···
Log in / Register

What is the maximum speed of an 800W motor with a 1000A controller?

4 Answers
VonAyla
07/29/25 11:40am
Electric vehicles with 800W motors generally have a speed range of 35km/h to 40km/h, which is a speed limit set by manufacturers to ensure battery life. Typically, 60V electric vehicles are limited to speeds below 35km/h, while 72V electric vehicles are limited to speeds below 40km/h. By removing the voltage limit of the controller and increasing the current, the motor's speed can be increased. After removing the speed limit, the maximum speed can reach around 50km/h. Additional content, precautions: 1. Charging: Avoid charging for too long. In summer, high temperatures increase the risk of battery thermal runaway. It is best to charge for 6-8 hours. If the battery is not used for a long time, it is recommended to recharge it every two months to prevent irreversible sulfation due to prolonged discharge, which can kill the battery. After six months to a year of use, it is advisable to add supplementary fluid to the battery to extend its lifespan. 2. Pay attention to riding with or without brakes: Riding with brakes engaged causes the motor to heat up, leading to demagnetization of the magnets, resulting in reduced power and shorter battery life. If the motor makes noise, repair it promptly and check the bearings to prevent steel particles from rolling out and cutting the coils, which can render the motor useless.
Was this review help?
18
5
Share
DelLila
08/13/25 8:06pm
I usually enjoy tinkering with electric vehicles and often do modifications myself. If equipped with an 800-watt motor and a 1000-watt controller, the top speed can typically reach around 45 to 55 kilometers per hour, but this isn’t fixed—it depends on the specific conditions. For example, battery voltage is crucial; a 48V battery can be about 10% faster than a 36V one. Personally, I’ve tested speeds up to around 50 km/h. The weight of the vehicle also matters—if you add heavy-duty equipment, the speed might drop below 40 km/h. Wind resistance can’t be ignored either; you’ll go faster on flat, straight roads, but speed noticeably drops when facing wind or uphill slopes. A higher-power controller can make the motor output more aggressive, but overloading the motor can cause overheating and damage, so pay attention to cooling and safety tests. I recommend testing in an open area and avoiding rough or crowded roads.
Was this review help?
7
2
Share
Expand All
SadieLynn
10/08/25 5:49am
As an experienced electric scooter user, I've ridden models with 800W motors and roughly 1000W controllers many times, with top speeds fluctuating between 45 to 50 km/h. I remember feeling it was too fast and a bit scary during my first ride. In reality, speed depends on your weight and road conditions - lighter riders go faster while heavier ones may be slower. Battery level is also crucial; full charge delivers strong power and higher speeds, dropping by 5-10 km/h at half charge. I've also noticed that proper tire inflation reduces friction and slightly increases speed. Oversized controllers provide quicker acceleration but drain batteries faster. Ultimately, these values aren't fixed - safety should always come first over chasing limits.
Was this review help?
4
2
Share
Expand All
DiLorenzo
11/21/25 7:09am
The top speed depends on the configuration. With an 800W motor paired with a 1000W controller, it can reach approximately 50 km/h. Experiences vary among individuals; lighter riders may achieve higher speeds. Smooth road conditions are necessary to approach the upper limit.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What is the license type for agricultural vehicles?

Agricultural vehicles generally require a C3 driver's license. Below is additional information: 1. The new version of motor vehicle driver's license categorizes permitted vehicle types as follows: A1 (large buses), A2 (towing vehicles), A3 (city buses), B1 (medium buses), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars). 2. C3 driver's license: Low-speed trucks C3: Low-speed trucks, originally four-wheel agricultural transport vehicles and light trucks, with a vehicle length less than 6m and a total mass less than 4500kg.
2
0
Share

Reasons for Abnormal Noises When Passing Over Speed Bumps

When passing over speed bumps, the repeated abnormal noises are often due to the friction sound from the stabilizer bar bushings. These bushings tightly wrap around the metal rod, and when going over speed bumps, the rotation of the metal rod against the bushings produces the noise. Generally, this sound cannot be heard from outside the vehicle. Additionally, if the installed engine guard is deformed or the screws are loose, it can also cause abnormal noises while driving. Furthermore, unauthorized modifications to wiring or the installation of electrical devices in the engine compartment that are not securely fixed can lead to such noises. Below is some relevant knowledge about shock absorber inspection: Check the shock absorbers for any deformation or oil leakage. The shock absorber top mount has three screws, which should be tightened with a wrench. The issue might also be caused by dry friction due to insufficient lubrication of the upper and lower shock absorber bushings. These can be removed and lubricated with grease.
9
2
Share

What is the function of the canister purge solenoid valve in a car?

The canister purge solenoid valve in a car mainly serves the following purposes: 1. The canister purge solenoid valve is a device installed in cars or motorcycles to reduce air pollution caused by fuel vapor emissions while simultaneously improving fuel efficiency. 2. When the engine is turned off, the vehicle's activated carbon canister begins to absorb fuel vapors evaporating from the fuel tank and securely locks them within the micropores of the activated carbon in the canister, preventing the fuel vapors from being released into the atmosphere. 3. When the engine is started, the canister purge solenoid valve opens, releasing the adsorbed fuel vapors into the intake manifold to be burned in the engine.
1
4
Share

What is a Naturally Aspirated Engine?

Naturally aspirated engine refers to the air intake method of an engine. Naturally aspirated means the engine does not have any forced induction equipment. It relies entirely on the vacuum created by piston movement within the engine to draw in air and the combustible mixture. Below are relevant introductions: 1. Naturally Aspirated: Naturally aspirated (English: Normally-Aspirated) is a type of automobile air intake, which is a form where atmospheric pressure forces air into the combustion chamber without any supercharger. Most ordinary cars use naturally aspirated engines, and later, to increase engine power and efficiency, forced induction was introduced. 2. Advantages: Naturally aspirated engines have lower combustion efficiency, but their output is more linear. Naturally aspirated engines offer better smoothness in power delivery and more direct response compared to forced induction engines.
8
5
Share

What are the function keys of the 2011 old model GL8?

11-year-old GL8 multi-function buttons have the following related introductions: 1. Steering wheel function keys: The left side is the cruise control, voice control and telephone function buttons, the right side is the volume control, track switching and multi-function instrument panel control buttons, the back of the steering wheel is the light lever, wiper lever, and the top is the shift paddle. 2. Central control function keys: multi-function joystick, steering wheel shift buttons, instrument panel combination instrument, driver information center (DIC) control button, hazard warning flasher switch, front fog light switch, rear fog light switch. 3. Other function keys: audio system buttons, exterior light control button, interior light control button, instrument panel brightness control button, hood release device, parking brake.
18
4
Share

How often should the transmission fluid in a Cullinan be changed?

Rolls-Royce Cullinan's transmission fluid generally needs to be replaced every three years or 60,000 kilometers. Transmission fluid is an oil product that keeps the gear system clean, ensuring the normal operation of the transmission and extending the life of the transmission device. Depending on the structure of the transmission, transmission fluids are divided into: 1. Manual transmission fluid, commonly referred to as gear oil. It is an important lubricating oil primarily made from petroleum lubricating base oil or synthetic lubricating oil, with the addition of extreme pressure anti-wear agents and oiliness agents. 2. Automatic Transmission Fluid (ATF), specifically designed for automatic transmissions. The specialized fluid used in automatic transmissions serves both as the hydraulic fluid for the torque converter and as the lubricating oil for the planetary gear structure and the hydraulic fluid for the shifting device.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.