What is the maximum speed of the BYD F3?

1 Answers
JuliannaDella
07/29/25 1:09pm
The maximum speed of the BYD F3 is 170 km/h. Here are the specific details: 1. Introduction: The BYD F3 is an A+ class passenger car produced by BYD Auto. The design concept of the F3 draws on the successful experience and model of Japanese and Korean car development. The MM design concept, which means maximizing the space for passengers while minimizing the space occupied by necessary machinery, runs through the entire design of the F3. 2. Exterior: The BYD F3 features a stylish and elegant exterior, with a simple and generous interior design. The light-colored interior gives a fresh feel, and the car is equipped with comprehensive features, including leather seats and a rear parking radar in high-end models. 3. Power: The F3 is equipped with a Mitsubishi 4G18 engine, paired with a 5-speed manual transmission. This is a mature engine known for its fuel efficiency.
Was this review help?
4
5
Share
More Forum Discussions

Can alcohol be used for disinfection in cars?

Alcohol can be used for disinfection in cars, with the following precautions: 1. Alcohol is a flammable and explosive product, so it should be wiped dry immediately after spraying for disinfection; 2. Keep alcohol in a well-ventilated environment and open the car windows; 3. Try to spray on the surface of objects and avoid spraying on hidden or hard-to-reach areas inside the car; 4. Do not smoke in the car after disinfection to prevent explosions or fires; 5. Avoid using alcohol to wipe leather seats. Other methods for car disinfection include: 1. Using an ozone-based car-specific disinfectant machine; 2. Utilizing a car oxygen bar to release ions and clean the air inside the car.
12
1
Share

Should the Handbrake Be Used for Hill Starts?

Hill starts require the use of the handbrake. The method for hill starts is as follows: 1. Press the brake pedal while pulling up the handbrake; 2. Shift the gear to L or S mode, then gradually apply throttle; 3. When the car's forward momentum is restrained by the handbrake, slowly release the handbrake, allowing the vehicle to begin climbing the slope smoothly. The method for stopping an automatic transmission vehicle on a slope is: 1. Engage the handbrake and press the foot brake; 2. Shift the gear to N before switching to P mode. The correct starting procedure for an automatic transmission vehicle is: 1. Press the start button, and the ACC light will illuminate as the vehicle performs a self-check; 2. Turn the ignition key to the second position, initiating the computer system's self-check; 3. Press the brake pedal and press the start button to ignite the engine; 4. Release the foot brake and let the engine warm up for 1 to 3 minutes; 5. Press the foot brake again, shift to D mode, and release the handbrake to start moving.
5
2
Share

What is the appropriate minimum ground clearance for an off-road vehicle?

An appropriate minimum ground clearance for an off-road vehicle ranges from 170 to 210mm. Ground clearance determines the vehicle's ability to pass obstacles, referring to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when fully loaded and stationary. It characterizes the vehicle's capability to pass over obstacles such as rocks and tree stumps without collision. Off-road vehicle models include: Haval H6, Geely Boyue, Honda CR-V, Honda Vezel, Nissan Qashqai, etc. Taking the 2021 Nissan Qashqai as an example, its body dimensions are: length 4401mm, width 1837mm, height 1593mm, wheelbase 2646mm, and minimum ground clearance 181mm.
8
2
Share

What are the body dimensions of the Dongfeng Fengshen AX7?

The body dimensions of the Dongfeng Fengshen AX7 are: length 4645mm, width 1880mm, height 1670mm, with a wheelbase of 2715mm. It has a fuel tank capacity of 61 liters and features front-wheel drive. The front suspension uses MacPherson independent suspension, while the rear suspension employs double-wishbone independent suspension. The Dongfeng Fengshen AX7 is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 110 kW at 5500 rpm and a maximum torque of 230 N·m between 1800 to 4000 rpm.
19
1
Share

What car has a bull as its logo?

A bull logo represents Lamborghini. Taking the 2021 Lamborghini Urus as an example, it is a mid-to-large size 5-door, 5-seat SUV with the following dimensions: length 5112mm, width 2016mm, height 1638mm, and a wheelbase of 3003mm. The 2021 Lamborghini Urus is equipped with a 4.0T twin-turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 478 kW at 6000 rpm and a peak torque of 850 N·m between 2250 to 4500 rpm. It features a front-engine, four-wheel-drive layout with multi-link independent suspensions at both front and rear.
4
2
Share

How often should the coolant be replaced in a Volkswagen Phideon?

Volkswagen Phideon's coolant should be replaced every 2 years or 40,000 kilometers. The coolant is added to the car's radiator. The Volkswagen Phideon is a mid-to-large-sized 4-door 5-seater sedan with the following body dimensions: length 5074mm, width 1893mm, height 1489mm, and a wheelbase of 3009mm. The Volkswagen Phideon is equipped with a 2.0T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 165 kilowatts at 4500 to 6250 revolutions per minute, and a maximum torque of 350 Newton-meters at 1650 to 4500 revolutions per minute. It features front-wheel drive, with a five-link independent suspension at the front and a trapezoidal link independent suspension at the rear.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.