···
Log in / Register

What is the maximum wading depth of the Leopard Black Diamond?

4 Answers
VonVictoria
07/23/25 10:22pm
The height from the ground to the exhaust pipe of the car is 47 centimeters. Subtracting the water surge during driving, the maximum wading depth is 40 centimeters. Additional information is as follows: 1. Car transmission: It is divided into manual and automatic. The manual transmission mainly consists of gears and shafts, achieving speed and torque changes through different gear combinations. 2. The automatic transmission (AT) is composed of a hydraulic torque converter, planetary gears, and a hydraulic control system, achieving speed and torque changes through hydraulic transmission and gear combinations. 3. Engine: It is a machine that can convert other forms of energy into another form of energy, usually converting chemical energy into mechanical energy. 4. Chassis: It refers to the combination of the transmission system, running system, steering system, and braking system in a car.
Was this review help?
8
4
Share
DiAlana
08/10/25 6:07pm
I remember the maximum wading depth of the Leopaard Black King Kong is around 70cm. When driving this vehicle off-road, I've tried it a few times - it remains quite stable when the water level doesn't exceed half of the wheel height. Don't wade too fast, otherwise water may splash into the engine or intake tract, which could easily cause stalling issues. It's best to engage low gear and maintain steady speed when crossing, avoiding sudden throttle inputs. After wading, promptly clean mud and accumulated water from under the vehicle to prevent corrosion of chassis components. For long-term maintenance, check the intake pipe sealing to prevent rust or electrical short circuits. For frequent wading users, installing a snorkel is recommended for enhanced protection, otherwise you might encounter troubles during heavy rain or in flood-prone areas. Overall, this depth is quite suitable for light off-roading, but don't take risks with deeper water pits.
Was this review help?
11
1
Share
Expand All
KingAnn
09/23/25 6:18am
The Leopard Black King Kong typically has a wading depth of around 700mm. I find it performs quite well driving through urban stormwater roads. Remember to turn off the auto start-stop function when wading to avoid difficulties restarting if the engine stalls in water—this is particularly important for beginners. Maintain a slow and steady speed while driving, avoid sudden braking to prevent water waves from entering the exhaust pipe. After wading, it's best to visit a car wash for a thorough undercarriage cleaning to remove mud and water stains, which helps extend the vehicle's lifespan. For regular maintenance, check tire tread wear as worn treads can lead to slipping in water. Installing off-road accessories like lift kits can enhance wading capability, but avoid tampering with the original factory design. The wading depth is a reference value; if you encounter deeper water, it's safer to find an alternative route.
Was this review help?
14
2
Share
Expand All
JamesonLee
11/06/25 8:33am
The maximum wading depth of the Leopard Black King Kong is approximately 70 cm. Wading carries risks; do not exceed this height, as water entering the intake pipe may damage the engine. Drive cautiously, moving slowly in low gear when passing through waterlogged areas, and avoid creating large waves. After wading, promptly stop to inspect the underside of the vehicle to prevent silt blockage or corrosion. Regular maintenance includes checking the intake pipe seal to ensure reliable performance during wading. Safety always comes first.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What brand is the BMW X1 transmission?

BMW X1's transmission is from Aisin. Aisin Transmission: Aisin Transmission is a Japanese brand, produced domestically in China; with French engines. It is manufactured in Xiangyang, Hubei, China. According to incomplete statistics, foreign brands using Aisin transmissions include: Porsche, Hummer, Lexus, Volvo, Jeep, Mitsubishi, Mazda, Hyundai, Kia, Suzuki, Fiat, Alfa Romeo, Isuzu, Hino, Daihatsu, and others. Japanese Aisin Company: Japanese Aisin is the world's largest automatic transmission manufacturer and the fifth-largest automotive parts company globally. It was established as a joint venture between Aisin and BorgWarner in 1996 and is a subsidiary of Aisin Seiki, which in turn holds 22.2% of Toyota Group's shares. Therefore, many people say that Aisin and Toyota are the same, which is correct. As a result, almost all Toyota models use Aisin automatic transmissions.
2
1
Share

Is the Peugeot 5008 fuel-consuming?

The Peugeot 5008 is fuel-consuming. According to user feedback on actual fuel consumption, the Peugeot 5008 1.6T model has an average combined fuel consumption of 9.7L/100km, while the 1.8T model averages 9.4L/100km. Driving Habits: Personal driving skills significantly impact a car's fuel consumption. For short trips of just a few kilometers, due to the mechanical design characteristics of the vehicle, it takes some time of operation to reach optimal efficiency. If the car is only driven for a few kilometers each time without fully warming up, high fuel consumption is inevitable. Road Conditions: Road condition factors include whether the road is smooth, the level of friction, the steepness of slopes, and whether there is traffic congestion. Generally, routes with many sharp turns and frequent use of brakes will result in much higher fuel consumption. During peak commuting hours in the morning and evening, it's common to encounter situations where you can only travel a few kilometers in an hour. Under such severe traffic congestion, fuel consumption can be more than three times higher than during smooth traffic conditions.
13
4
Share

Where is the windshield washer motor fuse located in the Jetta VS5?

The windshield washer fuse of the Jetta is located in the fuse box inside the engine compartment, next to the engine and in front of the steering wheel. You can see the fuse box by opening the hood. Fuse sizes: Small automotive fuse box; Medium automotive fuse box; Large automotive fuse box. Common injection molding materials include: plastic, nylon, bakelite, and PBT engineering plastic. Each material has different high-temperature resistance levels. Fuse color standards: International standards for automotive blade fuse colors: 2A gray, 3A purple, 4A pink, 5A orange, 7.5A brown, 10A red, 15A blue, 20A yellow, 25A transparent, 30A green, and 40A dark orange. Different colors clearly indicate different ampere ratings.
12
3
Share

How many seconds does the 2.0L Teana take to accelerate from 0 to 100 km/h?

Teana 2.0L model accelerates from 0 to 100 km/h in 5.9 seconds. Teana is a mid-size car under Dongfeng Nissan, with body dimensions of 4901*1850*1450mm, a wheelbase of 2825mm, a fuel tank capacity of 61.3L, a trunk capacity of 586L, and a curb weight of 1456-1511kg. The 2021 Teana 2.0L model is equipped with a CVT continuously variable transmission and a 2.0L naturally aspirated engine, with a maximum torque of 197 Nm and a maximum power of 115kW. It uses 95-octane gasoline and has tire specifications of 205/65R16. Factors affecting the vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque generally indicates how much force is available. The greater the torque, the more force is available to push the vehicle, resulting in faster acceleration. For example, the Audi R8 has a maximum torque of 570 Nm and accelerates from 0 to 100 km/h in 3.1 seconds, while the BMW 6 Series GT has a maximum torque of 400 Nm and takes 6.5 seconds. Transmission efficiency: The transmission is the medium for transferring power and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. For example, the Audi R8 has a power-to-weight ratio of 373 Hp/T, while the BMW 5 Series has a ratio of 108 Hp/T.
12
2
Share

Where is the engine of the JAC X8 produced?

The JAC X8 is equipped with a second-generation 1.5TGDI direct-injection engine independently developed by Anhui Jianghuai Automobile Group Co., Ltd., with a maximum power of 135KW and a maximum torque of 300Nm. Engine Introduction: An engine (Engine) is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. Engine Function: The automobile engine is the device that provides power for the car, serving as the heart of the vehicle, determining its power, fuel efficiency, stability, and environmental performance. Engine Classification: Depending on the power source, automobile engines can be divided into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems, among others.
16
2
Share

What are the two types of original engine oil for Chery?

Chery 4S stores offer two types of SM-grade semi-synthetic engine oil. One comes in a yellow-shell packaging, which is supplied by Great Wall Company. The other is packaged as Mobil Super, provided by Mobil for Chery. Extending Usage Time: If you want to extend the mileage of usage, it is recommended to check the oil once a month or before driving. Take some oil from the dipstick to check the oil level and quality. If it feels okay, continue using it; if the quality is poor, replace it immediately to minimize damage to the car. Identifying Oil Quality: Smell Test: Bring the dipstick close to your nose and smell it. If there is a strong sour odor, it means the oil has deteriorated and should be replaced. Finger Rub Test: Rub the old oil between your thumb and forefinger repeatedly. Good-quality oil will feel smooth, have fewer particles, and no friction. If you feel impurities, poor viscosity, or even a gritty sensation, it should be replaced.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.