What is the maximum speed limit for non-motorized lanes?

1 Answers
FranciscoLee
07/29/25 3:37pm
The maximum speed limit for non-motorized lanes cannot exceed 30 km/h. Daily driving precautions are as follows: 1. Carry emergency items: Equip your vehicle with emergency supplies such as rescue hammers, fire extinguishers, and first aid kits. This not only provides a sense of security while driving but also enables self-rescue or assistance to others in case of emergencies, serving as an excellent safety measure. 2. Check vehicle condition: Always inspect various components of the vehicle before driving, such as tires, lights, and fluids, and repair any issues promptly. After driving on highways for more than 2 hours, take advantage of rest stops at service areas to inspect key parts of the vehicle, including tires, tire pressure, and engine oil, ensuring safety for the next leg of the journey. 3. Never reverse or make a U-turn on highways: On highways, rear-end collisions often occur due to unfamiliar roads, low-speed driving, reversing, or sudden stops. Plan your route in advance, use navigation whenever possible, and pay attention to road signs. Typically, reminder signs appear about 2 kilometers before exits. If you miss an exit, never reverse or make a U-turn. Instead, continue to the next exit and adjust your route accordingly.
Was this review help?
17
5
Share
More Forum Discussions

What Do Oil Parameters Mean?

Oil parameters refer to the temperature performance of engine oil, also known as engine lubricating oil. Its functions include: 1. Lubrication and friction reduction; 2. Assisting in cooling and temperature reduction; 3. Sealing and leak prevention; 4. Rust and corrosion prevention; 5. Shock absorption and buffering. Engine oil consists of base oil and additives. Base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve the shortcomings of base oil performance. It can be categorized into diesel engine oil and gasoline engine oil. Engine oil is classified by viscosity index into: 1. Low viscosity index; 2. Medium viscosity index; 3. High viscosity index; 4. Very high viscosity index; 5. Ultra-high viscosity index.
11
1
Share

What does the vehicle warranty period include?

Vehicle warranty period includes: replacement of air filter, oil filter, spark plugs, brake linings, and clutch plates. The vehicle warranty period refers to the time period during which the car manufacturer promises to provide free repairs and maintenance for faults caused by quality issues when selling the product to consumers. The warranty period for cars is usually 3 years or 60,000 kilometers, whichever comes first. Once either condition is met, it indicates that the car's warranty period has expired. After the warranty period, the owner is responsible for all expenses. Additionally, if the vehicle is not maintained according to regulations, or if damage is caused by unauthorized modifications or improper use, it will not be covered by free warranty even during the warranty period.
1
2
Share

What Causes the Tire Pressure Indicator Light to Illuminate?

The reasons for the tire pressure indicator light to illuminate are: 1. The tire pressure is not within the normal range; 2. Air leakage or punctures causing insufficient tire pressure; 3. Excessive tire pressure. Tire pressure refers to the air pressure inside the tire. The effects of excessive tire pressure include: 1. Increased friction between the tire and the ground, reducing tire adhesion; 2. Affecting the vehicle's braking performance and driving comfort; 3. Accelerating wear on the central tread pattern, reducing tire lifespan. The effects of insufficient tire pressure include: 1. Increased contact area between the tire and the ground, leading to easier tire overheating; 2. Expansion of the tire body, making it prone to cracks on both inner and outer sides; 3. Accelerated rubber aging and faster tire wear.
2
5
Share

How to reset the maintenance indicator light on FAW Besturn X40?

The method to reset the maintenance indicator light on FAW Besturn X40 is: 1. Press and hold both arrow buttons simultaneously, then turn on the ignition switch; 2. Release both arrow buttons after approximately 3 seconds; 3. Press and hold the SET button for more than 3 seconds, then press the MODE button; 4. Turn off the ignition switch to complete the process. Taking the 2019 FAW Besturn X40 as an example, its body dimensions are: length 4310mm, width 1780mm, height 1680mm, with a wheelbase of 2600mm. The 2019 FAW Besturn X40 is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 84kW and a maximum torque of 155Nm, paired with a 5-speed manual transmission.
14
0
Share

What is the relationship between Mercedes-Benz and Maybach?

Maybach is a brand under Mercedes-Benz. Taking the Maybach S-Class 2020 model as an example, its body dimensions are: length 5466mm, width 1899mm, height 1500mm, wheelbase 3365mm, fuel tank capacity 70l, and the body structure is a 4-door 5-seater sedan. The Maybach S-Class 2020 is equipped with a 3.0t twin-turbocharged engine, with a maximum power of 270kw and a maximum torque of 500nm, matched with a 9-speed automatic transmission. It adopts double-wishbone independent suspension for both front and rear suspension, and the body structure is a unibody.
16
0
Share

What is the difference between 5W-30 and 10W-40?

The differences between 5W-30 and 10W-40 are as follows: 1. Different viscosity. The number after the letter W indicates the viscosity characteristics of the oil at high temperatures. 10W-40 oil has a higher viscosity than 5W-30. High-viscosity oil may be more suitable for high-speed driving or heavy-duty vehicles. 2. Different low-temperature fluidity. Oil starting with 5W has better low-temperature fluidity and can be used in colder regions. Oil starting with 5W can handle environments above -30 degrees Celsius, while 10W can only be used above -25 degrees Celsius.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.