What is the method for changing engine oil by yourself?
1 Answers
First, use a jack to lift the vehicle, then unscrew the oil drain plug to drain the oil, replace the oil filter and gasket, and finally add the appropriate new engine oil in the engine compartment. The steps for changing engine oil by yourself are as follows: 1. Preheat before changing the oil: Use a jack to lift the vehicle, and it's best to prepare wedge-shaped wooden blocks for support to prevent the jack from slipping. 2. Locate the oil drain plug, unscrew it to drain the oil, and be cautious of the oil temperature to avoid burns: Allow the oil to drip for a while to ensure thorough drainage. Do not overtighten to prevent damage to the oil pan. 3. Unscrew the filter and place a container beneath it: Observe the filter carefully, and wear gloves if the temperature is too high. Be careful not to damage the filter mounting screw or the components around the filter. 4. Select the appropriate oil filter. 5. Apply new engine oil to the gasket of the new filter, then screw and tighten the filter (usually tighten it and then turn it an additional 3/4 turn). 6. Next, add new engine oil. To prevent oil from spilling outside the engine, you can use a funnel. After adding the oil, check for any leaks underneath the engine. If everything is normal, check the oil dipstick and then start the engine.
