What is the maximum speed and longest driving distance for a temporary spare tire?

Does Modifying the Grille Affect Car Resale?

Modifying the grille has minimal impact. Function of the car grille: The primary function of the car grille is to allow air intake for the radiator, engine, air conditioning, etc. In automotive engineering, the grille is used to cover the body to facilitate air entry. Most vehicles have a front grille, commonly located below the front bumper, in front of the wheels, or at the front for cabin ventilation, or on the rear trunk lid—these are mostly expressions of personalization. Grille locations: Common grille locations include below the front bumper, in front of the wheels (to cool brakes), at the front for cabin ventilation, or on the rear trunk lid (mainly for rear-engine vehicles). The grille often serves as a distinctive styling element, with many brands using it as a primary brand identifier.

12

5

Share

How many liters of coolant are needed for a Heyue coolant replacement?

Heyue coolant replacement requires 4-6 liters. The full name of coolant should be antifreeze coolant, meaning a coolant with antifreeze function. Coolant can prevent the coolant from freezing and cracking the radiator or freezing the engine cylinder block or cover when parking in cold winter. Coolant replacement method: Before completely replacing the coolant, a comprehensive inspection should be conducted to check for any signs of leakage or cracks in each pipeline, with a focus on the five-way water pipe. The five-way pipe is named because it has five interfaces connecting various parts. The coolant is distributed to different parts of the car after flowing through the five-way pipe to function. If there is any leakage of coolant in this part, the water pipe should be replaced or the interface should be re-fixed according to the situation. Drain the old coolant, then clean the liquid channels with clean water. Add clean water to the coolant replenishment tank, then continuously inject clean water into the tank so that it flows through the engine cooling system. Subsequently, start the car and let it idle for 3 to 5 minutes to circulate the water. The water flowing out of the tank initially will be slightly pinkish. Continue injecting clean water until clean water flows out. Note that do not forget to remove the heater water pipe and drain the water from the heater core. After about 1 hour of draining, add the new coolant through the radiator hose, which is a method to allow the coolant to flow quickly into the radiator. Then add another bucket of coolant to the coolant tank until it is almost full. Start the car for about 10 minutes. At this time, the liquid level will drop slightly due to the removal of some air from the cooling system. Add more coolant until the "MAXT" mark on the storage tank is reached.

16

4

Share

Is it allowed to change lanes to the right?

It is allowed to change lanes to the right. Techniques for changing lanes to the right: One light, two mirrors, three steering. First, you must turn on the turn signal before changing lanes; second, observe the vehicles ahead and behind to ensure a safe distance; third, steer gently and change lanes quickly. If you want to change lanes, you must turn on the turn signal at least three seconds in advance to alert other vehicles. Before changing lanes, observe and judge through the interior and exterior rearview mirrors, checking the traffic conditions behind, beside, and in the lane you intend to change into. Sign for changing lanes to the right: All vehicles must turn right only; this sign is generally placed at intersections where vehicles must turn right.

1

5

Share

What are the reasons for the Caterpillar 336's inability to brake during rotation?

Caterpillar 336's inability to brake during rotation can be attributed to the following reasons: Air in the brake line: Brake fluid serves as the medium for the brake system's transmission. If there is air in the brake line, the brake fluid under high pressure will appear insufficient in force. Although there is still braking force, it is significantly weakened. In this case, the brake system should be promptly bled at a repair shop. Brake fluid not replaced for a long time: Brake fluid has strong hygroscopic properties and easily absorbs moisture from the air. If not replaced in time, it will contain excessive impurities and moisture, which will affect the transmission of braking force. Oil leakage or overly soft brake material: Generally, oil leakage from the brake master cylinder or brake line will cause the vehicle's brakes to become soft. Additionally, if the brake material is too soft, its high-temperature stability will deteriorate, similarly resulting in soft brakes.

12

3

Share

How big is an XL helmet?

Helmet XL is an extra-large size. Common misconceptions about helmet usage: The lighter the helmet, the better. Relatively speaking, helmets are better when lighter. However, the lighter the cycling helmet, the less likely it is to pass the national safety certification test standards. The larger or more numerous the vents on the helmet, the more ventilated it is. Ventilation is a key feature of helmets, ensuring head dryness during long-distance rides. The more or larger the vents on the helmet, the greater the airflow around the head, making it feel cooler. However, it is important to remember that the more or larger the vents on the helmet, the more the head is exposed, thus reducing the level of protection accordingly. Helmets that are cracked or used beyond their expiration date. Purpose of helmets: Helmets are mostly semicircular in shape, mainly composed of three parts: the shell, lining, and suspension system. The shell is made of materials such as special steel, fiberglass, reinforced plastic, leather, and nylon to protect the head from injuries caused by accidents. In ancient China, helmets were referred to as 'zhou', 'shoukai', 'doumou', or 'toumou'.

19

0

Share

Is the owner required for changing the color on the vehicle license?

Changing the color on the vehicle license requires the owner's identification documents. Preparation work: 1. Prepare required materials: The procedure for color change requires few materials - the vehicle license, the owner's ID card, and the vehicle registration certificate (green book). If a friend is handling it as an agent, the agent's ID card must also be brought. 2. Keep the car body clean: Since the vehicle license will be changed, photos and appearance checks will be conducted before processing, similar to the appearance inspection during vehicle testing. Therefore, keeping the car body clean is important, and it is recommended to wash the car in advance. 3. Clear traffic violations in advance: Similar to regular annual inspections, vehicle information and traffic violation records will be verified. Thus, clearing any violations beforehand is essential and should not be forgotten. Application steps: 1. Appearance inspection: The process is the same as for annual inspections, including stamping, taking photos. Any modifications to the appearance that fail the inspection must be restored to the original factory condition beforehand. 2. Fill out the application form: The service hall has a color change application form. After completing it, submit it to the processing window for review and to receive a new vehicle license. 3. Issuance and fee payment: Normally, the new vehicle license can be processed successfully in about half an hour, with only a small fee for the production cost required. Once paid, the entire procedure is completed.

15

1

Share

What is the maximum speed and longest driving distance for a temporary spare tire?

Does Modifying the Grille Affect Car Resale?

How many liters of coolant are needed for a Heyue coolant replacement?

Is it allowed to change lanes to the right?

What are the reasons for the Caterpillar 336's inability to brake during rotation?

How big is an XL helmet?

Is the owner required for changing the color on the vehicle license?

What is the weight of a 12-horsepower walking tractor?

Does the owner need to accompany the vehicle when towing it to a 4S shop?

Is It Necessary to Replace the Trunk If It's Been Hit?

Does lending a driver's license to a friend for point deduction affect the license owner?