What is the maximum speed of the GSX250?

1 Answers
StJeremiah
07/29/25 11:53am
The maximum speed of the GSX250 is 140km/h. Here are the relevant details: 1. Power: In terms of power, this motorcycle is equipped with a twin-cylinder, four-stroke, water-cooled, naturally aspirated engine. This engine delivers a maximum power of 18.4kw and a maximum torque of 23.4 Nm, achieving a 0-100km/h acceleration time of just 9.5 seconds. 2. Engine: This motorcycle features a 4-cylinder engine from the Honda CB400. Without changing the displacement, this engine further improves the factory acceleration performance, significantly enhancing the motorcycle's straight-line capabilities. 3. Design: The bike comes with a full LCD display, which offers high visibility while riding and maximizes the rider's safety. The streamlined design reduces wind resistance during travel, providing the rider with more driving pleasure.
Was this review help?
14
5
Share
More Forum Discussions

What does ETC at highway toll gates mean?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. Highways are equipped with one or more ETC lanes. ETC toll collection method: Through dedicated short-range microwave communication between the vehicle's RFID tag installed on the windshield and the microwave antenna on the ETC lane at the toll station, the system connects with the bank for backend settlement processing. This allows vehicles to pass through bridge and road toll stations without stopping to pay toll fees. Banks install this type of ETC express card with a 'pay after use' approach. ETC application requirements are as follows: Provide the original and photocopy of the vehicle owner's valid ID and vehicle registration certificate. The photocopy of the driver's license should include the page with the most recent annual inspection stamp. Fill out a bank debit card application form, which will be used to bind the ETC card. After receiving the card, you can go to a designated bank branch to install the ETC onboard device for free, with no additional charges. Applicants must be between 18 and 60 years old and own a personal vehicle. Documents required for company vehicles: An introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID of the agent; original vehicle registration certificate; the vehicle that needs to apply for ETC. Below are precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror. Many car models have a steeply angled windshield, which can reduce the driver's field of vision. Installing the ETC without considering this may increase blind spots. Install it on the right side behind the rearview mirror to avoid blocking the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement, as it has a built-in solar panel on the back for self-charging. Therefore, avoid installing it on the blackened areas of the windshield or positions that may block the solar panel. Do not remove it randomly once installed: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After installation, the windshield will press the lever in. If removed, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device.
12
0
Share

When to Use S Gear?

Use S gear when overtaking or climbing hills. S gear is the sport mode of a car. When S gear is engaged, the engine speed is maintained in a higher range, providing greater torque output and acceleration, with power readily available on demand. The specific steps for using S gear in an automatic transmission are as follows: 1. Press the car's brake pedal to prepare for starting the engine; 2. Press the car's one-touch start button; 3. All dashboard lights will illuminate, indicating the engine has started. Then, shift the car's automatic gear lever to the S position to enter overtaking mode; 4. Press the accelerator pedal to easily overtake or climb hills. Although S gear offers robust power, it consumes more fuel and places greater load on the transmission and engine, so it should not be used frequently.
11
2
Share

What should you pay attention to when learning to drive?

Specific precautions for learning to drive are as follows: 1. Familiarize yourself with the basic operations of the vehicle and adjust your psychological state. 2. When starting, slowly release the clutch and gently press the accelerator: press the clutch all the way down, shift into first gear, release the handbrake, gently press the accelerator with your right foot and hold it steady, slowly release the clutch. When you feel the car move, hold the clutch steady, and once the car moves smoothly, slowly release the clutch completely while gradually pressing the accelerator. 3. When parking, engage the handbrake properly to prevent the vehicle from rolling. 4. Before downshifting, release the accelerator first, reduce the car to the desired speed, fully depress the clutch pedal, then gently apply some throttle, and shift the gear lever into the gear that matches the speed. 5. When accelerating, gently apply the throttle, press the clutch all the way down, and then shift the gear lever into the gear that matches the speed.
11
3
Share

How to use the cruise control on the Southeast DX3?

The operation method of cruise control is as follows: 1. Press the control switch to activate the cruise control standby mode, then accelerate and push the control lever downward to set the cruise speed; 2. To accelerate, push the control lever upward or step on the accelerator; 3. To cancel the cruise control, you can lift the control lever upward, turn off the main cruise control switch, step on the accelerator pedal, or lightly tap the brake. The usage method of cruise control is as follows: 1. Press the power key to turn on the cruise control system (some cars may have the on and off functions on the same key, while others may have separate keys). At this point, the cruise control indicator light on the dashboard will illuminate. 2. Increase the speed to your desired level, then press the SET key. You can then release the accelerator with your right foot, and the speed will be maintained at the current level. 3. If you need to fine-tune the speed, you can use the RES and SET- keys for adjustments. 4. Additionally, there are three ways to deactivate the cruise control: stepping on the brake, pressing the CANCEL key, or pressing the ON/OFF key. 5. If the cruise control is canceled by stepping on the brake or pressing the cancel key, you can press the RES key to resume the previous cruise control speed.
20
4
Share

Why Is Gear Shifting Difficult?

Reasons for difficult gear shifting: 1. The synchronizer is not working properly, excessively worn, or damaged; 2. The gear lever is deformed or loose; 3. The clutch is not fully disengaged, and the gear on the first shaft of the transmission is rotating at high speed, making it unable to engage with the internal teeth of the coupling sleeve; 4. The transmission coupling sleeve and the gear shift gears still need a running-in period. Manual transmission shifting techniques: 1. Shift gears according to the vehicle speed; 2. If the vehicle shakes while driving, it indicates that the engine is operating at low speed and high load, and it is necessary to immediately downshift by one or two gears based on the actual situation; 3. When shifting gears, the clutch and throttle should be well-coordinated. Press the clutch to the bottom, then release the throttle pedal, quickly shift to the corresponding gear, and immediately release your hand after shifting. Do not keep your hand on the gear lever for a long time, as it may easily damage the gear lever.
17
2
Share

What is the fuel tank capacity of the Geely Binrui?

Geely Binrui fuel tank capacity is 50 liters. The following introduces refueling precautions and fuel tank capacity calculation units: Refueling precautions: It is necessary to refuel the vehicle in time. When the fuel gauge pointer reaches the red line, you need to go to the gas station to refuel. Be careful not to refuel only when the gasoline is completely exhausted, as this will damage the car engine. Fuel tank capacity calculation unit: International standards use L as the calculation unit for car fuel tank capacity. Different countries also have corresponding standards for car fuel tank capacity. China stipulates that the car fuel tank capacity is 95% of the rated value, but depending on the actual situation, the actual capacity is generally larger than the nominal capacity.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.