What is the Maybach car logo?

1 Answers
TuckerLee
07/30/25 6:07am
Maybach car logo is two crossed M letters. Here is relevant information about car logos: 1. Function of car logos: The function of car logos is to facilitate identification of vehicle "identity" by sellers, users, maintenance personnel and traffic management departments. According to Chinese national regulations, these logos must be inspected during new vehicle registration and annual inspections. 2. Related classifications: Initial letter logos, brand English logos, symbolic object logos - Maserati's trident, Lamborghini's bull, Buick's three shields, Ferrari's horse, abstract graphic logos, Audi's four rings, Mitsubishi's three diamonds, Renault's diamond, Toyota's three interlocking rings.
Was this review help?
8
5
Share
More Forum Discussions

What causes the Changan CS75's exhaust valve to fail and burn engine oil?

There are several reasons why the Changan CS75's exhaust valve may fail and cause engine oil burning: 1. Improper maintenance: When the exhaust valve is damaged, it cannot control the amount of exhaust gas recirculation. Excessive exhaust gas participating in recirculation will affect the ignition and performance of the air-fuel mixture, thereby impacting the engine's power, especially during idle, low speed, small load, and cold start conditions. The recirculated exhaust gas will significantly affect engine performance. 2. Fuel quality issues: Sudden exhaust valve failure after using low-quality gasoline or fuel additives can lead to engine oil burning and severe blue smoke from the exhaust. The reason is that the exhaust valve also functions as an oil-gas separator. Under normal operation, it only draws in exhaust gases and not oil. When the exhaust valve is damaged and loses its oil-gas separation function, it will draw in oil along with the exhaust gases, allowing oil to enter the intake manifold and combustion chamber, resulting in oil burning and severe blue smoke from the exhaust.
17
1
Share

Where is the water pump fuse located on a BMW X6?

The water pump fuse on a BMW X6 is located on the side of the left instrument panel. Introduction to the water pump: The water pump is the driving force for the coolant flow within the cooling system, circulating the coolant. The radiator is used to cool the water, which in turn cools the engine. Both the radiator and the intercooler are installed at the front of the engine in the vehicle's nose. Vehicles equipped with an intercooler also come with a turbocharger, primarily to reduce the intake air temperature of the engine, thereby increasing the engine's output power. Introduction to the fuse: An automotive fuse is a type of current fuse. When the circuit current exceeds twice the rated current of the fuse, it will melt within seconds, serving to protect the circuit.
2
4
Share

How Often Should Brake Fluid Be Changed in a BMW 3 Series?

BMW 3 Series requires brake fluid change every 40,000 kilometers. Introduction to Brake Fluid: Automotive brake fluid is the liquid used in hydraulic braking systems. It effectively lubricates the moving parts of the braking system, extending the service life of brake wheel cylinders and rubber cups. It is non-corrosive to both metallic and non-metallic materials in the braking system. It adapts to various environments, ensuring flexible transmission of braking force under conditions such as high temperatures, extreme cold, high speeds, and humidity. It also serves to transmit energy and dissipate heat. Precautions for Changing Brake Fluid: Do not allow impurities to mix into the brake fluid. During the use of brake fluid, avoid mixing gasoline, diesel, engine oil, or windshield washer fluid into the brake fluid, as this can significantly impair braking performance.
2
0
Share

What is the model of the new Alto manual transmission?

The model of the new Alto manual transmission is a 5-speed transmission. Introduction to manual transmission: A manual transmission is a gear-shifting device used to alter the speed and torque transmitted from the engine to the drive wheels. It enables the vehicle to achieve different traction forces and speeds under various conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also allowing the engine to operate within a more favorable range. Maintenance of manual transmission: If mineral gear oil is used in the transmission, the transmission fluid should be replaced every 3 years or 60,000 kilometers. If synthetic oil is used, the transmission fluid should be checked regularly. For cleaning the transmission, it is recommended to visit a professional repair shop that uses specialized transmission cleaning equipment to ensure effective fluid replacement during the transmission's operation.
3
0
Share

How long is the Highlander?

The Highlander has a body length of 4890mm, a width of 1925mm, and a height of 1720mm and 1715mm, with a wheelbase of 2790mm. Compared to the previous model, the length has increased by 35mm, and the front grille design has become more aggressive. Below is additional information about the Highlander: 1. Basic Information: It has a fuel tank capacity of 72.5 liters and a curb weight of 1910 kg. It is a 5-door, 5-seat SUV under GAC Toyota. 2. Engine: The Highlander is equipped with a 2.0T turbocharged engine, delivering a maximum power of 162 kW at 5200 to 5600 rpm and a maximum torque of 350 N·m. It is paired with a 6-speed automatic transmission. The drivetrain is front-wheel drive, with a front suspension using a MacPherson strut independent suspension and a rear suspension featuring an E-type multi-link independent suspension.
10
5
Share

What is the average lifespan of a Subaru engine?

Subaru engines have an average lifespan of 300,000 kilometers. Factors affecting engine lifespan: Engine load directly affects the strength and lifespan of its components. When load increases, the working load of each assembly also increases, leading to greater wear. For vehicles in their initial running-in period, the wear will be even more significant. The choice of fuel and lubricating oil is crucial. The fuel used must meet the grade specified by the vehicle. Using lower-grade fuel is prohibited, as it can cause engine knocking, subjecting components to strong impacts and additional loads, thereby accelerating wear. The high temperature, high pressure, and shock waves generated by knocking can also destroy the lubricating oil film on the cylinder walls, worsening component lubrication. Methods to increase engine lifespan: Use high-quality lubricating oil that meets the manufacturer's recommended standards, and replace the oil regularly as required, ensuring the quantity meets the standard. Replace the three filters (air, oil, and fuel) periodically according to the manufacturer's maintenance requirements. In areas with harsh working conditions, the maintenance interval should be appropriately shortened.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.