What is the maximum speed of the new Baojun Valli?

Where is Dongfeng Honda's production location?

Dongfeng Honda's production location is in Wuhan City, Hubei Province. Relevant information about Dongfeng Honda is as follows: Introduction to Dongfeng Honda: Dongfeng Honda, officially named Dongfeng Honda Automobile Co., Ltd., is a joint venture automobile brand established by Dongfeng Motor Group, Honda R&D Investment Co., Ltd., and Honda Motor Co., Ltd. of Japan. Dongfeng Honda Models: Dongfeng Honda's main models include the sport utility vehicle CR-V (Siwei), mid-size car CIVIC (Civic), high-end sports sedan SPIRIOR (Spirior), self-owned brand model CIIMO (Cimo), high-end MPV Elysion (Ailisen), hybrid vehicle INSIGHT (Insight), and new concept sedan JADE (Jade).

13

4

Share

Why can only 40L be added to a 60L fuel tank?

Because the actual capacity of the fuel tank is greater than the nominal capacity. According to fuel safety regulations, national standards stipulate that the nominal capacity of an automobile fuel tank is 95% of the rated capacity. Therefore, when refueling to full, it can hold 10% more fuel than the nominal capacity. Here is additional information: Refueling precautions: Use automotive gasoline only, as improper fuel entering the fuel system may damage the fuel system and engine; Do not use gasoline containing methanol or alcohol; Avoid spilling fuel on painted surfaces to prevent damage. Purpose: The fuel tank capacity determines the driving range. For two cars with identical engines, the larger the fuel tank, the farther it can travel.

1

0

Share

What are the differences between the Mercedes-Benz G500 and the Mercedes-Benz G63?

Mercedes-Benz G500 and G63 mainly differ in terms of tires, power, and body dimensions. The specific analysis is as follows: Different tires: The tire model of the Mercedes-Benz G500 is 275/55r19; the tire model of the G63 is 275/50r20. Different power: The maximum horsepower of the Mercedes-Benz G500 is 421 hp, the maximum power is 310 kW, and the maximum torque is 610 Nm; the maximum horsepower of the G63 is 585 hp, the maximum power is 430 kW, and the maximum torque is 850 Nm. Different body dimensions: The length, width, and height of the Mercedes-Benz G500 are 4857mm, 1931mm, and 1962mm respectively; the length, width, and height of the G63 are 4864mm, 1984mm, and 1974mm respectively.

4

Share

How long does it take to get an A2 driver's license?

It depends on individual driving learning ability, the fastest is about 3 months. Here is extended information: Tractor license: The A2 license corresponds to the tractor license, so to apply you need to first hold a medium bus or large truck license for more than 3 years, and have no full-point record in the two most recent scoring cycles before applying for A2. Alternatively, you can hold a large bus license for more than 1 year with no full-point record in the most recent scoring cycle before applying for A2. You can first get a B2 license: If you don't have any car license, the fastest way is to first get a B2 license. After holding the B2 license for 3 years with no full-point record in the two most recent scoring cycles before applying for A2, you can apply. Therefore, for those without any license who want to obtain an A2 license, it takes at least 3+ years.

15

4

Share

Where is the oil pressure sensor located on the EA211?

EA211's oil pressure sensor is bolted to the intake side, positioned near the timing belt within the cylinder head. Function of the oil pressure sensor: The oil pressure sensor in a vehicle is a crucial device for monitoring the engine's oil pressure. The detected data helps control the engine's normal operation. When insufficient oil pressure is detected, it triggers an alarm signal, illuminating the oil warning light on the dashboard. Common causes of low oil pressure alarms include a faulty oil pressure switch, insufficient oil, clogged oil pump screen, or a damaged oil pump. Working principle of the oil pressure sensor: The oil pressure sensor is installed on the engine's main oil gallery. During engine operation, the pressure measurement device detects oil pressure, converts the pressure signal into an electrical signal, and sends it to the signal processing circuit. After voltage and current amplification, the amplified pressure signal is transmitted via signal wires to the oil pressure gauge. This alters the current ratio between two coils inside the gauge, thereby indicating the engine's oil pressure. The amplified pressure signal is also compared with a preset alarm voltage in the alarm circuit. When the signal falls below the alarm voltage, the alarm circuit outputs an alarm signal, activating the warning light through the alarm line.

7

1

Share

What Documents Are Needed for a Car's First Maintenance?

The items required for the first maintenance include: driver's license; vehicle registration certificate; maintenance manual; warranty manual; owner's ID card; vehicle's driving license; vehicle's purchase invoice, to be taken to the designated first maintenance institution for the vehicle's first maintenance. Important note: Make an appointment with the 4S shop in advance. The first maintenance refers to the initial maintenance after a new car has been driven, with the specific time varying by vehicle, generally after driving 3,000~5,000 kilometers or about half a year. The car needs to undergo the first maintenance in time, neither early nor delayed. The completion of the first maintenance marks the end of the car's running-in period, allowing it to be driven according to the standard load and normal speed required by the vehicle. The time for the first maintenance is calculated based on the date of vehicle pickup. There are two indicator values for the first maintenance time: mileage and time. Whichever comes first is the standard. The first maintenance items include: changing the engine oil and oil filter, cleaning the air filter, checking if various oil levels are normal, inspecting the generator belt and wiper blades for damage, checking tire pressure for normalcy, and examining tires for damage or bulges, etc. Required time: It takes about 2 hours to complete all the work. The most important aspect of a new car's first maintenance is changing the engine oil and oil filter. When changing the engine oil, the oil filter must be replaced together, and the choice of engine oil must refer to the "Vehicle Usage and Maintenance Manual," as different vehicle models specify different engine oil grades. Maintenance precautions: Do not wash the interior of the car body with water: Many people clean and organize their cars during holidays, washing the body with water and wiping it with a cloth. Here, it's important to remind that the interior of the car body does not need to be directly washed with water. If the floor mats are dirty, you can use a vacuum cleaner or take them out, scrub them with a brush and detergent, dry them, and then put them back. There are many vent holes under the rubber mats on the floor of the driver's compartment. If water enters, it won't dry by air but will flow through the vent holes to areas like the gearbox, causing erosion and corrosion. A better approach is to clean with a vacuum cleaner and then wipe with a cloth to prevent water accumulation. Do not mix different brands of antifreeze: When the car's antifreeze is low, it's recommended to drain the antifreeze and add the same brand of antifreeze from the start. Since antifreeze brands differ, their chemical properties also vary significantly. Various functional corrosion inhibitors can corrode others. Different brands of antifreeze use different corrosion inhibitors, so they should not be mixed to avoid unnecessary trouble. Do not lubricate tire bolts and nuts: When the bolts on a moving car rust, it's common to oil them to make them function properly again. To prevent the bolts and nuts on the wheels from rusting, some people apply lubricating oil to them, but this brings necessary risks to safe driving. When the car is driving at high speed, the bolts and nuts can be easily loosened or even fall off, leading to driving malfunctions. Electronic fuel injection cars do not require stepping on the accelerator when starting: The starter of an electronic fuel injection car is different from that of a regular car, as its fuel injection control device can automatically adjust the fuel supply based on the starter's temperature and working conditions, ensuring a smooth start.

19

4

Share

What is the maximum speed of the new Baojun Valli?

Where is Dongfeng Honda's production location?

Why can only 40L be added to a 60L fuel tank?

What are the differences between the Mercedes-Benz G500 and the Mercedes-Benz G63?

How long does it take to get an A2 driver's license?

Where is the oil pressure sensor located on the EA211?

What Documents Are Needed for a Car's First Maintenance?

What Causes the Squeaking Noise When Driving Over Speed Bumps?

What is the difference between green license plates and blue license plates?

What needs to be replaced in a 30,000-kilometer car maintenance?

Do new cars need water added to the radiator?