···
Log in / Register

What is the maximum wading depth of the XPeng P7?

4 Answers
SanHector
08/28/25 7:49am

According to official information, the maximum wading depth of the XPeng P7 is 30 cm. Common tire specifications include 245/45R19 and 245/50R18, with a body length of 4880 mm, a vehicle weight ranging from 1890 to 2060 kg, and a 4-door, 5-seat sedan configuration. The maximum wading depth refers to the deepest water a vehicle can safely pass through. Generally, the maximum wading depth for sedans does not exceed 30 cm, while SUVs can handle slightly deeper water, though it is advisable not to exceed 50 cm. Among common vehicle models, the GAC Trumpchi GS8 has a maximum wading depth of 30 cm, the Audi A4 32 cm, the Volkswagen Sagitar 30 cm, the Land Rover Range Rover 90 cm, the Jeep Compass 48 cm, and the Highlander 45 cm. SUVs clearly surpass sedans in maximum wading depth. Generally, when driving through water, vehicle owners should take different measures depending on the water depth and the vehicle's characteristics, as detailed below: If the water depth reaches the height of the exhaust pipe, it is relatively safe. Even if water enters the exhaust pipe, the pressure inside is sufficient to expel the water. As long as the engine is not turned off in the water, there will be no backflow into the vehicle. If the water depth reaches the height of the door frame, it becomes more hazardous. The vehicle's circuits, electronic components, and sensors are mostly located at the bottom, increasing the risk of short circuits and damage to critical electrical parts, potentially preventing the vehicle from starting. If the water depth reaches the height of the air intake pipe, it is extremely dangerous. Driving directly into such conditions can cause the engine to stall immediately, leading to permanent damage or rendering the engine unusable.

Was this review help?
18
4
Share
VonElla
09/10/25 6:01am

The maximum wading depth of the XPeng P7 is approximately 300mm, or about 30 centimeters. Last year, I drove it back to my hometown during the rainy season, encountering a stretch of water about 28 centimeters deep. I drove through steadily without any issues. However, it's important to remind everyone that the battery of an electric vehicle is located beneath the chassis, so extra caution is needed when wading through water. Keep the speed below 10 kilometers per hour to avoid damage from water waves. If the water depth exceeds the limit, the battery may short-circuit, and the repair costs can be quite expensive. Personally, I often check the sealing components under the car after rain to ensure good waterproofing. When driving through urban waterlogged roads, I prefer to measure the water depth with a stick before deciding whether to proceed. If you must travel during heavy rain, it's best to avoid low-lying areas—safe driving is paramount. Remember to rinse the chassis promptly after wading to prevent corrosion; developing good habits can extend your car's lifespan.

Was this review help?
3
0
Share
Expand All
SanPreston
10/24/25 6:53am

The official wading depth for the XPeng P7 is 300mm, designed to handle common urban road flooding. As someone who frequently studies electric vehicles, I find this depth reasonable, given the high IP67 sealing level of the battery pack, which ensures short-term waterproofing. When wading, maintain a slow, steady speed—avoid accelerating or braking suddenly to prevent water from rushing in and damaging the motor. If the depth exceeds the limit, the system may automatically cut power for protection, but don’t rely on it. I recommend observing other vehicles’ tracks before wading and avoiding murky water where the bottom isn’t visible. After wading, check wheel sensors to prevent mud or debris blockage. While EVs aren’t as prone to engine flooding as gas cars, battery maintenance is more critical—avoid prolonged submersion to prevent electrolysis issues.

Was this review help?
2
5
Share
Expand All
DeJoseph
12/07/25 7:16am

The Xpeng P7 has a maximum wading depth of 300mm, so take it easy when crossing puddles. When encountering accumulated water while driving, I usually test the depth with my foot first—if it exceeds waist height, don’t proceed. Turn on your headlights in the rain to see the road clearly, maintain a low speed, and avoid rushing, as strong currents can easily cause the car to drift. After wading through water, wash the car promptly and clean the undercarriage to prevent mud buildup and corrosion. Electric vehicles are relatively safer in water, but be cautious with battery protection—don’t force your way through. Before traveling during the rainy season, check the weather forecast and avoid waterlogged areas. Developing this habit saves both hassle and money.

Was this review help?
13
1
Share
Expand All
More Forum Discussions

Which country is the WEY VV6 from?

WEY VV6 is a Chinese car. Taking the 2021 WEY VV6 as an example, its body structure is a 5-door, 5-seat compact SUV. The body dimensions are: length 4625mm, width 1860mm, height 1720mm, with a wheelbase of 2680mm and a trunk capacity ranging from 512 to 1400 liters. The 2021 WEY VV6 features a front MacPherson independent suspension and a rear double-wishbone independent suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 227 PS, a maximum power of 167 kW, and a maximum torque of 387 Nm, paired with a 7-speed dual-clutch transmission.
3
3
Share

What sensors are there in a car?

There are various sensors in a car, including knock sensor, water temperature sensor, intake air temperature sensor, air flow sensor, wheel speed sensor, oxygen sensor, camshaft position sensor, crankshaft position sensor, throttle position sensor, coolant temperature sensor, ABS sensor, etc. Taking the ABS sensor as an example, it is applied in the anti-lock braking system of motor vehicles. The ABS sensor uses an inductive sensor to monitor vehicle speed. By interacting with a toothed ring that rotates synchronously with the wheel, the ABS sensor outputs a set of quasi-sinusoidal AC signals whose frequency and amplitude are related to the wheel speed. This output signal is transmitted to the ABS electronic control unit to achieve real-time monitoring of wheel speed.
15
4
Share

Where are the drainage holes for the 8th-generation Camry doors?

8th-generation Camry door drainage holes are located at the bottom of the doors. You can see them by lifting the door bottom sealing strip. The 8th-generation Camry features a 4-door, 5-seater sedan body structure with dimensions of 4885mm in length, 1840mm in width, and 1455mm in height, a wheelbase of 2825mm, a fuel tank capacity of 49 liters, a trunk capacity of 620 liters, and a curb weight of 1665kg. The front suspension is a MacPherson strut independent suspension, while the rear suspension is an E-type multi-link independent suspension. It is equipped with a 2.5L naturally aspirated engine producing a maximum horsepower of 178 PS, maximum power of 131 kW, and maximum torque of 221 Nm.
16
2
Share

What is the standard tire model for Toyota Corolla?

Toyota Corolla's standard tire model is 19560r15. 19560r15 indicates that the tire width is 195mm, the aspect ratio is 60, 'r' stands for radial tire, and 15 means the tire can be mounted on a 15-inch wheel rim. Taking the 2013 Toyota Corolla as an example, its body structure is a 4-door, 5-seater sedan, with front suspension being MacPherson independent suspension and rear suspension being torsion beam suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 120ps, maximum power of 88kw, and maximum torque of 152nm, paired with a 5-speed manual transmission.
6
3
Share

How to Reset the Maintenance Light on the Elantra?

The method to reset the maintenance light on the Elantra is: 1. With the car turned off, press and hold the trip meter reset button; 2. Turn the ignition switch to the 'on' position, then press the reset button for more than 5 seconds to activate the reset mode; 3. Press the reset button for more than 1 second to complete the reset. Taking the 2016 Elantra as an example, its body structure is a 4-door, 5-seater sedan with dimensions of 4570mm in length, 1775mm in width, and 1445mm in height, a wheelbase of 2700mm, a minimum ground clearance of 150mm, a fuel tank capacity of 50 liters, a trunk capacity of 473 liters, and a curb weight of 1233kg.
14
0
Share

What Does a Driver's License Medical Examination Include?

Driver's license medical examination includes: 1. Height: There is no height restriction for ordinary cars. However, for applying for large buses, tractors, city buses, large trucks, or trolleybuses, the height must be above 155 cm; for medium-sized buses, the height must be above 150 cm. 2. Vision: Ordinary cars require naked or corrected vision in both eyes to reach 4.9 or above on the logarithmic visual acuity chart. For large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams, the naked or corrected vision in both eyes must reach 5.0 or above on the logarithmic visual acuity chart. 3. Color vision: Individuals with red-green color blindness are not allowed to take the driver's license test.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.