What is the maximum temperature of a new energy vehicle motor?

Where is the OBD interface of Haima M3?

The OBD interface of Haima M3 is located behind the storage box on the driver's side. Here are detailed introductions about the OBD interface of Haima M3: 1. The OBD function is the same for all vehicles. It is a mandatory configuration installed by the state to prevent vehicle exhaust from exceeding standards and polluting the environment, and it is not very useful for car owners. 2. OBD is the abbreviation of On-Board Diagnostics, which is translated into Chinese as "On-Board Automatic Diagnostic System". This system will monitor whether the vehicle's exhaust exceeds the standard at any time based on the engine's operating conditions, and will issue a warning immediately if it exceeds the standard.

19

1

Share

Is 'ON' for On or Off?

ON means the power is turned on, indicating the active state, while OFF means the power is turned off. Below are specific introductions to common car buttons: 1. MUTE button: MUTE can mute the sound with one press. 2. SEL key menu selection confirmation button: The SEL key is generally located on the multifunction steering wheel. The OK key has the same function as the SEL key, but some cars use SEL while others use OK. 3. VOL+/- are volume adjustment buttons: VOL is the abbreviation of the word 'volume', which can adjust the volume of the car audio.

7

4

Share

What does the Geely Binyue lim mean?

Geely Binyue lim button means to turn on the speed limit function, that is to say, after turning on this function, the maximum speed can only reach the set speed, and even if you step on the accelerator again, the speed will not increase. How to start lim: When the vehicle is stationary, press the lim button once, and the default speed limit is 30Km/h. The specific meaning of lim: Generally, when the vehicle is stationary, pressing this button will default to a speed limit of 30km/h; when driving, pressing this button will set the current speed value as the speed limit trigger point. Press to turn on, press again to turn off.

6

0

Share

How Many Kilometers Should You Drive for the First Maintenance?

New car first maintenance is required at 3 months or 5,000 kilometers, whichever comes first. Before the first maintenance, pay attention to the following points: 1. Book in advance: It is best to make an appointment with the 4S store in advance; otherwise, you may encounter situations where there are no available service bays or have to wait in line for a long time. 2. Bring necessary documents: When going for the first maintenance, bring essential items such as the maintenance manual and vehicle registration. If unsure about what to bring, make sure to ask during the appointment. 3. Record issues promptly: If you encounter any faults or questions while driving, note them down and inform the staff during the first maintenance registration so that the technician can check all issues during the maintenance.

12

3

Share

What transmission does the Geely Vision use?

Geely Vision is equipped with either a manual or an automatic transmission depending on the model configuration. Below are the detailed specifications of the transmissions: 1. The 4-speed automatic transmission in the 2016 model is independently developed by Geely, demonstrating excellent durability and smooth performance in tests. This transmission has also been purchased by other domestic automakers, positioning Geely as a leader in this field. 2. The number of gears in an automatic transmission is not the sole determinant of its quality; the shift logic is equally important. Shift logic refers to the timing of gear changes set by the transmission manufacturer, which is influenced by factors such as engine speed, throttle position, and vehicle speed. A well-designed automatic transmission with responsive shifting and rational logic can achieve superior fuel efficiency.

1

2

Share

How to Replace the Power Steering Pump on a Corolla?

Replacing the power steering pump on a Corolla involves the following steps: 1. Use a tool to remove the spring clip at the bottom. There is a small hole on the housing—insert the tool into the hole and push firmly. 2. After removing the spring clip, tap off the rear cover and remove the small retaining ring on the shaft. 3. Once the retaining ring is removed, the pump shaft and pulley can be pulled out together. 4. Next, remove the oil outlet screw in sequence, and the internal pressure valve assembly can also be taken out. 5. Installation follows the reverse order of removal. The power steering system primarily assists the driver in adjusting the vehicle's direction, reducing the effort required to turn the steering wheel. Of course, power steering also plays a role in the safety and fuel efficiency of the vehicle.

10

3

Share

What is the maximum temperature of a new energy vehicle motor?

Where is the OBD interface of Haima M3?

Is 'ON' for On or Off?

What does the Geely Binyue lim mean?

How Many Kilometers Should You Drive for the First Maintenance?

What transmission does the Geely Vision use?

How to Replace the Power Steering Pump on a Corolla?

What is the fuel tank capacity of the 2019 Audi A4L in liters?

Where is the New Santana Produced?

Where is the air filter located in the Volkswagen CC?

Where is the active braking system in the Tayron?