What is the meaning of the MG logo?

What is the difference between the car's internal circulation and external circulation?

Internal circulation means that the air inside the car circulates when the car is closed. The icon is a closed car interior with a circulating arrow; while external circulation means that the air outside the car flows into the car. The icon is an unclosed car with an external air arrow pointing into the car. The specific differences are as follows: 1. Internal circulation refers to the air inside the car being heated or cooled before being sent back into the car; external circulation refers to the air outside the car being heated or cooled before being sent into the car, which means gas exchange between the inside and outside of the car. 2. Generally, when we turn on the air conditioning for cooling or heating, we can first turn on the internal circulation to quickly lower or raise the temperature inside the car; when the temperature stabilizes, we can appropriately switch to external circulation to exchange air with the outside. If the air quality outside the car is not good, such as in traffic jams with a lot of exhaust fumes or in underground parking lots, do not turn on the external circulation. If you are driving on the highway, do not open the car windows, just turn on the external circulation. When the air outside is good and you feel stuffy inside the car, quickly turn on the external circulation for air exchange; if you want to maintain the air inside the car, turn on the internal circulation.

6

4

Share

How to Use Cruise Control on Baojun 510?

Here are the operating steps for cruise control on the Baojun 510: 1. Press the ON/OFF button to activate cruise control. The CRUISE/MAIN indicator light will illuminate, indicating the cruise control system is operational. 2. Accelerate to the desired speed using the accelerator pedal, then press the SET/COAST button (allowed when speed exceeds 30Km/H) to set the current speed. The CRUISE indicator light will illuminate. Release the accelerator pedal, and the vehicle will maintain the set speed. Keep your right foot near the brake pedal to handle emergencies. 3. During cruise control, press the RES/ACCEL button to increase speed or the SET/COAST button to decrease speed, adjusting the cruising speed as needed. Additional information for cruise control operation on curves or when decelerating: 1. Press the CANCEL button or lightly tap the brake pedal to temporarily deactivate cruise control. The CRUISE indicator light will turn off. Coast to decelerate or control speed with the accelerator pedal. After exiting the curve, press the RES/ACCEL button to resume the previously set speed. 2. Hold down the SET/COAST button or press it repeatedly (each press reduces speed by 1.6Km/H) until reaching the desired speed. After exiting the curve, hold down the RES/ACCEL button or press it repeatedly (each press increases speed by 1.6Km/H) until reaching the desired speed.

6

3

Share

What are the reasons for the non-illumination of the center console screen in the eighth-generation Accord?

The reasons for the non-illumination of the center console screen in the eighth-generation Accord include abnormal power supply to the display, poor contact of the wiring harness, damage to the display screen, incorrect use of the USB port in the center armrest, faulty power switch circuit, and outdated firmware. Solutions for the non-illumination of the center console screen: Abnormal power supply to the display: The power supply module needs to be replaced. Poor contact of the wiring harness: The wiring harness needs to be replaced. Damage to the display screen: It is necessary to go to a 4S shop for repair. Incorrect use of the USB port in the center armrest: Inserting incompatible cables into the USB port in the center armrest can cause the screen to go black. Removing the USB cable can solve the problem. Faulty power switch circuit: The driver should go to a car 4S shop for repair. Outdated firmware: Failure to upgrade the multimedia system on time can cause the screen to go black. The driver needs to go to a car 4S shop for an upgrade, and upgrading to the latest firmware can resolve the issue.

1

2

Share

How to Check Engine Model Number from Engine Number?

You can find out the engine model number by checking the engine number. The vehicle's nameplate displays specific information about the car, such as the chassis number (vehicle frame number), engine number, vehicle weight, model, and other basic details. The engine number is also marked on the engine block—note that it is not on the cylinder head but on the lower block. Therefore, with the engine number, you can directly look up the engine model. Composition of Engine Model Number: Prefix: Includes product series code, generation symbol, and regional/enterprise code. Manufacturers may choose appropriate letters as needed, but these must be approved and filed by the industry standardization authority. Middle Section: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Suffix: Distinguishing symbol. For differentiating products within the same series due to improvements or other reasons, manufacturers may select appropriate symbols. The suffix can be separated from the middle section using a "-". The engine model number is an identification code assigned by the engine manufacturer in accordance with regulations, industry practices, or the engine's attributes to a batch of identical products. It represents information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch—including fuel type, number of cylinders, displacement, and brake power.

5

0

Share

How to Downshift for Overtaking Without Jerking?

Reduce speed before downshifting. If you downshift without reducing speed first, jerking is inevitable. Jerking occurs when the gear ratio and throttle are mismatched. Properly reduce your speed, depress the clutch, and as you release the clutch, simultaneously apply the throttle. This ensures quick acceleration without jerking. With good coordination between the throttle and clutch, and by releasing the clutch slowly, you can avoid jerking altogether. Below are specific methods for downshifting to overtake without jerking: 1. The moment you upshift, the engine speed drops immediately while the vehicle speed remains constant. Additionally, as the transmission gear ratio decreases, the torque output from the engine to the wheels also decreases. After completing the upshift, you accelerate by pressing the throttle, but due to the reduced torque output, the acceleration is relatively slow. Conversely, the moment you downshift, the engine speed increases immediately while the vehicle speed remains constant. At the same time, as the transmission gear ratio increases, the torque output from the engine to the wheels also increases. 2. After completing the downshift, you typically reduce speed by easing off the throttle (so-called deceleration downshifting). Due to the increased torque output, pressing the throttle at this point generates significant acceleration, allowing the vehicle to speed up quickly. This meets the requirements for overtaking, as overtaking demands instant high acceleration. The acceleration produced by upshifting and pressing the throttle is far less than that produced by downshifting and pressing the throttle. Although the latter may cause the engine speed to exceed the normal range temporarily, it quickly returns to normal after overtaking.

11

5

Share

What Does Vehicle File Transfer Mean?

Vehicle file transfer refers to the process of extracting the vehicle's registration file from location A and bringing it to location B for re-registration, commonly used in used car transactions. When purchasing a used vehicle with out-of-town license plates and intending to register it locally, a file transfer and ownership change procedure is required. The "file transfer" specifically refers to the vehicle's registration documents. While ownership transfer merely changes the vehicle's owner, file transfer involves physically moving the registration documents from one jurisdiction to another. Before proceeding with file transfer and re-registration, certain conditions must be met: the original vehicle file from the DMV, purchase tax records, and vehicle tax payment receipts are required. The file must first be submitted to the local DMV for review, and the re-registration process can begin only after approval. Important considerations for file transfer: Vehicle identification number rubbing, vehicle license, registration certificate, original purchase invoice or transfer ticket, valuation document, original IDs or temporary IDs of both parties, transfer contract (for organizational owners: attach copy of authorized person's ID) and copies (1 copy each of registration certificate, invoice, and original owner's ID; 2 copies of vehicle license; 3 copies of buyer's ID), authorization letters from both parties, and the "Motor Vehicle Transfer Registration Form".

18

3

Share

What is the meaning of the MG logo?

What is the difference between the car's internal circulation and external circulation?

How to Use Cruise Control on Baojun 510?

What are the reasons for the non-illumination of the center console screen in the eighth-generation Accord?

How to Check Engine Model Number from Engine Number?

How to Downshift for Overtaking Without Jerking?

What Does Vehicle File Transfer Mean?

What does the Buick Excelle 18T represent?

What Causes the Automatic Transmission Gear Lever to Get Stuck in P Position?

How to Use BMW's Cruise Control?

What is the tire model for Toyota Camry?