What is the maximum speed of the Langdong?

3 Answers
DiReid
07/28/25 12:29pm
The Langdong can reach speeds of 140 or 160 km/h on highways, but the car may become unstable and unsafe. It is best to keep the speed within 100 km/h and avoid sudden acceleration or pressing the accelerator too hard. It is advisable not to exceed the speed limit. It is better not to drive that fast, as it is just a family car. Driving at very high speeds can easily lead to traffic accidents. New transmission components always have some minor surface imperfections, causing insufficient tightness in their engagement during operation. This results in more intense friction at contact points. If operated at excessively high speeds, the friction temperature at contact points may become too high or the load too great, leading to permanent damage to the components.
Was this review help?
5
2
Share
McBella
08/11/25 5:16pm
I've driven the Elantra for quite some time. With a full tank, it can run between 700 to 800 kilometers, depending on the driving environment and habits. In urban traffic with congestion, fuel consumption is higher, possibly around 6 to 7 liters per 100 kilometers, limiting the range to about 650 kilometers. However, on the highway, maintaining a steady speed of 80 to 100 kilometers per hour can reduce fuel consumption to below 5 liters per 100 kilometers, allowing a full tank to easily exceed 850 kilometers. Avoiding sudden acceleration and braking, and using cruise control can help save fuel and extend the range. Cold starts in winter and using air conditioning in summer also increase fuel consumption slightly, so it's advisable to adjust driving habits according to the season. Overall, as an economical compact car, the Elantra performs well in fuel efficiency, meeting daily needs adequately. Based on my actual measurements, an average of 750 kilometers per tank is quite common.
Was this review help?
16
2
Share
Expand All
AnnieAnn
09/28/25 7:04am
The official combined fuel consumption data for the Langdong is approximately 5.6 liters per 100 kilometers, with a standard fuel tank capacity of 50 liters, theoretically allowing a maximum range of 892 kilometers. However, in actual driving conditions, most users, including my own observations, report an average range of around 700 to 800 kilometers. This depends on road conditions; for example, fuel consumption can rise to 6.5 liters per 100 kilometers in congested urban areas, while it may drop to as low as 4.8 liters on smooth highways. Vehicle load and whether tire pressure is standard also significantly impact fuel efficiency—low tire pressure increases rolling resistance, leading to higher fuel consumption. Keeping these factors in mind, the Langdong's fuel economy is above average in its class, making it highly suitable for family commuting and long-distance travel, and it generally meets daily transportation needs.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

Are Domestic Teslas Eligible for Subsidies?

Domestic Teslas are eligible for subsidies, meeting the following new energy vehicle subsidy standards and requirements: 1. Pure electric passenger vehicles must have a maximum speed of no less than 100km/h within 30 minutes. The mass energy density of the power battery system for pure electric passenger vehicles must not be less than 90Wh/kg, and those exceeding 120Wh/kg will receive a 1.1 times subsidy. 2. For plug-in hybrid passenger vehicles with a pure electric driving range under 80km under test conditions, the fuel consumption in B state (excluding fuel consumption converted from electricity) must be less than 70% compared to the corresponding limit in the current national standard for conventional fuel consumption. Plug-in hybrid passenger vehicles with a pure electric driving range of 80km or more under test conditions must meet the same electricity consumption per 100km in A state as pure electric passenger vehicles.
7
2
Share

How to Turn on the Car Air Conditioning Cool Air?

Methods to turn on the car air conditioning cool air: 1. Press the vehicle's brake pedal. 2. Turn the car key to the ST position to start the engine. 3. Rotate the fan speed knob to the highest setting. 4. Turn the temperature knob to the far left blue zone. 5. Press the A/C button on the air conditioning panel to power the vehicle's compressor. 6. At this point, the air blown from the vehicle's vents will be cooled air. Here is some related information about the cool air from the air conditioning: 1. The cool air from the car air conditioning, which requires the compressor to be turned on, will only work after the vehicle is started. 2. The compressor is driven by the engine's rotational torque.
6
3
Share

Can Brand New Tires Still Be Used After 6 Years of Storage?

Brand new tires can still be used after being stored for 6 years. Here are relevant details about tires: 1. Generally, the service life of tires is 6-8 years, with a maximum of up to ten years. 2. Tires are composed of various performance materials and rubber compounds, whose characteristics will change over time. 3. For a tire, these changes are determined by many factors, such as climate, storage conditions, and usage conditions (load, speed, inflation pressure, maintenance, etc.), which persist throughout the entire service life of the tire. 4. Since there are many reasons for changes in tires due to usage, it is difficult to precisely determine the service life of a tire.
20
3
Share

Can the Engine Assembly Be Replaced for Oil Leakage During Warranty Period?

Generally, replacement is not allowed during the warranty period, and it is quite difficult to replace the entire assembly. Manufacturers and 4S shops usually prefer repair over replacement. Below are the common causes of engine oil leakage: 1. Oil pan gasket damage or loose screws causing oil leakage. 2. Oil drain plug gasket damage, missing, or looseness leading to oil leakage. 3. Improper installation, damage, or loose screws of the timing gear cover gasket causing oil leakage. 4. Engine support plate deformation or gasket sealing failure resulting in oil leakage. 5. Valve cover gasket sealing failure causing oil leakage. 6. Front crankshaft oil seal damage leading to oil leakage. 7. Rear crankshaft oil seal damage causing oil leakage.
9
0
Share

What Causes the Squeaking Sound When Braking on Baojun 310?

Baojun 310 produces abnormal noise when braking due to small metal particles inside the brake pads. Reasons for brake noise in Baojun 310: The vast majority of brake noises originate from the brake pads, accounting for more than 80% of cases. The noise from brake pads is usually caused by the scraping sound when they are worn out. In this case, simply replacing the brake pads will suffice. Another reason could be the aging of the brake pad surface or sharp edges, which can be resolved by grinding the surface and edges of the brake pads. Solutions for brake noise: If a screeching sound occurs when braking, check whether the brake pads are worn out or if there are any foreign objects. If the brake pads are worn out, they should be replaced immediately. If foreign objects are found, remove the brake pads, take out the foreign objects, and reinstall them. If a dull sound occurs when braking, check whether the brake caliper has worn pins or if the spring plates are detached. If any of these issues are found, they should be replaced immediately.
4
1
Share

Why does the idle speed stay high immediately after starting a cold engine?

The reasons for high idle speed when starting a cold engine: 1. The engine requires greater torque to transition from stationary to operational state. Therefore, during initial startup, the ECU controls increased air intake and fuel injection to ensure smooth engine ignition and operation. 2. During cold starts, lower temperatures result in suboptimal ignition conditions and poor fuel atomization in the cylinders, leading to incomplete combustion of the air-fuel mixture. 3. Since the engine hasn't reached optimal operating temperature, increased friction occurs between pistons and cylinder walls, as well as among moving components. This unstable operating condition necessitates higher RPM to prevent stalling after startup. 4. To rapidly achieve normal operating temperature (reducing wear on friction components) and quickly heat the catalytic converter to its optimal conversion range (minimizing emissions), the engine maintains elevated RPM to accelerate coolant temperature rise - this constitutes the warm-up process.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.