What is the method for changing brake fluid in the Axela?

1 Answers
StAlaina
07/29/25 2:09pm
To extract the brake fluid from the Axela, a specialized extraction container is required, and it is recommended to avoid using the traditional pedal-pumping method. Tutorial for replacing brake fluid in the Axela: First, extract the old brake fluid from the reservoir in the engine compartment. The extraction process should last for more than ten seconds. Then, use the extraction container to remove the fluid and air from the brake lines. Connect the rubber hose of the extraction container to the bleeder valve of the master cylinder. Gradually extract the brake fluid while having a partner slowly pour new brake fluid into the reservoir. Functions of brake fluid: Effectively lubricates the moving parts of the braking system, extending the lifespan of brake calipers and seals. Provides anti-corrosion and anti-rust protection, ensuring no damage to metal and non-metal materials in the braking system. Adapts to various environmental conditions, ensuring reliable transmission of braking force under high temperature, extreme cold, high speed, and humid conditions. Also serves to transfer energy and dissipate heat.
Was this review help?
6
3
Share
More Forum Discussions

What are the regulations on vehicle scrapping age limits?

Non-commercial vehicles and commercial vehicles have different scrapping age limits, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat sedans and 7-seat SUVs, as well as small and micro non-commercial vehicles, there is no usage age limit. When the normal mileage reaches 600,000 kilometers, the state will guide the scrapping. In addition to the above vehicles, small and micro non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no usage age limit. Common scrapping regulations for commercial vehicles: Small and micro taxi passenger vehicles have a scrapping age limit of 8 years, medium-sized taxi passenger vehicles have a limit of 10 years, and large taxi passenger vehicles have a limit of 12 years. Public transport passenger vehicles have a scrapping age limit of 13 years, other small and micro commercial passenger vehicles have a limit of 10 years, and large and medium-sized commercial passenger vehicles have a limit of 15 years. Micro commercial trucks have a scrapping age limit of 8 years, light and large commercial trucks have a limit of 10 years. The vehicle scrapping process is as follows: The vehicle owner applying for scrapping and renewal must fill out the "Motor Vehicle Change, Transfer, Modification, Suspension, Scrapping Approval Application Form" in duplicate and affix the owner's seal. The registration office accepts the application and issues a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping age. For vehicles that have not reached the scrapping age, after inspection by the motor vehicle inspection office and confirmation that they meet the scrapping standards, a "Vehicle Scrapping Notice" is issued. The vehicle owner chooses a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company dismantles the vehicle and takes photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The owner submits the "Change Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection office for verification and signature. The license plates are then reclaimed, and the scrapping registration is processed according to regulations. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if a vehicle cannot be driven back to the registration location due to damage, the owner may sell the scrapped vehicle to a local motor vehicle recycling company. Commercial vehicles converted to non-commercial use must be scrapped according to the original commercial vehicle scrapping time. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or cancellation of motor vehicle registration, the original owner may apply to the vehicle management office to use the original license plate number when registering a newly purchased motor vehicle. The application must meet the following conditions: (1) submitted within six months after the transfer or cancellation; (2) the owner must have owned the original vehicle for more than three years.
9
5
Share

What is the fuel consumption of the Nissan Kicks?

The fuel consumption of the Nissan Kicks is approximately 5.6L/100km. Below is an introduction to the Nissan Kicks: 1. Nissan Kicks: The Nissan Kicks is equipped with a 1.5-liter naturally aspirated engine across all variants, delivering a maximum horsepower of 124 hp, a maximum power of 91 kW, and a maximum torque of 153 N·m. 2. Displacement and Fuel Consumption: For small-displacement naturally aspirated engines, fuel consumption is inherently low. If you drive steadily, the car can be very fuel-efficient. Below are some extended tips on how to save fuel: 1. Good Driving Habits: It is essential for drivers to maintain good driving habits. If a driver frequently engages in aggressive driving, such as heavy acceleration and hard braking, the engine load will increase, leading to higher fuel consumption. Conversely, if the driver drives smoothly, with gentle acceleration and braking, the engine will operate more steadily, resulting in lower fuel consumption. 2. Fuel Quality: Always try to use high-quality fuel when refueling. High-quality fuel not only burns more efficiently, reducing fuel consumption, but also helps extend the engine's lifespan to some extent.
16
3
Share

What causes abnormal noise when stepping on the accelerator?

The reasons for abnormal noise when stepping on the accelerator are as follows: 1. Loose dashboard or console: During operation, the engine needs to intake a large amount of air. If the air is not filtered, suspended dust in the air will be sucked into the cylinder, accelerating the wear of the piston group and cylinder. Larger particles entering between the piston and cylinder can cause severe "cylinder scoring." The air filter, installed in front of the carburetor or intake pipe, filters out dust and sand particles from the air, ensuring sufficient and clean air enters the cylinder. 2. Clutch malfunction: Another method is to pull out the oil dipstick and check if the abnormal noise persists when stepping on the accelerator. If not, it might be a clutch issue. The turbocharger generates compressed airflow noise during operation. When the engine is revving up or the accelerator pedal is pressed deeply, the engine noise becomes louder. To avoid this, press the accelerator gently and avoid flooring it suddenly, as abruptly pressing it all the way down can cause such abnormal noise.
19
1
Share

What causes the left side of the Audi A6 air conditioning to be cold and the right side hot?

Audi A6 experiencing cold air on the left and hot air on the right can be attributed to the following reasons: 1. Damage to the air conditioning warm water regulating valve, caused by an internal short circuit in the warm water valve. 2. Motor failure, leading to the inability to switch air ducts. Below is an introduction related to car air conditioning: 1. When the heating function is turned on, the high-temperature coolant from the car's engine flows through the heater core, and the air blown by the blower also passes through the heater core, allowing warm air to blow out from the air conditioning vents. 2. The cooling principle of car air conditioning is slightly more complex. After pressing the AC button, the compressor clutch engages, enabling the engine to drive the compressor. The compressor continuously compresses the refrigerant and sends it to the evaporator.
19
3
Share

Is There a Toll on Highways During Mid-Autumn Festival?

During the Mid-Autumn Festival, tolls are required for highway travel. Below are the specific details about highway travel during holidays: 1. Toll: Normal tolls apply during New Year's Day, Dragon Boat Festival, and Mid-Autumn Festival. 2. Free: Highways are toll-free during the Spring Festival, Qingming Festival, May Day Labor Day, and National Day. Here is additional information about highway travel for vehicles: 1. Pure Electric Vehicles: Pure electric vehicles must meet the following conditions to travel on highways: The pure electric vehicle should be produced by a legitimate manufacturer and possess relevant qualifications such as the vehicle registration certificate and certificate of conformity issued by national quality supervision departments. The vehicle must have a special new energy vehicle license plate and a motor vehicle driving license issued by the traffic management department. The vehicle's maximum speed must meet the highway speed requirements. 2. Highway Travel Conditions: On highways within our province, drivers must hold a C2 or higher driver's license. The vehicle must be a motor vehicle registered with the traffic management department of the public security authority. Temporary travel permits should be obtained for temporary road use, and the vehicle must display the motor vehicle license plate, inspection qualification mark, insurance mark, and carry the motor vehicle driving license.
16
0
Share

How to Turn on Both Front and Rear Fog Lights Simultaneously?

Generally, with a stalk-type light controller, turning the fog light switch up one notch will activate the front fog lights, while turning it up two notches will turn on both the front and rear fog lights simultaneously. Here’s how to use fog lights properly: 1. Fog lights have strong penetration and can somewhat rival high beams. However, they should not be used in non-foggy or non-rainy conditions, as they may affect other drivers and compromise road safety. 2. When encountering heavy rain or thick fog with low visibility, drivers must turn on their fog lights. If visibility drops below 100 meters, failing to activate the rear fog lights increases the risk of rear-end collisions, leading to unnecessary losses. 3. During foggy or rainy conditions, avoid using high beams. While high beams illuminate distant areas at night, they are ineffective in dense fog. The light from high beams scatters due to diffusion, impairing the driver’s vision. If visibility is extremely poor, it’s best to avoid driving altogether.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.