What is the maximum speed limit for making a U-turn?

1 Answers
AliyahDella
07/25/25 8:36am
U-turns should not exceed 30 kilometers per hour. When making a U-turn, you should activate the left turn signal in advance and must not obstruct other vehicles or pedestrians traveling normally. Permissible scenarios for U-turns are as follows: Presence of U-turn traffic lights or signs: When there is a U-turn traffic light at an intersection, you may make a U-turn when the U-turn indicator is green. If there is a U-turn sign at the intersection or a U-turn marking on the lane, you may make a U-turn after ensuring the safety of yourself and others. No U-turn signs but left turns are allowed (no prohibition of U-turn signs or markings): Vehicles may make a U-turn at intersections where left turns are permitted and no prohibition of U-turn signs or markings are present. Note that vehicles must proceed according to the left-turn lane traffic signal without affecting the normal travel of other vehicles. If making a U-turn at an intersection with a left-turn waiting area, you may first enter the left-turn waiting area when the straight-through light is green and wait until the left-turn light turns green to proceed with the U-turn. U-turns are allowed at dashed lines: U-turns are permitted at both white and yellow dashed lines. For double yellow lines with one solid and one dashed, check whether your side is the dashed line. If it is, you may make a U-turn safely; if it is solid, U-turns are not allowed. If encountering such lines at an intersection, you may make a U-turn on the dashed side, but you must not cross the stop line ahead. U-turns are allowed at yellow grid lines: Parking is prohibited in yellow grid line areas, but as long as there is no central barrier, you may make a U-turn here after yielding to normally traveling vehicles. U-turns are allowed on the dashed side of a green belt: When the front of the green belt is a dashed line, vehicles on that side may make a U-turn from there. When the front of the green belt is a solid line, vehicles must follow the traffic signal, cross the zebra crossing before making a U-turn, and are prohibited from crossing the solid line or zebra crossing during the U-turn.
Was this review help?
14
5
Share
More Forum Discussions

What is the difference between off-line parts and original parts?

The difference between off-line parts and original parts: 1. Different manufacturers: Off-line parts are accessories that come off the automobile assembly line; original parts are the accessories that come with the car itself. 2. Different manufacturer authorizations: Off-line parts are not authorized or certified by the automobile manufacturer; original parts are authorized and certified by the automobile manufacturer. Tips for identifying the quality of automobile parts: 1. Original parts usually have standardized packaging with clear and regular printing, while counterfeit products have rough and inferior packaging printing; 2. Some original parts are specified in a certain color, and parts in other colors are counterfeit; 3. Original parts are made of qualified materials according to design requirements, while counterfeit products mostly use cheap and inferior substitute materials; 4. Inferior products are prone to cracks, sand holes, slag inclusions, burrs, or bruises in appearance.
19
3
Share

How to Reset the Maintenance Light on a Zotye Car?

Zotye Car Maintenance Light Reset Method: Turn on the ignition switch, press and hold the reset button with one hand while turning off the ignition switch with the other hand. Wait until the clock and mileage on the dashboard completely disappear, then release the button. Press and hold the reset button again and turn the ignition switch back on. The Zotye car has a body length, width, and height of 5020mm, 1877mm, and 1469mm respectively, with a wheelbase of 3000mm. It is equipped with a Mitsubishi high-performance and mature technology engine, which delivers strong torque in both low and high-speed ranges while maintaining high stability, making it suitable for various road conditions. The emissions meet the National III standard.
15
1
Share

Is it necessary to service the car every 5,000 kilometers?

It is not mandatory to service the car every 5,000 kilometers. The frequency of car maintenance varies depending on the brand, model, and type of engine oil used. Generally, mineral oil should be replaced approximately every 5,000 kilometers or every six months; semi-synthetic oil should be replaced around every 7,500 kilometers or every nine months; and full-synthetic oil should be replaced every 10,000 kilometers or every year, whichever comes first. Car maintenance primarily includes servicing the engine system, transmission system, air conditioning system, etc., aiming to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the vehicle's lifespan.
13
3
Share

Is Pressing the Clutch the Same as Shifting to Neutral?

Pressing the clutch and shifting to neutral have the same effect in terms of disconnecting the driving wheels from the transmission. In neutral gear, the transmission is still connected to the engine via the clutch, which remains engaged. When in neutral, the engine's power has already reached the transmission, but the neutral position means the power hasn't been transmitted to the drive axle, and it's used when the vehicle is stationary. Pressing the clutch stops the engine's power from reaching the transmission, which is used during starting and gear shifting. Pressing the clutch cuts off the power between the engine and the transmission, disconnecting the transmission from the engine, while the driving wheels rotate by inertia, causing all the gears in the transmission to rotate together.
3
5
Share

How to Reverse Park When There Are Cars on Both Sides?

First, maintain a horizontal distance of about 1.5 to 2 meters between your car and the parking space line, and adjust the vehicle accordingly. Depending on the size of the vehicle, stop the car one parking space ahead of the target spot, with the driver's position aligned to the middle of the parking space. Turn the steering wheel fully to the left and slowly reverse into the spot. Adjust slightly by observing the side mirrors or the reversing camera to maintain a safe distance from the cars on both sides. When the vehicle is parallel to the parking space, straighten the wheels and continue reversing until the car is fully parked.
20
2
Share

What is the emission standard of the Roewe i6?

The Roewe i6 complies with the China VI emission standard. The Roewe i6 is a model under the Roewe brand. In terms of body dimensions, it measures 4671mm in length, 1835mm in width, and 1464mm in height, with a wheelbase of 2715mm. The front suspension is of the MacPherson independent type, while the rear suspension is a multi-link independent setup. In terms of exterior design, the Roewe i6 adopts a wide and flat style, with the overall design consisting of smooth surfaces and sharp lines, giving the car a very sporty character. Additionally, the concept car features a ducktail-style rear design with a swallowtail cut-in style, where all lines converge at the taillights, resulting in high recognizability.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.