What is the maximum speed when passing through a school intersection?

2 Answers
OEdward
07/25/25 3:12pm
The maximum speed when passing through a school intersection is 30 kilometers per hour. All entrances to school zones are marked with a "30" speed limit sign, indicating that the speed limit in school zones should not exceed 30 kilometers per hour. This mandatory standard stipulates that road traffic signs and markings in school zones should be coordinated with other traffic safety and management facilities. Appropriate warning signs for children or pedestrians should be placed before the starting point of a school zone, in front of locations frequently accessed by children, and at intersections directly leading to school gates. A no-horn sign may be installed in school zones, with auxiliary signs indicating the prohibited time and area for honking. A school zone refers to the road within a 150-meter radius upstream and downstream of the gates of kindergartens, primary schools, and secondary schools. The speed limit in school zones should not exceed 30 km/h. The size of speed limit and warning signs in school zones should be appropriately enlarged. Designated mesh lines should be marked at intersections and entrances near school gates where temporary parking is likely to cause congestion. No-parking signs or time-limited parking signs should be placed within a certain range in front of school gates. Warning signs for children or pedestrians should be placed at appropriate locations before speed limit signs. Measures such as speed bumps or narrowing the roadway may be implemented before entering speed-limited sections or zones as needed, along with corresponding warning signs and markings.
Was this review help?
8
3
Share
DiJayla
08/11/25 9:22pm
When driving through a school crossing, I remember clearly that the maximum speed is generally 30 kilometers per hour. The reason is simple: children tend to run around during school hours, and accidents can happen easily if you're not careful. A lower speed gives you more time to react. For example, if a child suddenly dashes out, at 30 km/h, you can stop within a few meters instead of hitting them at higher speeds. Safety first! Personally, I always drive extra carefully near schools and slow down to below 20 when I see the yellow signs. Besides, school zones are monitored with speed limit signs—don’t think you can speed without consequences. One fine could cost you several meals. My advice: drive even slower during school hours; a few extra seconds for safety is worth it.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

What are the core components of new energy vehicles?

New energy vehicles primarily consist of three core components: the battery, electric motor, and battery management system. Below are detailed introductions: Introduction to the Battery Management System: The battery management system is tightly integrated with the power battery. It monitors various battery parameters, controls output, and facilitates communication with other systems. Introduction to Pure Electric Vehicle Batteries: Battery technology is the core competitive advantage of pure electric vehicles. In recent years, China has witnessed explosive growth in the demand for power batteries. Currently, power batteries are mainly categorized into three types: ternary lithium batteries, lithium iron phosphate batteries, and lithium iron manganese phosphate batteries.
12
2
Share

What are the differences between the Sagitar Excellence Edition and Luxury Edition?

The differences between the Sagitar Excellence Edition and Luxury Edition are as follows: 1. Different configurations: (1) Excellence Edition: The interior is equipped with steering wheel length adjustment, steering wheel height adjustment, and welcome sill strips with SAGITAR logo. (2) Luxury Edition: The interior is equipped with a commemorative body badge. 2. Different driving experiences: (1) Excellence Edition: Equipped with ACC 3.0 advanced adaptive cruise system, combined with a comprehensively optimized chassis layout and full-series rear independent suspension design, delivering a smooth and effortless driving experience. (2) Luxury Edition: The entire series is equipped with EA211-1.2TSI and 1.4TSI high-power engines, along with a 58-car driving mode selection function, allowing free choice among standard, economical, sport, and personalized settings for four driving modes, achieving comprehensive mature driving control.
6
4
Share

Can Running a Red Light Be Detected on the Same Day?

Running a red light generally cannot be detected on the same day. After running a red light, it usually takes 3 to 7 days for the violation to be recorded, with the latest being no more than 13 working days. However, some cities now offer "instant electronic police capture notifications," where you can receive an SMS notification within 5-10 minutes of being captured. But this notification does not equate to a confirmed violation; it merely serves as a capture alert. The final determination of whether it is a violation still takes 3-7 days. If it is indeed a violation, you will receive another SMS notification. For traffic violations captured by surveillance cameras, vehicle owners typically do not receive an immediate violation notification via SMS. There is usually a delay, and the duration of this delay can vary. This is because after an electronic camera captures a violation, the relevant violation information needs to be transmitted through a dedicated channel to the traffic police management center. It is then compiled and forwarded to the relevant traffic police department staff for verification. Only after the violation is confirmed will the system automatically retrieve the vehicle owner's phone number based on the license plate information and send the violation details via SMS. After receiving the violation SMS, the vehicle owner must go to the traffic police department where the violation occurred to address it within one month before the vehicle's annual inspection. Generally, if a vehicle owner suspects a violation, they can use 15 days as a benchmark. If no violation SMS is received within 15 days, it is likely that no violation was recorded. Methods for Traffic Violation Queries: Traffic violation queries refer to checking motor vehicle violations of traffic regulations through online platforms or query terminals. Methods for checking traffic violations include website queries, phone queries, SMS queries, and mobile app queries. Website Query: You can search for "vehicle violation query" and enter your vehicle information to check. Phone Query: To inquire about violations, you can call local 114 (area code + 114) or 12580 for confirmation. Violations can only be processed at the traffic police department where the violation occurred or where the vehicle's license plate was issued. For on-the-spot violations, such as those directly caught by a traffic officer, they must be handled at the location of the violation. SMS Query: Open the SMS interface on your phone; enter the license plate number of the violating vehicle in the message content; input 1062650001 as the recipient and click send. Mobile App Query: Open the Traffic Management 12123 app, select "violation query," and find any unprocessed violations to clear them.
17
3
Share

What brand was China's first domestically produced automobile in July 1957?

In July 1957, China's first domestically produced automobile was the Jiefang (Liberation) brand truck. Below are relevant details: 1. Origin of the name: In the second half of 1953, the Stalin Automobile Plant suggested to the Chinese side to name the tonnage truck. After consultation with Chairman Mao Zedong's close associates, Chairman Mao personally decided on the brand name 'Jiefang' (Liberation). 2. Prototype: In July 1956, China's first domestically produced Jiefang CA10 tonnage truck rolled off the production line. At that time, FAW Group received assistance from the Soviet Union in automobile construction and chose the ZIS model tonnage truck from the Stalin Automobile Plant as the prototype for the Jiefang brand truck.
12
3
Share

How to Bleed Air from the Clutch Alone?

Bleeding air from the clutch can be done as follows: Manual Bleeding Method: Repeatedly press and release the clutch pedal with your foot. When you feel resistance while pressing, use a wrench to loosen the bleeder screw on the booster, then tighten it after bleeding. Repeat this process multiple times until all air is expelled. Assisted Bleeding Method: Connect one end of a rubber tube to the air pipe fitting to utilize air pressure for bleeding. Bend the tube into a U-shape with your left hand, and aim the other end at the vent hole on the reservoir cap with your right hand. Slowly release the bent section with your left hand (air pressure should not exceed 3 kPa). At this point, loosen the bleeder screw on the booster. When fluid flows out continuously without bubbles, tighten the bleeder screw and stop the air supply. Then, press the clutch pedal with your foot. If you feel resistance, it indicates that the air in the clutch hydraulic line has been successfully bled.
7
1
Share

Where is the sunroof drain outlet located on a Volvo?

Volvo's sunroof drain outlets are small holes located at the two corners of the sunroof. If the sunroof drain holes become clogged, here are some solutions: 1. First, you can use an air gun: Aim the air gun at the sunroof drain holes and blow air to remove the dirt inside. When doing this, use a towel to catch the dirt to avoid soiling the car. 2. Second, you can use a syringe: Inject water into the drain holes to flush out the dirt and prevent clogging. The sunroof is quite important for a car as it provides ventilation for passengers. Frequent use of the sunroof may cause it to produce unusual noises, so it's essential to clean the dust on the sunroof promptly when using it.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.