifically the Grandtrek series tires. Except for the top trim of the X-Trail, all other models in the lineup are equipped with Dunlop GRANDTREK series tires in the size 225/65R17. The advantages of these tires lie in their quietness and grip performance. As one of the suppliers for Mercedes-Benz and BMW, Dunlop tires are frequently used in many Mercedes-Benz models as well as BMW's X5 and 7 Series. It's worth noting that while Dunlop is technically a Japanese manufacturer, its research, development, and production are based in Europe, making it somewhat of a half-European brand. The Grandtrek series achieves a perfect balance between performance on paved and unpaved roads, delivering stable handling in all road conditions. The combination of a straight central rib tread pattern and full belt layers significantly enhances handling stability at high speeds. The 2-in-1 shoulder tread block and small shoulder groove design improve quietness and ride comfort.
3
2
Share

What is the speed limit on roads without center lines?

When driving a motor vehicle on urban roads without a center line, the maximum speed should not exceed 30 kilometers per hour. Here is more information about speeding: Speeding penalties: If the speed limit is 80 and you drive at 85, it is considered speeding, but since it does not exceed 10% of the speed limit, you will not be fined or receive penalty points, but you may receive a warning. If you exceed the speed limit by more than 10% up to 20%, you will be fined and receive 3 penalty points. If you exceed the speed limit by more than 20% up to 50%, you will be fined. Legal basis for speeding: Article 86 of the "Road Traffic Safety Law of the People's Republic of China."
15
1
Share

Why doesn't the chassis scrape when going uphill diagonally?

Temporarily increases the ground clearance of the front and rear axles. More details are as follows: Reducing undercarriage scraping: Generally, cars have a certain amount of ground clearance, which is the distance between the chassis and the road surface. If the ground clearance is not high, it is easy to scrape the chassis when going uphill or downhill. Going uphill diagonally can reduce the uphill angle and minimize the occurrence of undercarriage scraping. Steep slopes: When encountering steep slopes or non-standard speed bumps, if you are not confident about the vehicle's ground clearance, you can choose to go uphill diagonally. This allows the vehicle to align sideways with the uphill road surface as much as possible. Once the front and rear axles have successfully passed, you can straighten the vehicle. This reduces the risk of scraping the front lip due to insufficient approach angle and also minimizes the risk of the rear axle being too long and scraping the underside due to insufficient angle when going uphill.
15
2
Share

What are the precautions for beginners driving diesel vehicles?

Precautions for beginners driving diesel vehicles are as follows: Starting the diesel engine: Idle until the water temperature reaches 50 degrees Celsius and the oil pressure is normal before starting. Release the parking brake lever before starting: Press the clutch pedal all the way down with your left foot, shift gears with your right hand, gradually press the accelerator pedal with your right foot while slowly releasing the clutch with your left foot for a smooth start. Do not keep your left foot on the clutch frequently: While driving, do not keep your left foot on the clutch frequently to prevent premature wear of the clutch friction plates. Try to drive at medium speed in high gear on flat roads: When going uphill, shift to a lower gear in time. When going downhill, you can engage a lower gear to utilize the auxiliary power of the diesel engine for safer driving.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.