What is the measured minimum ground clearance of the Volkswagen Teramont?

1 Answers
Venus
07/30/25 7:24am
The measured minimum ground clearance of the Volkswagen Teramont is 160mm. The minimum ground clearance reflects the vehicle's ability to pass over obstacles or uneven ground without collision. Taking the 2020 Volkswagen Teramont as an example, it belongs to the mid-to-large SUV category, with body dimensions of: length 5039mm, width 1989mm, height 1773mm, and a wheelbase of 2980mm. The 2020 Volkswagen Teramont features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 186PS, a maximum power of 137kW, and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
4
1
Share
More Forum Discussions

How Much Impact Does Replacing a Car Door Have on the Vehicle?

Replacing a car door can have several impacts on the vehicle, including potential color mismatches in the paint and reduced sound insulation. If a door replacement is necessary, it is advisable to have it done at a 4S shop. Additionally, replacing a door might also degrade the vehicle's sound insulation from external noise. If the door is not replaced through official channels, issues with assembly techniques or details may arise, leading to problems such as air leaks or increased noise during high-speed driving. Furthermore, from a vehicle warranty perspective, car doors are not considered wear-and-tear parts. Any replacement can raise suspicions of prior collision damage, potentially classifying the car as an accident vehicle. This can depreciate the car's value, and if sold as a used car, the price may be significantly discounted. Important considerations when replacing a car door: Check if the gaps around the car door are uniform and the surface is smooth; otherwise, unusual noises may occur. Test the door's sealing integrity to prevent issues like water or air leaks. Repeatedly open and close the door to ensure smooth operation and the absence of unusual sounds.
3
3
Share

What engine does the Changan CS35 use?

Changan CS35 is equipped with the Blue-Core efficient H-series 1.6L engine. The following are the relevant details: 1. The CS35 is powered by a new generation Blue-Core efficient H-series 1.6L engine. This new generation Blue-Core H-series efficient engine delivers a maximum output power of 125 horsepower and a maximum torque of 160N·m. Its maximum power reaches 121kW, and the maximum torque reaches 250N·m. 2. In terms of exterior configuration, the differences between different trim levels are minimal. All models come standard with a shield-shaped chrome front grille, eagle-eye crystal diamond lens headlights, embedded fog lights, side mirrors with integrated turn signals, and dynamic V-shaped aluminum alloy wheels. Additionally, dual-wing dynamic combination taillights, a dynamic spoiler with integrated high-mounted brake light, shark fin antenna, multifunctional roof rails, chrome exhaust pipe, and engine decoration cover are also standard exterior features across all Changan CS35 models. 3. For the interior, all Changan CS35 models feature a three-dimensional floating center console, dual-barrel deep-sea ice-blue instrument panel, and leather door armrests.
18
3
Share

Where to Find the Engine Code?

The engine model is designated by the engine manufacturer in accordance with relevant regulations, enterprise or industry conventions, and the attributes of the engine. There are three methods to locate the engine number: 1. Check the engine number on the vehicle's driving license. 2. Look for a row of very small numbers located at the bottom of the windshield directly in front of the driver's seat; this is the engine number. 3. Open the front engine hood, and the engine number can be seen on the flat plate to the right of the engine throttle. The meaning represented by the automobile engine number is as follows: 1. Front Part: Includes the product series code, generation symbol, and regional or enterprise code. Manufacturers may choose appropriate letters as needed, but these must be approved and filed by the industry standard's standardization unit. 2. Middle Part: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. 3. Rear Part: Composed of symbols for structural features and usage characteristics. 4. Tail Part: Distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same product series, the manufacturer selects an appropriate symbol to represent it. The rear part and the tail part can be separated by a hyphen (-).
14
4
Share

How to reset the maintenance light on GAC Trumpchi GA8?

Steps to reset the maintenance light on Trumpchi GA8: 1. Turn off the ignition switch and shut down the engine. 2. Press and hold the right button (reset/zero) on the instrument panel with your left hand. 3. Turn on the ignition switch. 4. Continue holding the "reset/zero" button with your left hand until the maintenance light enters reset mode, then release the right button (reset/zero button). 5. Within 20 seconds of releasing the right button, press the left "menu button" once to confirm the reset. Here is some relevant information: 1. To ensure normal vehicle operation, manufacturers have installed reminder indicator lights that activate after certain mileage intervals, prompting owners to replace parts promptly. However, sometimes owners may not intend to perform maintenance so soon, hence the need to clear the maintenance reminder light. 2. The original purpose of the vehicle maintenance light is to remind owners to perform maintenance as soon as possible. Owners should promptly visit a 4S shop for maintenance, after which the shop will use a diagnostic tool to reset the maintenance light. The fastest and most accurate method to clear the maintenance reminder light is by using a diagnostic tool, which most individual owners don't possess. It is recommended that owners clear the reminder light after maintenance at a 4S shop or visit an external 4S shop for this service.
15
4
Share

Where are the airbags located in the Volkswagen Lavida?

Volkswagen Lavida airbags are located in the center of the steering wheel, the front panel of the passenger compartment, the left side of the driver's seat backrest, and the right side of the passenger seat backrest. The function of airbags is to reduce the severity of occupant injuries in the event of a collision. Information about airbags is as follows: 1. Airbags are a safety feature in cars, consisting of airbag sensors, impact airbags, and electronic control devices. 2. Airbags distribute the impact force evenly across the head and chest, preventing fragile passengers from directly colliding with the vehicle body and reducing the likelihood of injury. 3. Airbags effectively protect passengers during frontal collisions, and even if seat belts are not fastened, the impact airbags are sufficient to significantly reduce injuries.
20
1
Share

Where is the cabin air filter of Zotye SR7 located?

Zotye SR7's cabin air filter is located in the glove compartment area. Release the side clips and lower the glove compartment to reveal the cabin air filter cover. For typical urban family cars, it's recommended to replace the cabin air filter every six months or once a year. Consider replacing the cabin air filter under the following circumstances: 1. If the airflow from the AC vents significantly decreases, the cabin air filter might be clogged. First clean the filter, or replace it if necessary. 2. The cleaning frequency depends on road conditions (dusty roads, etc.), and earlier cleaning is recommended. 3. The cabin air filter should be properly installed in its position. Using the AC without the cabin air filter may degrade dustproof performance and affect AC performance.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.