What is the measured ground clearance height of the 2021 Teana?

1 Answers
Billy
07/30/25 5:17am
The measured ground clearance height of the 2021 Teana is 132mm. The minimum ground clearance of the 2021 Teana refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. Generally, the higher the ground clearance of the 2021 Teana, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds may decrease. The 2021 Teana is a premium mid-to-high-end luxury sedan under the NISSAN brand. The dimensions of the 2021 Teana are 4901mm in length, 1850mm in width, and 1450 (1447)mm in height, with a wheelbase of 2825mm. Typically, the ground clearance of sedans ranges between 110mm and 150mm, while SUVs have a ground clearance between 200mm and 250mm. However, the ground clearance of the 2021 Teana is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and road conditions. For urban driving with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a higher ground clearance is advisable to improve off-road performance and avoid undercarriage damage.
Was this review help?
14
1
Share
More Forum Discussions

How Long Does It Take for Car Paint to Fully Dry?

Generally, after a car is painted, it can dry in two days during the summer when temperatures are higher. In winter, the drying time depends on the temperature and can take up to four to seven days. If baking is applied, it only takes about two hours. Below are some related details: 1. Small Areas: Small area painting can dry in half a day, while a full car paint job requires two days. 2. Precautions: If the car has just been painted, avoid exposing the newly painted areas to water and dust. It's best not to drive the car in the rain shortly after painting, as the fresh paint is still delicate and can be marked by rain, some of which may not be removable by polishing. It's advisable to park the car in a garage overnight.
20
0
Share

What is the minimum ground clearance of the new Corolla?

The minimum ground clearance of the new Corolla is 145mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the supporting surface when the car is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. The new Corolla is a Toyota model equipped with a newly developed inline 4-cylinder 1.8L engine featuring dual VVTi technology, paired with either a 6-speed manual transmission or a 4-speed automatic transmission. In terms of body dimensions, the new Corolla measures 4545mm in length, 1760mm in width, and 1490mm in height, with a wheelbase of 2600mm.
18
0
Share

What does SOR mean in the automotive industry?

In the automotive industry, SOR refers to the product specification requirements issued by the customer to suppliers. Detailed definition of SOR in the automotive industry: SOR in the automotive industry is a document sent to suppliers during the bidding process after a project is initiated. It contains detailed requirements regarding product price, quality, quantity, and other aspects. Other definitions of SOR include Environmental Science and Technology, Special Operating Requirements, Successive Over-Relaxation, Standard Operating Report, and Strategic Outlook Report. Contents included in automotive industry SOR: SOR includes material management records, production operation records, quality inspection and management records, equipment operation and management records, sanitation operation and management records, sales records, validation reports and validation records, personnel training and assessment records, and document distribution.
1
2
Share

Is There a Fine for Not Wearing a Seat Belt in the Back Seat?

Sitting in the back seat without wearing a seat belt will result in a fine. Below is an introduction to seat belt-related information: 1. The dangers of not wearing a seat belt are: In the event of a vehicle accident or emergency braking, a huge inertial force will be generated. Depending on the driving speed and the degree of impact, this inertial force varies. The inertial force causes the driver and passengers to collide with objects inside the car, such as the steering wheel, windshield, seat backrest, and doors, which can easily cause serious injuries to the occupants, or even eject them from their seats or out of the vehicle. 2. The function of the seat belt: The function of the seat belt is to reduce the possibility of death or serious injury in a traffic collision by reducing the secondary impact force that poses an internal collision risk. It ensures the maximum effectiveness of the airbag by properly positioning the occupant and prevents the occupant from being ejected from the vehicle or the vehicle from rolling over during a collision.
5
0
Share

Can a Tire with a Nail Puncture but No Air Leak Still Be Used?

Tire with a nail puncture but no air leak cannot continue to be used and should be repaired as soon as possible. The functions of a tire are: 1. To transmit driving force, braking force, and steering force for vehicle operation; 2. To support the vehicle load; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations from damaging vehicle components. Tire maintenance methods include: 1. Regularly cleaning stones stuck in the tire treads; 2. Minimizing exposure to direct sunlight; 3. Promptly checking tire pressure; 4. Paying attention to suspension maintenance; 5. Periodically inspecting front wheel alignment; 6. Adopting careful driving practices, such as choosing smooth road surfaces and avoiding objects that could puncture or scratch the tires, as well as chemical spills that may corrode the tires.
8
3
Share

Why was the Toyota E'Z discontinued?

Toyota E'Z was discontinued due to poor sales. Here is the expanded content: 1. The Toyota E'Z was an MPV introduced by GAC Toyota for domestic production in 2001. It is a Japanese brand but features a distinctly European design and was marketed in Europe under the name Verso. 2. The front leather seats of the Toyota E'Z offer excellent support and wrapping. The second-row seats provide reasonable space, with the advantage of independent seats that can be adjusted automatically for distance. The third row is not suitable for long rides, as it may feel cramped. 3. Compared to other models, the Toyota E'Z's exterior was considered too slim, and its interior was relatively cheap with low configurations. Additionally, its marketing approach failed to attract sufficient attention.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.