···
Log in / Register

What is the Mazda3 Axela Bright Selection Package?

1 Answers
Carolyn
07/28/2025, 10:10 PM

The Mazda3 Axela Bright Selection Package includes the vehicle's Blind Spot Monitoring System, Rear Cross Traffic Alert, and LED daytime running lights. Additional information about the Mazda3 Axela is as follows: 1. Exterior: The Mazda3 Axela's front-end design is highly recognizable, featuring a bold black grille that looks quite imposing, with well-proportioned headlights on both sides, making it a 'looker.' In terms of dimensions, the car measures 4662/1797/1445mm with a wheelbase of 2726mm, and both front and rear tires are sized at 205/60R16. The side profile of the car exudes a sporty vibe, and despite being positioned as a family car, it still looks very stylish. 2. Interior: The interior has a sporty design, with a well-thought-out dashboard layout. The use of numerous straight lines gives the cabin a unique aesthetic. The three-spoke steering wheel is relatively simple in design, with an average grip, but the single-sided multifunction buttons are quite convenient for the driver. Additionally, the car features a three-dial instrument cluster with decent display quality. 3. Features: The Mazda3 Axela comes equipped with front/rear side airbags, rear parking sensors, knee airbags, and other safety features. It also includes amenities such as a power sunroof, keyless start system, and auto hold for added comfort. 4. Powertrain: The Mazda3 Axela is powered by a 1.5L L4 engine, delivering a maximum power of 117 horsepower and a peak torque of 148 Nm, paired with a 6-speed automatic transmission. The chassis features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension, with a front-wheel-drive layout.

Was this review help?
17
2
Share
More Forum Discussions

What are the tips for parking an automatic transmission car on a slope?

Tips for parking an automatic transmission car on a slope are: 1. Start with throttle: Novice drivers must apply throttle when starting on a slope. During daily practice, stalling may occur because the resistance is greater when starting on a slope, and the idle speed is insufficient for the vehicle to start smoothly. If the car stalls when starting on a slope, for manual transmission cars, first apply the brake, then press the clutch, stop the car completely, and restart. 2. Control the clutch: Pay attention to clutch control when starting on a slope. Do not release the clutch too high. If the clutch is released too high without releasing the handbrake, the car may stall. The driver needs to control the clutch based on the engine speed and the shaking of the car hood to maintain the semi-engaged state of the vehicle. Lightly pressing the accelerator can successfully start the car. 3. Coordinate throttle and clutch: The coordination of throttle and clutch refers to the sequence of operations when starting on a slope—first throttle, then clutch, and when braking, first brake, then clutch. When starting on a slope, when the brake is applied to a certain extent, the car body will shake, indicating that the engine can no longer drive the gears to work. At this point, the clutch should be pressed to cut off the engine's power transmission, effectively preventing stalling when starting on a slope.
6
0
Share

How much longer can National IV vehicles be driven?

According to the traffic restriction timeline, National IV standard vehicles can continue to be driven for at least eight more years. Below is more information about National IV vehicles: 1. Introduction: The National IV emission standard refers to China's fourth-stage motor vehicle pollutant emission standard. 2. Purpose: Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, it aims to control and reduce vehicle emissions below specified thresholds. 3. Standards: HC emissions must be below 0.1g/km, CO emissions below 1.0g/km, NOx emissions below 0.08g/km, with no PM requirement.
1
0
Share

Precautions for Driving a Private Car to Shanghai

Private cars traveling to Shanghai need to pay attention to restricted time periods, road sections, and fees. Below is an introduction regarding driving a private car to Shanghai: 1. Restrictions on private cars in Shanghai: There are many out-of-town license plate vehicles in Shanghai. There are no special restrictions. The main restriction is the prohibition of driving during weekday morning and evening rush hours. 2. Precautions: (1) Time: Weekdays 7:30-9:30 AM and 4:30-6:30 PM. (2) Road sections: Middle Ring Road, Inner Ring Road, Yan'an Elevated Road, North-South Elevated Road. (3) Fees: Out-of-town license plates entering Shanghai need to pay a 15 yuan fee, which is valid for one week within Shanghai. Re-entering or exiting Shanghai within the same week requires an additional 15 yuan fee.
19
3
Share

Can Halogen Lights Be Directly Replaced with LED Lights?

From the perspective of car headlight installation, it is possible to directly replace halogen bulbs with LED bulbs. During the replacement process, it is necessary to confirm whether the vehicle is equipped with a lens. If the original car does not have a lens, simply replacing it with an LED bulb generally will not pass the vehicle's annual inspection. Below is an introduction to the differences between halogen and LED lights: 1. Light emission principle: Halogen lights use tungsten filaments to emit light, while LEDs use light-emitting diodes. 2. Color difference: Halogen headlights have a yellowish tint, while LED headlights tend to be bluish. 3. Brightness difference: Halogen lights have lower brightness, with 55W producing around 1000 lumens, whereas a 20W LED headlight can achieve 3000-4000 lumens.
18
4
Share

What is the 0-100km/h acceleration time for the A6?

The Audi A6 comes with two engine options: 3.0T and 2.0T. The 3.0T model accelerates from 0 to 100km/h in 5.6 seconds, while the 2.0T model takes between 7.5 to 8.3 seconds. The Audi A6 is a mid-size sedan under FAW-Volkswagen Audi, with body dimensions of 5038 1886 1475mm, a wheelbase of 3024mm, a fuel tank capacity of 73L, a trunk capacity of 430L, and a curb weight ranging from 1800 to 1980kg. The 2022 Audi A6 models are all equipped with a 7-speed wet dual-clutch transmission (DCT), paired with either a 2.0T or 3.0T turbocharged engine. These engines deliver a maximum torque of 500 Nm and a maximum power of 250kW. The recommended fuel grade is 95 octane, and the tire specifications include 255/40R20, 225/55R18, and 245/45R19. Factors affecting the 0-100km/h acceleration time of a vehicle are as follows: Torque: Torque, in simple terms, represents the strength of the engine. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. For example, the Audi R8 has a maximum torque of 570 Nm and accelerates from 0 to 100km/h in 3.1 seconds, while the BMW 6 Series GT has a maximum torque of 400 Nm and takes 6.5 seconds. Transmission efficiency: The transmission acts as a medium for power transfer, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the Audi R8 has a power-to-weight ratio of 373Hp/T, while the BMW 5 Series has a ratio of 108Hp/T.
10
3
Share

Does BMW Antifreeze Need to Be Diluted with Water?

BMW antifreeze needs to be diluted with water. Here are the precautions for using automotive antifreeze: 1. Use the same brand of antifreeze: Different brands of antifreeze may have varying production formulas. Mixing them may cause chemical reactions between additives, leading to their ineffectiveness. 2. Regular replacement is necessary: Replace the antifreeze every two years or every 40,000 kilometers driven. Taxis should replace it more frequently. When replacing, drain the old fluid completely, clean the cooling system thoroughly, and then add the new fluid. 3. Avoid diluting with water: Traditional inorganic antifreeze should not be diluted with water, as it may form precipitates, severely affecting its normal function. Organic antifreeze can be diluted with water, but excessive dilution should be avoided.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.