What is the maximum speed of the Binyue?

What does 'off' mean when it appears in the car?

In cars, 'off' means to turn off, and it usually appears on function buttons inside the vehicle. Relevant information is as follows: 1. On the air conditioning: The 'off' function button controls the car's air conditioning. When the air conditioning is on, pressing the 'off' button will turn it off. Pressing the 'off' button again will restart the air conditioning. 2. On the light lever: 'Off' on the car's light lever is used to turn off the car lights. An 'a' above 'off' refers to the engine auto start-stop function, which is enabled by default. If the function button light is on, it means the start-stop function is turned off; if the light is off, it means the start-stop function is active. 3. On the ESP: There is also 'ESPOFF.' ESP stands for the Electronic Stability Program, which is an active safety device mainly designed to prevent the car from skidding or losing control. If the ESPOFF light on the car is illuminated, it means the car's electronic stability control system is either turned off or malfunctioning.

102

Share

What Type of Oil Should Be Used for the 2019 Sylphy?

The official manual for the 2019 Sylphy recommends engine oil with a specification of 5W-30. Any oil that meets this specification can be used. If you want to change the oil during later maintenance, you can choose brands such as Shell, Mobil, Castrol, or Total. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as providing better lubrication performance under high-temperature conditions. The method for changing the oil in the 2019 Sylphy is as follows: Wait for the engine temperature to drop and allow the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine for 30 seconds to allow the oil in the main oil passages to drain out; Use a specialized wrench to remove the oil filter; apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the oil filler cap on the engine valve cover. Generally, fill up to three-quarters of a standard oil container; Start the engine and let it run for 5 minutes, then check for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check if the engine oil level is within the standard range.

113

Share

What is the emission standard of Geely Emgrand?

Geely Emgrand complies with China V and China VI emission standards. The following are specific introductions about China V and China VI emission standards: 1. China VI standard emission limits: China VI A: carbon monoxide 700mg/km, non-methane hydrocarbons 68mg/km, nitrogen oxides 60mg/km, PM fine particles 4.5mg/km, etc.; China VI B: carbon monoxide 500mg/km, non-methane hydrocarbons 35mg/km, nitrogen oxides 35mg/km, PM fine particles 3mg/km, etc. 2. China V standard emission limits: carbon monoxide emissions per kilometer driven must not exceed 1000 milligrams; non-methane hydrocarbon emissions per kilometer driven must not exceed 68 milligrams; nitrogen oxide emissions per kilometer driven must not exceed 60 milligrams; PM fine particle emissions per kilometer driven must not exceed 4.5 milligrams.

104

Share

Is it no longer necessary to display insurance stickers on vehicles?

Currently, in some cities across the country, vehicle owners are not required to display insurance stickers on their windshields. It's important to note that this applies only to certain cities nationwide, as electronic insurance policies have not yet been implemented across the entire country. Relevant information about compulsory traffic insurance is as follows: 1. Introduction: The full name of compulsory traffic insurance is "Compulsory Traffic Accident Liability Insurance for Motor Vehicles." It is a mandatory liability insurance where the insurance company compensates for personal injuries, fatalities, and property losses (excluding those of the vehicle's occupants and the insured) caused by road traffic accidents involving the insured vehicle, within the liability limits. 2. Necessity: Compulsory traffic insurance ensures compensation for victims of motor vehicle road traffic accidents and promotes road traffic safety. It provides timely and basic protection for victims of traffic accidents.

119

Share

Are there license plate restrictions on highways?

On highways, there are no restrictions on vehicle license plate numbers. License plate restrictions are generally implemented in urban areas as a policy by traffic management authorities to alleviate traffic congestion. Maximum speed limits on highways: The maximum speed for passenger cars on highways shall not exceed 120 km/h, other motor vehicles shall not exceed 100 km/h, and motorcycles shall not exceed 80 km/h. For roads with 2 lanes in the same direction: On highways with 2 lanes in the same direction, the minimum speed for the left lane is 100 km/h. For roads with 3 or more lanes in the same direction: On highways with 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and the minimum speed for the middle lane is 90 km/h. Vehicles prohibited from entering highways: Pedestrians, non-motor vehicles, tractors, wheeled special machinery vehicles, articulated buses, full trailer trucks, and other motor vehicles with a design speed below 70 km/h are not allowed to enter highways.

115

Share

What to Do If a Vehicle Fails the Environmental Protection Inspection?

If a vehicle fails the environmental protection inspection, it needs to undergo repairs and can only be driven on the road after passing the re-inspection. Any vehicle that exceeds the emission standards at an environmental inspection station (I-Station) must be treated by a qualified maintenance facility before it can be driven legally. Relevant information about vehicle emission standards is as follows: 1. Introduction: Vehicle emission standards regulate the permissible levels of harmful gases emitted from vehicle exhaust, including CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot). 2. Implementation Status: Starting from January 1, 2004, Beijing upgraded its vehicle emission standards from Euro I to Euro II. By 2008, the Euro III standards were officially implemented.

103

Share

What is the maximum speed of the Binyue?

What does 'off' mean when it appears in the car?

What Type of Oil Should Be Used for the 2019 Sylphy?

What is the emission standard of Geely Emgrand?

Is it no longer necessary to display insurance stickers on vehicles?

Are there license plate restrictions on highways?

What to Do If a Vehicle Fails the Environmental Protection Inspection?

Which country produces Dongfeng Peugeot?

How long does it take for a truck's fatigue driving record to be automatically cleared?

How to Charge a Dead Battery in Trumpchi GS4?

What is the Difference Between Officially Imported Cars and Gray Market Vehicles?