···
Log in / Register

What is the maximum speed limit for making turns or U-turns while driving a motor vehicle?

3 Answers
VonLouis
07/29/25 7:47pm
Motor vehicles making turns or U-turns must not exceed a speed of 30 km/h; According to Article 46 of the 'Road Traffic Safety Implementation Regulations,' when a motor vehicle encounters any of the following situations while driving, the maximum speed must not exceed 30 kilometers per hour, and for tractors, battery-powered vehicles, and wheeled special-purpose machinery vehicles, the speed must not exceed 15 kilometers per hour: 1. When passing through railway crossings, sharp curves, narrow roads, narrow bridges, curves, bridges, tunnels, or sections covered with snow, ice, or mud, the speed must not exceed 30 kilometers per hour in all these areas; 2. When making U-turns, turns, descending steep slopes, encountering visibility below 50 meters, or when towing another motor vehicle, the maximum speed must also not exceed 30 kilometers per hour.
Was this review help?
12
3
Share
Jared
08/14/25 3:20pm
The maximum speed when making a U-turn should not exceed 30 km/h. As an experienced driver with over a decade behind the wheel, I fully understand the dangers of taking turns at excessive speeds. Every time I make a U-turn, I always slow down to below 25 km/h in advance, because the 30 km/h speed limit isn't arbitrarily set. Exceeding this speed increases the vehicle's centrifugal force and reduces tire traction, making it prone to skidding or losing control. I once took a turn at 40 km/h on a rainy day and almost slid off the road - the thought still makes me shudder. Nowadays, I make it a habit to start slowing down at least 50 meters before a turn, while checking for pedestrians or obstacles. New drivers should be especially cautious, as urban roads are particularly hazardous - don't risk safety to save time. Developing good habits and driving safely is what matters most, because life always comes first.
Was this review help?
8
0
Share
Expand All
SanJameson
10/15/25 7:25am
The speed limit for turning or making a U-turn is 30 kilometers per hour. As a young driver who recently obtained my license, I find this regulation quite reasonable. I remember my instructor repeatedly emphasizing that turning at high speeds is extremely dangerous and could also result in a fine if caught by surveillance cameras. During my daily commute, I always keep an eye on the speedometer to ensure I don't exceed the limit when making a U-turn. Once, a friend was in a hurry for a date and took a turn too fast, causing the wheels to skid and scrape against the curb. The repair cost several thousand yuan—totally not worth it. So, I recommend slowing down in advance and handling the steering smoothly. Keeping your speed under control reduces accidents and makes driving much more relaxing. Especially in urban areas with many pedestrians, extra caution is necessary—safety is more important than anything else. Following the rules makes driving much more enjoyable.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

What are the precautions during the break-in period of a new car?

Precautions during the break-in period of a new car: 1. Warm up before starting - turn the key to the second position and wait 5 to 10 seconds before starting the engine; 2. Avoid long-distance trips - prolonged continuous operation of the engine during long trips can accelerate component wear; 3. Initial maintenance - regularly check engine oil, coolant, and battery electrolyte levels during the break-in period, and top up immediately if any are low; 4. Use high-quality gasoline - the engine oil used should not be of a lower grade than specified by the manufacturer, and avoid adding anti-wear additives to prevent insufficient break-in despite sufficient mileage.
1
4
Share

How High Can a Car Jack Lift?

Mechanical jacks can typically lift to a maximum height of approximately 600 millimeters, including both the base and the extension. The height of a jack is divided into three parts: minimum height, auxiliary height, and maximum height. Here are the specific details: 1. Minimum height: This refers to the height from the top of the bearing seat to the ground when the jack is not in use, representing the hydraulic condition. 2. Auxiliary height: This refers to the additional height achievable by rotating the threaded bearing seat from its end, with the highest point after rotation called the auxiliary height. 3. Maximum height: This is the total height achieved when the jack is extended to its highest point, and if there is an auxiliary height, it is also rotated to its maximum. The sum of these two heights gives the maximum height.
6
1
Share

What Oil Should a Cadillac Use?

Cadillac vehicles typically use engine oil with a viscosity of 5W30. Given that most Cadillac models feature high-performance, turbocharged engines, it is recommended to use fully synthetic oil. Among fully synthetic oils, 5W30 offers a good balance of cost and performance, providing excellent low-temperature startup lubrication and high-temperature oil film strength that is nearly comparable to 5W40. It also delivers strong power performance and contributes to fuel efficiency. Taking the Cadillac CT5 as an example, this model measures 4924mm in length, 1883mm in width, and 1453mm in height, with a wheelbase of 2947mm. It is a 4-door, 5-seater sedan equipped with a 10-speed automatic transmission.
11
4
Share

What to do if the clutch pedal becomes very hard halfway and cannot be pressed down?

If it is a hydraulic clutch, it is likely that the pressure plate in the transmission is damaged. Replacing it with a new pressure plate should resolve the issue. If it is a cable-operated clutch, the clutch cable may be too tight. Adjusting it to be looser or replacing it with a new cable should fix the problem. For example, if the master cylinder return spring is broken and stuck, or the rubber cup is swollen, it is recommended to replace the clutch master cylinder with a new one.
5
3
Share

Can Perfume Be Placed in a Car?

Perfume should not be placed in a car. Here is an introduction to car perfumes: 1. Introduction: Car perfume refers to decorative perfumes placed inside a car, usually stored in exquisite crystal perfume holders. With their attractive appearance and pleasant fragrance, car perfumes appeal to car owners. 2. Types: The common car perfumes on the market mainly include aerosol, liquid, and solid types. Aerosol car perfumes are mainly composed of fragrance and containers, which can mask certain specific odors in the car. 3. Identification: The quality of a good car perfume can be judged by its scent. A good car perfume typically has a mild fragrance, and even if it is strong, it should not be overpowering or irritating, providing a comfortable smell.
13
5
Share

What to Do When the Clutch Suddenly Becomes Hard to Press?

Use the front part of the sole to press down, adjust the seat forward, try to wear flat shoes, press with the ball of the foot, and support with the heel, so that more force can be applied. Hydraulic clutch: The pressure plate in the transmission is damaged, replace it with a new one; Cable clutch: The cable is too tight, replace it with a new one. Try to wear flat shoes, press with the ball of the foot, and support with the heel, so that more force can be applied.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.