What is the Mercedes-Benz model with a 'B' logo called?

1 Answers
DiMaddox
07/29/25 1:40pm
The Mercedes-Benz with a 'B' logo is called Brabus. Here is some extended information about Brabus: Introduction to the Brabus brand: Brabus is a German automotive brand, primarily specializing in the production of modified vehicles. Introduction to the Brabus M-Class: Taking the Brabus M-Class as an example, it is a mid-to-large-sized SUV with a 5-door, 5-seat configuration. The vehicle's dimensions are: length 4804 mm, width 1926 mm, height 1796 mm, with a wheelbase of 2915 mm and a fuel tank capacity of 95 liters. The Brabus M-Class is equipped with a 3.5L naturally aspirated engine, delivering a maximum power output of 225 kW at 6500 rpm and a maximum torque of 370 Nm between 3500 to 5250 rpm. It features a double-wishbone independent front suspension and a multi-link independent rear suspension.
Was this review help?
11
5
Share
More Forum Discussions

What brand of tires does Audi use?

Audi equips different models and configurations with various tire brands, primarily including Goodyear, Michelin, Dunlop, and Hankook. Tire sizes include 245/35R19, 245/40R18, and 225/45R17. Among them, the American Goodyear Tire & Rubber Company was founded in 1898 and has over a century of history. Goodyear is the world's largest tire manufacturing company, headquartered in Akron, Ohio, USA. The company primarily produces tires, engineered rubber products, and chemical products in over 90 factories across 28 countries. Today, Goodyear employs more than 80,000 people worldwide. For Audi tires during daily use, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread wears out, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks may pose a hidden danger of tire blowouts during high-speed driving. Additionally, promptly remove pebbles from the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, the driver should not turn the steering wheel, as this accelerates tire wear. Do not splash water to cool down. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure may increase. In such cases, stop to allow the tires to cool naturally. Avoid releasing air to reduce pressure or splashing water to cool down, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent use of brakes and hard braking to prevent accelerated tread wear caused by dragging between the tires and the ground.
4
5
Share

How to Solve Engine Pressure Failure?

Engine pressure failure solutions are as follows: 1. Clean carbon deposits: Engine carbon deposits are mainly caused by engine oil entering the cylinder and participating in combustion. Since the main components of engine oil are different from gasoline, engine oil cannot burn quickly. A large amount of carbon deposits can cause the cylinder walls to narrow, leading to excessive pressure. At this time, carbon deposit cleaning of the engine is required. 2. Change the engine oil: Replace the vehicle's engine oil. If the oil is not changed for a long time, it can easily cause a large amount of carbon deposits in the engine, leading to excessive engine pressure. 3. Check the pressure sensor: Inspect whether the engine pressure sensor is damaged. If the sensor is damaged, it can also lead to false alarms.
5
1
Share

Should Borgward cars use 92 or 95 octane gasoline?

Borgward models equipped with naturally aspirated engines require 92 octane gasoline, while those with turbocharged engines need 95 octane gasoline. When refueling, you can check the manufacturer's recommended gasoline grade on the fuel tank cap. Most turbocharged engines require 95 octane gasoline because the temperature and pressure inside the cylinders are relatively high during operation. Borgward's smart factory adopts an eight-model flexible production line, which not only provides flexible production capabilities but also enables multi-model co-production. It supports the production and development of personalized customized models, integrating six major process flows: stamping, welding, painting, assembly, inspection, and logistics.
16
4
Share

Where is the Lexus Vehicle Speed Sensor Located?

Lexus's vehicle speed sensor is installed near the differential. Here is some relevant information about Lexus: 1. Introduction: Lexus (Japanese: レクサス, English: Lexus) is a luxury car brand under the Toyota Group, established on September 1, 1989, and sold in global markets. Unlike other car manufacturers under the Toyota Group, Lexus was founded specifically to produce luxury vehicles. 2. Design Style: The latest 19-inch titanium black aluminum alloy wheels not only enhance the IS F's dynamic performance but also give it a futuristic and robust design style.
14
0
Share

What Causes Squeaking Sounds When Turning the Tires?

When a car turns, the squeaking sound from the tires is caused by friction between the rubber and the road surface, which is a normal phenomenon. This occurs because the car's inertia moves it forward while turning, resulting in resistance and friction between the tires and the ground. Car tires produce varying levels of noise depending on factors like road type, surface irregularities, driving speed, tire type, and tire pressure. Other possible reasons for unusual tire noises during turns include: First: The sound of tires rubbing against the ground, which may indicate a need for wheel alignment; Second: A rattling sound could suggest an issue with the CV joint, requiring replacement; Third: A metallic scraping noise might mean the brake pad shield is rubbing against the brake pad, which can be fixed by adjusting the shield with a screwdriver.
5
0
Share

Which gear should be used when pulling over?

Pulling over requires shifting to first gear. Here are the relevant details: 1. Pulling Over: Pulling over is a clearly defined assessment item in the road test, requiring the student to drive the vehicle to the side and stop. 2. Precautions: When pulling over, parking is not allowed at intersections, railway crossings, curves, narrow roads, narrow bridges, steep slopes, tunnels, or within 20 meters of these locations; parking is also prohibited in sections with pedestrian barriers (hedges), crosswalks, construction areas, or opposite obstacles; additionally, parking is not allowed near bus stops, tram stops, emergency stations, gas stations, fire hydrants, or in front of fire stations, or within 30 meters of these locations.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.