···
Log in / Register

What is the maximum speed limit for first gear in Subject 3?

4 Answers
McBrooklyn
07/28/25 11:58am

In Subject 3, the first gear should not exceed 15 km/h. Shift to first gear when below 10 km/h, and shift to second gear when above 15 km/h. Third gear should be no less than 20 km/h and no more than 40 km/h. Fourth gear should be no less than 30 km/h and no more than 50 km/h. Details are as follows: Subject 3 test content: The road driving skills test for Subject 3 generally includes preparation before starting, simulated lighting test, starting, driving straight, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting other vehicles, etc. Subject 3 penalty criteria: Failing to fasten seat belts or wear helmets as required, inability to correctly use vehicle components such as lights or wipers, or starting with a distance of more than 750 cm behind the vehicle will result in an immediate deduction of 100 points.

Was this review help?
13
2
Share
LaNoah
08/11/25 4:48pm

When taking the driving test for Subject 3, never drive too fast in first gear. Generally, you shouldn't exceed 15 km/h. I drove in first gear a few times, and as soon as the speed went above 15, the car started shaking violently. The instructor immediately told me to stop, saying the engine couldn't handle it and it could easily damage the car. During practice, pay close attention to the speedometer and keep it steady between 10 and 15 km/h. When I was first learning to drive, a friend accidentally went up to 20 km/h, and the examiner deducted points on the spot, resulting in a failed test and requiring a retake, which cost extra time and money. Remember, a smooth start is key—don't rush, take it slow, and you'll pass. Safety first, and developing good habits is crucial.

Was this review help?
8
3
Share
Expand All
FaithDella
09/28/25 6:09am

I just passed the road test (Subject 3), and the biggest lesson was my instructor's warning not to exceed 15 km/h in first gear. On exam day, I got too nervous during startup and accelerated to 18 km/h—the car jerked violently, the examiner frowned, and I nearly failed. Later, my instructor explained that first gear is for low-speed starts; excessive speed strains the engine and wears the clutch. Looking back, ignoring this could've meant retaking the test. During practice, I used my phone to monitor speed as a reminder and maintained this habit to avoid aggressive throttle inputs. Proper speed control was key to passing. Driving isn't just about skill—it's about attentiveness.

Was this review help?
14
5
Share
Expand All
MacKeira
11/11/25 8:02am

From a safety perspective, it makes perfect sense that the speed limit for first gear in Subject 3 should not exceed 15 km/h. High-speed starts pose significant risks, as the vehicle is prone to losing control and skidding, especially on rainy days or uneven roads, which increases the likelihood of accidents. I've noticed during exams that examiners closely monitor speed—exceeding the limit results in immediate point deductions. Keeping the speed below 15 km/h reduces engine strain and ensures a smooth transition to second gear. The same applies to everyday driving; beginners often overlook speed limits, but developing good habits can prevent accidents. Practicing at lower speeds helps familiarize oneself with the feel of the car. Safety comes first—never underestimate this small detail.

Was this review help?
10
4
Share
Expand All
More Forum Discussions

What does the yellow filled marking on the road mean?

Yellow filled markings on the road are obstacle approach markings. Here is the relevant information: 1. Obstacle approach markings: Indicate the presence of fixed obstacles on the road surface, warning vehicle drivers to drive cautiously and guiding traffic flow smoothly away from the obstacle area. 2. White dashed lines in the middle of the road: These are center lines that can be crossed within the same direction lane, meaning that on such roads, motor vehicles are allowed to cross lanes without penalty. When driving on the road, motor vehicles must pay attention that neither solid white lines nor solid yellow lines are allowed to be crossed; only dashed lines can be crossed.
16
3
Share

Is a 1.4L engine displacement too small?

1.4L car engine power can meet the needs of daily household use and urban commuting. For highway driving, it depends on the vehicle size. For example, compact cars like the POLO can handle highway driving without issues, but for A-segment or larger vehicles, it's advisable to choose a car with a larger displacement. Here is additional information: Meaning of 1.4T: 1.4T essentially refers to a 1.4L naturally aspirated engine equipped with a turbocharger. The displacement is still considered 1.4L, but the power output becomes significantly stronger. Generally, turbocharged engines can achieve power levels equivalent to 1.3-1.5 times their displacement in naturally aspirated engines. Therefore, it can be simply stated that a 1.4T engine is comparable to a naturally aspirated engine with 1.8-2.0L displacement.
19
4
Share

Why Doesn't the Manual Gear Shift Lever Return to the Middle Position?

Manual gear shift lever not returning to the middle position may be due to a damaged or weakened return spring. Here is some relevant information: 1. Manual Transmission: A manual transmission car refers to a vehicle that uses a manual shift mechanical transmission (also known as manual gear, MT) to adjust speed. That is, the gear lever must be manually moved to change the gear meshing position inside the transmission, altering the gear ratio to achieve speed change. The gear lever can only be moved when the clutch is depressed. 2. Manual Gearbox: The manual gearbox has a simple structure, reliable performance, low manufacturing and maintenance costs, and high transmission efficiency (theoretically more fuel-efficient). Additionally, due to pure mechanical control, it offers faster shifting response and more directly reflects the driver's intentions, thus providing more driving pleasure.
15
3
Share

Do You Need to Turn Off the Engine and Get Out of the Car When Refueling?

When refueling a car, it is necessary to turn off the engine, but getting out of the car is not mandatory. Here is the relevant information: 1. Reason: When the engine is running, the vehicle's circuits and electrical systems are powered, with current flowing. If a short circuit or leakage occurs at this time, it can easily cause a fire. 2. Precautions: During refueling, the concentration of oil-gas mixture around the fuel tank increases accordingly. Since the density of this mixture is greater than that of air, when the oil vapor concentration reaches a certain level, any spark generated by the running car engine could ignite and explode it.
2
0
Share

What is the difference between Castrol Edge Professional and Castrol Edge?

The differences between Castrol Edge Professional and Castrol Edge are as follows: 1. Different nature: The official product line of Castrol engine oil is Edge-Magnatec-GTX-Gold-Super, from left to right, the level decreases. On the official website, only Edge is labeled as fully synthetic oil, Magnatec is labeled as synthetic oil on the official website, but it is actually what is commonly referred to as semi-synthetic oil. The rest, starting from GTX, are mineral oils. 2. Different characteristics: Professional is the result of Castrol's cooperation with car manufacturers, not sold to the public, only used in 4S maintenance. There are many manufacturers cooperating with Castrol, but not all Edge Professional products are of the same quality. Ordinary Edge can be used by everyone.
14
3
Share

Is it troublesome to add ACC when cruise control is already installed?

It is not troublesome to add ACC when cruise control is already installed. Additional information: 1. Adaptive Cruise Control: Adaptive cruise control uses computer and radar to adjust the distance between vehicles. If the distance is too close, it automatically brakes and reduces power; if the distance is too long, it accelerates automatically, maintaining the set distance and speed. 2. More Fuel-Efficient: Cruise control maintains a constant speed, which is more fuel-efficient. Basically, there is no need to press the accelerator. Given the technological content and positioning of adaptive cruise control, it is naturally not available in low-end cars and is typically found in mid-range cars at the very least. 3. Principle of Cruise Control System: The principle of the cruise control system mainly involves the cruise control component reading the pulse signal from the speed sensor and comparing it with the set speed. Through precise electronic calculations, it issues commands to ensure the most accurate fuel supply at the set speed.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.