What is the meaning of the vehicle identification number?

How to remove the spare tire on Ford Transit Custom?

There is a square hole under the spare tire. Take out the long rod from the vehicle tools and insert it into the hole. Turning clockwise installs the spare tire, while turning counterclockwise loosens it. Below are specific details about the spare tire of Ford Transit Custom: 1. Function of spare tire: The spare tire serves as a backup for your vehicle. In case of a flat tire or other wheel issues, the spare tire allows for timely replacement, preventing the vehicle from breaking down midway. 2. Routine inspection of spare tire: Spare tire inspection mainly involves checking tire pressure and looking for wear or cracks. Replace the tire before the tread wears down to the wear indicator line. If there are fine cracks on the tire sidewall, avoid using it for long-distance or high-speed driving as the thinner sidewall increases the risk of blowouts during high-speed travel.

19

0

Share

What does x1000rpm mean?

x1000rpm represents the real-time engine speed, indicating that the corresponding number X is multiplied by 1000 revolutions per minute. When the pointer is at position 1, it means the current engine speed is 1100 revolutions per minute. The engine speed directly affects the number of work cycles per unit time or the effective power output of the engine, meaning the engine's effective power varies with different speeds. Therefore, when specifying the effective power of an engine, the corresponding speed must also be indicated. The effective power and its corresponding speed specified on the engine's product nameplate are referred to as the rated power and rated speed, respectively. The operating condition of the engine at rated power and rated speed is called the rated operating condition.

8

1

Share

How to reset the trip meter of Baojun 530?

The instrument panel has a protruding small round button. Press and hold this button for a while to reset the meter. Below are the relevant methods to reset the trip meter of Baojun 530: 1. Switch the display interface, which can show five tab interfaces: driving information, fault information & settings, multimedia information, Bluetooth phone information and navigation information. Use the up/down selection keys to switch between options under each tab. The confirmation key is used to confirm the settings. Under the trip mileage interface, long press this button to reset the trip mileage and average fuel consumption. 2. Remove the instrument panel, take off the instrument cover, and remove the pointers for speed, fuel gauge, water temperature, and RPM. Then use a flat-head screwdriver to adjust the mileage gear, which can roll back or reset the mileage.

9

5

Share

Will Leaving the Car Lights on Overnight Have Any Impact?

Leaving the car lights on overnight may lead to a drained car battery, preventing the vehicle from starting the next day, and requiring the battery to be recharged. Here is some information about car lights: 1. Car lights refer to the lamps on a vehicle, serving as tools for road illumination during nighttime driving and as signaling devices for various vehicle movements. 2. Car lights are generally categorized into headlights, taillights, turn signals, etc. 3. The combined headlights are located at the front of the vehicle, primarily serving illumination and signaling purposes. The light emitted by the headlights illuminates the road conditions ahead, enabling the driver to operate the vehicle safely at night. 4. The combined taillights are positioned at the rear of the vehicle, mainly serving illumination and signaling functions.

2

4

Share

Which gear starts faster, D or L?

D gear starts faster than L gear. The following is a detailed introduction to car gears: 1. P gear is the parking gear: When the gear lever is in the P position, the transmission is in neutral, but the output shaft is mechanically locked. At this time, the car will stop in place even without stepping on the brake. It is generally used for long-term parking of the car. When engaging the P gear, the car must be completely stationary. Do not engage the P gear when the car has not come to a complete stop, and the handbrake must be applied. When parking on a slope, the handbrake should be applied first before engaging the P gear. 2. R gear is the reverse gear: When the gear lever is in the R position, the rotation direction of the transmission output shaft is opposite to that of the engine, allowing the car to move backward. When engaging the R gear, the car must be completely stationary. Do not engage the R gear when the car has not come to a complete stop. 3. N gear is the neutral gear: When the gear lever is in the N position, the gears inside the transmission are in free rotation, and the clutch is not engaged, resulting in the minimum load on the transmission. The N gear is generally used for short-term parking, such as waiting at a red light, and the transmission should also be in the N gear when the car is being towed. 4. D gear is the drive gear: When the gear lever is in the D position, the gears inside the transmission automatically switch between the lowest and highest gears according to the vehicle speed, throttle opening, and other factors based on the preset shifting pattern. In most cases, the D gear can be used for driving.

17

2

Share

How Many Kilometers Can BYD New Energy Vehicles Run?

The range of BYD pure electric vehicles is between 305 kilometers and 520 kilometers, influenced by the energy density of the vehicle's battery. Methods to increase the range are as follows: Try not to increase the vehicle's weight. Maintain tire pressure at the standard value (AionS standard tire pressure is 250kPa). Choose roads with relatively better surfaces whenever possible. At high speeds, wind resistance significantly impacts electricity consumption; control your speed and avoid excessively high speeds. Frequent rapid acceleration and deceleration increase electricity consumption; try to start smoothly and maintain a constant speed. Using single-pedal mode and extreme energy-saving mode results in lower electricity consumption and more energy recovery, which can increase the range to some extent. Use the air conditioning wisely; it is recommended to set the temperature between 24-26°C with lower fan speed. Use the vehicle's comfort features (such as seat welcome function, seat ventilation, and heating) reasonably as needed. Use lights, multimedia, and other functions reasonably as needed. Prefer slow charging whenever possible (the charging cutoff strategy is determined by the single-cell voltage reaching a certain value. With DC fast charging, the charging current is relatively large, and the single-cell voltage rises quickly. When fast charging shows full, it may not actually be fully charged). 11. It is recommended to plug in the charging gun to preheat the battery before and after using the vehicle in winter (when the battery temperature is low, the temperature control system HVH will activate to heat the battery, consuming some electricity. Choosing plug-in heating can replenish the electricity consumed by the heater in time, improving the range).

13

0

Share

What is the meaning of the vehicle identification number?

How to remove the spare tire on Ford Transit Custom?

What does x1000rpm mean?

How to reset the trip meter of Baojun 530?

Will Leaving the Car Lights on Overnight Have Any Impact?

Which gear starts faster, D or L?

How Many Kilometers Can BYD New Energy Vehicles Run?

Where is the air filter located in the Cadillac XTS?

Why does the BMW 3 Series air conditioning suddenly have weak airflow?

What Causes the Warning Light to Illuminate in the Buick LaCrosse?

BYD Qin Pro or Buick Velite 6: Which One to Choose?