What is the method for adding windshield washer fluid?
3 Answers
The method for adding windshield washer fluid is: 1. Use the wiper control knob to first spray out the old washer fluid; 2. After completely spraying out the existing fluid, open the washer fluid reservoir and add a small amount of new washer fluid solution; 3. Activate the washer spray function again to flush out any remaining old fluid; 4. When no more fluid sprays from the nozzles during the second activation, refill with new washer fluid and securely close the cap. Windshield washer fluid consists of water, alcohol, and ethylene glycol, serving as a cleaning liquid for vehicle windshields. Its functions include: 1. Windshield cleaning via wipers; 2. Anti-freeze and anti-fog properties.
The first time I added windshield washer fluid, I was quite nervous, thinking it would be troublesome to open the hood. But it turned out to be super easy. There's a cap in the engine compartment with a wiper icon on it, and you can just pry it open gently. Remember to choose the right type of windshield washer fluid—just regular anti-dirt fluid for summer, but switch to antifreeze in winter to prevent the nozzles from getting clogged by ice. Don't pour too quickly, or it might spill onto the engine. Last week, I added some by tilting the bottle and pouring slowly until it was full but not overflowing. Finally, just close the cap, and you're done. It's recommended to check the fluid level monthly; too little can affect the wiper's cleaning performance, and poor visibility while driving increases danger. Newbies, don't worry—watch a few videos, and you'll get the hang of it.
I've been adding windshield washer fluid for over a decade, always starting by retrieving the dedicated bottle from my home garage. Pop open the hood, locate that blue cap (usually marked with a wiper symbol), and twist it off. Before pouring, do a quick check – using a multimeter to test the fluid level is the safest approach. Be careful not to use the wrong fluid: standard supermarket-bought solutions work for warm weather, while winter demands high freeze-resistant formulas. Keep a steady hand when pouring, don't hold the bottle too far above the reservoir to avoid messy drips. After topping up, wipe any spills and secure the cap tightly. This routine prevents nozzle clogs, maintains clear visibility, and enhances driving safety. Make it a habit to check the fluid level before driving – it beats discovering an empty reservoir mid-journey.
