What is the maximum number of points that can be deducted from a driving license?

2 Answers
DeNadia
07/28/25 8:54pm
National regulations stipulate that a maximum of 12 points can be deducted from a driving license, with a yearly reset. Here is the relevant information: Points Deduction: If less than 12 points are deducted within a year, the points will be reset to zero on the date of license issuance. If 12 points are already deducted within a year, the driver must undergo training and pass an examination before the points can be reset to zero. Definition: The full name of a driving license is a motor vehicle driving license, also known as a "driver's license," which is a legally required certification for motor vehicle drivers. Main Classifications: The National Ministry of Public Security has further subdivided the previous three types of driving permits (A, B, and C) into seven types, while canceling the Q permit.
Was this review help?
6
3
Share
DelZoey
08/12/25 1:37am
I just got my driver's license a few months ago and have been thinking about the demerit point limit. The maximum number of points you can lose in a year is 12, and if you exceed that, you'll have to attend safety education and pass a test before you can drive again. I'm quite nervous because new drivers often make mistakes—like speeding over 30% (6 points), running a red light (6 points), or drunk driving (12 points straight). Once you max out your points, the risks of driving increase significantly, and your license could be suspended, affecting your daily commute and work. I always pay extra attention to speed limits and use my phone for navigation to avoid violations. A friend reminded me to develop good habits to prevent sudden disruptions from mandatory courses. Remember, points accumulate—every violation adds up, so safe driving is the only way to keep your points intact.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

Should You Shift to Neutral at a Red Light with a Dual-Clutch Transmission?

When waiting at a red light, vehicles equipped with a dual-clutch transmission do not need to shift to neutral. Introduction: A dual-clutch transmission (DCT) differs from conventional automatic transmission systems. It combines the characteristics of both manual and automatic transmissions, offering the flexibility of a manual transmission and the comfort of an automatic transmission, while also providing uninterrupted power output. Working Principle: The dual-clutch automatic transmission (DCT) is based on the structure of a manual transmission. However, unlike a manual transmission, the DCT features two clutches connected to two input shafts. Gear shifting and clutch operations are controlled by an integrated electro-hydraulic mechanical module, eliminating the need for a clutch pedal. Similar to a tiptronic hydraulic automatic transmission, the driver can manually shift gears or leave the gear lever in fully automatic D mode (comfort mode, shifting at low engine speeds) or S mode (sport mode, shifting at high engine speeds). In this mode, gear shifts are typically executed by gear and clutch actuators. The two clutches are each connected to different input shafts. For example, if clutch 1 is linked to gear 5 via a solid shaft, clutch 2 is connected to gears 4, 6, and reverse via a hollow shaft.
14
3
Share

Audi A8 Sunroof Button Malfunction

Audi A8 sunroof button malfunction: 1. The electric sunroof switch may fail due to a minor program issue with the sunroof control button. Performing an initialization of the sunroof control button can resolve this. 2. The initialization procedure is as follows: Turn on the ignition switch and ensure the car sunroof is fully closed. If the sunroof cannot be closed normally, you can use the electrical force-closing method (press and hold the marked end of the switch while it is in the closed position) or the mechanical force-closing method (use the crank on the decorative cover to manually close the sunroof motor). Press the sliding switch or tilt switch and operate the sunroof in the following sequence: tilt up → hold for about 1s → tilt down → slide open → slide close. The initialization is then complete. 3. After the setup, verification is required. Check if the sliding sunroof has the auto open/close function and the anti-pinch function. Engage the parking brake and close the sliding sunroof. Press and hold the "UNLOCK" button on the remote for more than 2.4s to check if the sunroof opens automatically. After opening, press and hold the "LOCK" button for more than 2.4s to check if the sunroof closes automatically. If the above checks fail, reinitialize the sliding sunroof.
20
0
Share

Is ETC Required for Highway Access?

Highway access is possible without ETC. Because ETC is not mandatory for installation. Since January 1, 2020, vehicles without ETC will no longer enjoy various toll reduction policies and can only pay tolls through manual lanes at toll stations. It may be somewhat inconvenient during holidays. ETC is just a different toll collection method and has no bearing on whether a vehicle can access the highway. There are two toll collection methods on highways: manual toll collection and ETC toll collection. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply, you need to provide the original and photocopies of the vehicle owner's valid ID card and vehicle registration certificate. If the application is not made by the owner, a valid ID card of the agent is also required. The photocopy of the vehicle registration certificate should include the page with the latest annual inspection stamp; a bank card for deducting highway tolls; the applicant must be between 18 and 60 years old; and the vehicle must be registered under an individual's name. How ETC works: Through the on-board electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at the toll station. Using computer networking technology, it settles accounts with the bank in the background, allowing vehicles to pay highway or bridge tolls without stopping when passing through toll stations. Benefits of installing ETC: Saves time: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and pollution; Reduces wear and tear: Saves costs by decreasing the frequency of vehicle starts and stops, reducing wear and fuel consumption, and users can enjoy toll discounts; Improves efficiency: The efficiency of ETC lanes can theoretically be increased by 2-3 times or more, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
18
0
Share

What is the sequence for adding a driver's license category?

Driver's license category addition sequence is as follows: Subject 1 (Theory). Subject 2 (Vehicle Driving) includes: right-angle turns, parallel parking, hill start, reverse parking, S-curve driving. Subject 3 (Road Test) includes: simulated lighting operation, traffic light intersection passage, 100-meter gear shifting, straight-line driving, parking, test completion. Subject 4 (Civilized Driving Theory). Relevant laws and regulations for driver's licenses: Article 40 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" states: For initial application of a motor vehicle driver's license or application to add a permitted driving category, the applicant must schedule the Subject 2 test. Driver's license application requirements: To add category B1 license: Original permitted categories must be C1, C2, C3, or C4 with minimum 3 years driving experience and no full-point penalty records in the last 2 scoring cycles. To add A2 license: Original permitted categories must be B1 or B2 with minimum 3 years driving experience and no full-point penalty records in the last 2 scoring cycles. To add A2 license from A1: Requires 1 year driving experience with no full-point penalty records in the last scoring cycle.
14
5
Share

What does traffic violation code 1358 mean?

Violation code 1358 means: Failing to yield to pedestrians crossing the road when driving on roads without traffic signals. According to Article 47 of the Road Traffic Safety Law of the People's Republic of China: When motor vehicles pass through crosswalks, they should slow down; when encountering pedestrians crossing the crosswalk, they should stop and yield. When motor vehicles drive on roads without traffic signals, they should yield to pedestrians crossing the road. Traffic violation codes consist of four to five digits, classified according to the principles of the traffic law. The order from left to right is: the first digit represents the behavior classification code, the second digit represents the penalty point classification code, the third and fourth digits are sequential numbers, and the fifth digit indicates the specific item number. First digit: Behavior classification code, indicating the category in the Road Traffic Law; Second digit: Penalty point classification code, indicating the penalty points for the traffic violation; Third and fourth digits: Sequential code, indicating the order of the violation within the same behavior category. For example: 13035 - "1" indicates motor vehicle behavior, the second digit "3" means 3 penalty points, and "035" indicates the fifth item of the third violation under the 3-point penalty category. Behavior classification code violation descriptions: Codes starting with 1 indicate motor vehicle traffic, e.g., 1003; Codes starting with 2 indicate non-motor vehicle traffic, e.g., 2002; Codes starting with 3 indicate pedestrian or passenger traffic, e.g., 3030; Codes starting with 4 indicate highway traffic, e.g., 4002; Codes starting with 5 indicate other regulations, e.g., 5005; Codes starting with 7 indicate provincial, autonomous region, or municipal implementation rules, e.g., 7008; Codes starting with 8 indicate local regulations of cities (regions, autonomous prefectures, or leagues), e.g., 8606. There are four common ways to check motor vehicle violations: Visit the office halls of traffic departments in various districts and counties to inquire through touch-screen terminals; Log in to the public service website of the local public security traffic management bureau, find the vehicle violation inquiry section, enter the license plate number and engine number, and click "Query"; Call the inquiry hotline (area code + 114); Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to inquire.
19
5
Share

What car has a logo featuring a cross and a snake?

A logo featuring a cross and a snake belongs to Alfa Romeo from Italy. The main models Alfa Romeo sells in China are the following two: First: the mid-size sports sedan Giulia. Second: the luxury sports SUV Stelvio. Here is some additional information about this brand: Alfa Romeo has many fans worldwide because the sports cars it manufactures have elegant appearances, powerful performance, and engines that produce very pleasant sounds. In its early days, Alfa Romeo was also a famous racing car manufacturer, having launched many high-performance racing cars that competed and achieved glorious results on the track.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.