What is the maximum speed for motor vehicles driving on icy and snowy roads?

2 Answers
VanNadia
07/28/25 10:33pm
Motor vehicles driving on icy and snowy roads have a maximum speed limit of 30 kilometers per hour. The following is relevant information about road traffic regulations: 1. Regulation: Article 46 of the "Implementation Regulations of the Road Traffic Safety Law" stipulates that when driving on icy or muddy roads, the maximum speed of motor vehicles shall not exceed 30 kilometers per hour. 2. Hazards of speeding: When speeding, drivers cannot fully and accurately perceive changes inside and outside the vehicle. For example, when a car is traveling at 50 kilometers per hour, it advances 1.39 meters in 0.1 seconds, with objects outside the window passing by in a flash. However, it takes 0.4 seconds for a person to sense a target within their field of vision and an average of 1 second to clearly see an object. If the speed is too high, it becomes impossible to obtain sufficient road information, increasing the risk of traffic accidents.
Was this review help?
10
4
Share
DeKira
08/12/25 3:03am
I still remember driving on icy roads when I was younger, where the top speed rarely exceeded 30 km/h. The road conditions were terrible back then, and vehicles lacked anti-skid systems, making it easy to slip if you went too fast. Once, I was driving at 25 km/h on a frozen slope and still nearly slid sideways—fortunately, I managed to steady the steering wheel. Nowadays, the recommendations are even stricter, with many local regulations limiting speeds to 20-30 km/h; in northern mountainous areas, it might be even lower. The key is to adjust according to the snow depth, avoid sudden braking or acceleration, and double the following distance. In bad weather, it’s best to check maps or apps for real-time road conditions—safety first saves trouble later. Driving slowly not only saves lives but also lets you enjoy the snowy scenery outside the window.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

How to Turn Off the Car Air Conditioner?

Methods to turn off the car air conditioner: 1. Turn the OFF knob and set the temperature to the lowest; 2. Press the wind speed decrease button to set the wind speed to the lowest; 3. If there is no wind speed level displayed on the screen, the air conditioner has been successfully turned off. If you only want to turn off the cooling function while keeping the fan on, simply press the AC button to turn it off. If you want the car air conditioner to provide heating in winter, first switch the cooling/heating conversion switch to the heating zone, then turn on the fan switch and adjust the wind speed to the desired level. The car air conditioner is a ventilation device designed to regulate and control the temperature, humidity, air cleanliness, and air flow inside the car cabin to the optimal state, providing a comfortable riding environment for passengers, reducing travel fatigue, creating good working conditions for the driver, and playing an important role in ensuring safe driving.
6
5
Share

What is the difference between Mercedes-Benz S300 and S350?

The differences between the Mercedes-Benz S300 and S350 lie in their engine displacement, with specific details as follows: 1. S350: Engine displacement is 3.5L, producing 272 horsepower, with a top speed of 250 km/h. 2. S300: Engine displacement is 3.0L, producing 231 horsepower, with a top speed of 245 km/h. Relevant information about the Mercedes-Benz S-Class includes: 1. Mercedes-Benz S-Class: It is the top-tier luxury car launched by Mercedes-Benz, a brand under the German Daimler Group. 2. Features: Equipped with the latest V12 twin-turbo engine; additionally, it is fitted with the cutting-edge PRE-SAFE active safety protection system, pioneering the "real-world safety concept" that can anticipate dangers and immediately take preventive measures.
17
4
Share

How to Configure a Car Remote Key?

Remote key utilizes the wireless remote control function of the central locking system, allowing you to unlock and lock the doors from a distance without inserting the key into the keyhole. Its greatest advantage is that regardless of day or night, you can conveniently unlock and lock the car remotely without needing to locate the keyhole. The remote key controls the device via radio waves, commonly used for smart door locks. The configuration steps are as follows: 1. Insert one key and turn the switch on; the security light will illuminate for ten minutes. Within the time before the security light turns off, turn the ignition switch off and then on again; the warning light will illuminate for approximately ten minutes. 2. Turn the switch off, then turn it on again; the security light will illuminate for ten minutes. Within the time before the security light turns off, turn the ignition switch off and then on again; the warning light will illuminate for approximately ten minutes. 3. Match the 'code' with the car; once the new key is successfully matched, it can be used, while the old key will no longer function.
20
3
Share

How to Use One-Touch Power Window?

The method to operate one-touch power windows is as follows: 1. Cars equipped with one-touch power windows have two-stage window control switches. The first stage works like regular power windows - you need to hold the switch until the window reaches the desired position. The second stage requires just a single press and release to automatically fully open or close the window; 2. Different car models may have different one-touch window indicators, most currently use the "Auto" English label. Some simply call it the "one-touch lock button" - the principle is the same: long-press the lock button to raise all windows simultaneously, or long-press the unlock button to lower all windows; 3. One-touch power windows generally feature an "anti-pinch" function. During automatic closing, if any object is detected between the glass and window frame, the window will automatically stop and return to its initial position to prevent potential pinching hazards.
9
2
Share

What items are included in the Envision's first maintenance?

The first maintenance items for the Envision include: 1. Changing the engine oil and oil filter; 2. Inspecting the operation of the braking system, such as the gap and wear of brake pads and discs; 3. Checking the bolts of various systems; 4. Inspecting and adjusting the drive belt; 5. Inspecting and adjusting tire balance and alignment; 6. Checking and replenishing various fluids; 7. Inspecting the operation of components such as lights, battery, and shock absorbers. The Envision is positioned as a midsize SUV. In terms of appearance, the Buick Envision features a newly designed intelligent drag-reducing grille, aluminum roof rails, newly styled chrome dual exhaust pipes, 19-inch multi-spoke aluminum alloy wheels, and a multi-function exterior rearview mirror. Regarding body dimensions, the Envision measures 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm.
20
5
Share

What are the differences between Xiangling M1 and M2?

Xiangling M1 and M2 differ in terms of the cargo compartment and wheelbase. Below is a detailed introduction to the differences between the two models: Differences in the cargo compartment: For the M1 model, the cargo compartment is 3.05 meters long, 1.61 meters wide, and 1.7 meters high. In terms of overall dimensions, the length, width, and height are 5230/1750/2580 mm, with a wheelbase of 2750 mm. For the M2 model, the cargo compartment is 3.1 meters long, 1.71 meters wide, and 1.7 meters high. In terms of overall dimensions, the length, width, and height are 5280/1850/2590 mm, with a wheelbase of 2850 mm. Differences in wheel track: The front wheel track of the M1 is 1320 mm, and the rear wheel track is 1280 mm. The front wheel track of the M2 is 1410 mm, and the rear wheel track is 1320 mm.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.