···
Log in / Register

What is the maximum load capacity of the Boyue?

6Answers
KathrynDella
08/31/2025, 01:45:53 AM

The maximum load capacity of the Geely Boyue is 2045 kilograms. Below is the relevant content introduction: 1. The curb weight of the Geely Boyue: The weight of the four-wheel-drive model is 1745 kilograms; the weight of the 2.0L manual transmission model is 1565 kilograms. 2. The Boyue is a compact SUV under Geely. The dimensions of this car are 4519 mm in length, 1831 mm in width, and 1694 mm in height, with a wheelbase of 2670 mm. 3. The Geely Boyue is equipped with two engines: one is a 2.0-liter naturally aspirated engine, and the other is a 1.8-liter turbocharged engine. The maximum power of the 1.8-liter turbocharged engine is 135 kilowatts, with a maximum torque of 300 Newton-meters; the maximum power of the 2.0-liter naturally aspirated engine is 104 kilowatts, with a maximum torque of 178 Newton-meters.

Was this review help?
101
Share
ElleLee
09/12/2025, 10:13:29 PM

As a long-time car enthusiast, let me talk about the maximum load capacity of the Boyue. The official data is usually around 500 kilograms, but the exact figure should be checked in the vehicle manual or on the nameplate, as there can be significant differences between models from different years. I've driven the Boyue myself, and for daily use with family and luggage, keeping it under 300 kilograms feels safest. Overloading poses serious risks—suspension can deform, tire wear accelerates, and even braking distance increases. If you hit the road fully loaded, the car's vibrations become noticeably worse, affecting the driving experience. I recommend weighing your luggage before each trip to avoid stacking it too high and destabilizing the center of gravity. During regular maintenance, have the technician check the load markings to prevent unexpected failures. Safety comes first—don’t underestimate this small detail.

Was this review help?
6
Share
Expand All
Frieda
10/26/2025, 11:01:08 PM

Hey buddy, I've been driving SUVs for years, and the load capacity of the Boyue reminds me of that family trip. It's rated for a maximum of around 500 kg, but in practice, I find 450 kg is more than enough. Any more and the front gets too heavy, making it prone to swaying when turning. Overloading not only wastes fuel but also wears out the suspension faster and increases the risk of tire blowouts. Traffic regulations have limits, so don't risk overloading. Daily tip: reduce luggage when carrying more passengers, and don't stuff the trunk full. For maintenance, regularly replacing the shock absorbers helps maintain load capacity. In short, the Boyue is pretty tough, but using it wisely ensures safety and peace of mind.

Was this review help?
5
Share
Expand All
SanTimothy
12/09/2025, 10:16:37 PM

I have been driving the Bora for four years, and according to the manual, the maximum load capacity is 400-500 kg. Overloading risks include suspension deformation, reduced braking efficiency, and increased accident probability. Traffic regulations prohibit overloading, otherwise fines will be imposed. When loading, balance the weight distribution and it is recommended to carry less each time. Regularly checking the wheels and tire pressure can prevent problems. Safety is the most important.

Was this review help?
2
Share
Expand All
MacMatthew
01/29/2026, 11:25:45 PM

As an experienced driver, I'm quite familiar with the carrying capacity of the Boyue. Its maximum load capacity is around 500kg, as officially stated. I remember last year when moving house, I loaded it to the limit but kept it under control, and the car remained stable without any swaying. However, long-term full loading puts a heavy burden on the engine, and fuel consumption will skyrocket. In daily use, avoid frequently stacking heavy items and leave some space in the trunk. During maintenance, check the suspension and tire pressure to extend the car's lifespan. In short, reasonable loading makes driving more comfortable.

Was this review help?
10
Share
Expand All
VonColton
04/24/2026, 05:36:21 PM

From a vehicle maintenance perspective, I emphasize keeping the maximum load of the Boyue within 500 kg. Overloading can accelerate suspension system aging, damage shock absorbers, and lead to high repair costs. In practical use, it's advisable to distribute luggage evenly and avoid excessive weight on one side. The Boyue is designed for family use, but exceeding limits may cause braking issues. Regular monitoring of tires and pressure during daily driving can prevent accidents. Schedule periodic services to have experts assess load capacity and maintain safe conditions. With proper use, your car can accompany you for a long time.

Was this review help?
18
Share
Expand All
More Q&A

What Causes the Engine Warning Light to Illuminate in a Jaguar XEL?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor contact, or signal interruption occurs, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel/oil quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor fuel mixture combustion: Incomplete combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Spark plug failure, ignition coil malfunction, fuel pump issues, or fuel line blockages can all result in poor combustion. Turbocharging problems: Issues with the intake boost piping or turbocharger can also trigger the engine light. The most common is turbocharger damage, often accompanied by oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: Air intake issues may lead to engine pipe blockages, potentially causing the warning light to activate. A dirty or uncleaned air filter can restrict proper airflow. Exhaust system faults: Exhaust problems can trigger the engine light. Common causes include rear oxygen sensor failure, catalytic converter issues, or exhaust camshaft and bearing failures. Using leaded gasoline, improper lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions may damage this component. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or doesn't properly communicate with the engine control unit, it may prevent normal engine operation while illuminating the warning light. When the engine warning light appears, follow these steps: First check if the engine operates normally - observe for vibrations, black smoke, etc. If present, avoid restarting the engine. Note: Never restart if the light is red. If the engine starts normally, turn off the vehicle for 5-10 minutes. Without pressing the brake pedal, press the start button once or turn the key halfway to the ON position (without engaging the clutch). The system will perform a self-check - observe if the warning light turns off after 5-10 seconds. If the light remains on, visit a service center immediately. Technicians can use diagnostic tools to retrieve trouble codes and perform targeted repairs.
116
Share

Is There Any Impact from Switching from 95 Octane to 92 Octane Fuel Long-Term?

Switching from 95 octane to 92 octane fuel long-term does have an impact. Occasionally using the wrong gasoline grade only requires switching back to the correct grade after consumption, but long-term use of the wrong gasoline grade can lead to the following effects: For vehicles designed for lower octane fuel, using higher octane fuel will not cause damage, but the increase in octane rating alters the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, with the practical experience being poorer performance. For vehicles designed for higher octane fuel, using lower octane fuel can cause engine knocking. Because the octane rating is significantly lower, the reduced ignition point causes premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is imperceptible, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring. In addition to checking the appropriate gasoline grade in the vehicle's manual, you can also find it on the fuel tank cap. Generally, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane fuel, while those with a compression ratio between 10.0-11.5 should use 95 octane fuel. However, with the use of new technologies, the compression ratio alone cannot determine the required gasoline grade. High compression ratio engines can be tuned to use lower octane fuel because other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane rating and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane.
108
Share

What are the hidden functions of the 2011 Teana key?

The hidden functions of the 2011 Teana key include closing the windows after turning off the engine, finding the car in a parking lot, automatically opening the trunk, and remotely opening the windows. Relevant information about the Teana is as follows: 1. Exterior Design: The 2021 Teana newly introduced red-black and white-black dual-color exteriors. Except for the entry-level 2.0L model, all models are equipped with 17-inch or larger wheels, LED headlights, and LED daytime running lights. Additionally, the model also launched the Phantom Edition package, which includes blackened rear emblems, chrome front grille trim, wheels, rear spoiler, Midnight personalized rear emblem, and other unique exterior accessories. 2. Interior Design: The 2021 Teana upgrade features piano-black door trim panels, wood-grain center console and gear lever box, and exquisite soft material wrapping to enhance the cabin's luxury feel. Moreover, the Phantom Edition package also includes luxury LED welcome pedals and exclusive floor mats. 3. Powertrain: The 2021 Teana offers a 2.0L naturally aspirated engine and a 2.0T turbocharged engine, paired with the new intelligent XTRONIC-CVT continuously variable transmission equivalent to an 8AT gear range. The 2.0T model is equipped with the VC-TURBO variable compression ratio turbocharged engine, which allows the engine compression ratio to intelligently and continuously switch between 8:1 (high performance) and 14:1 (high efficiency). The 2021 Teana can accelerate from 0 to 100 km/h in just 6.42 seconds, with a minimum fuel consumption of 6.6L per 100 km.
119
Share

Should the car be started when charging a phone inside?

Starting the car is necessary when charging a phone inside. Here are the precautions for starting a car: 1. Check the surroundings of the vehicle: Walk around the car to inspect its exterior and the environment, ensuring there are no obstacles in front or behind the car. Check the ground where the car is parked for any suspicious oil stains or water stains, verify if the front and rear light assemblies are damaged, and ensure the tire pressure is adequate. 2. Inspect the internal condition of the car: Check if the engine oil and coolant levels are sufficient, and if the front and rear lights, signal lights, and dashboard are functioning properly. The main focus is to examine the technical condition inside the car. Lift the engine hood, pull out the dipstick to check if the oil level is normal, and unscrew the radiator cap to verify if the water level is normal.
112
Share

What is the method to reset the maintenance light on Changan Suzuki?

Turn on the ignition switch, briefly press the right-side information display selection handle until the information display screen goes black and then stops. Press and hold the left-side mileage button for more than 5 seconds until the oil lock display appears on the screen, then release the button. The display area will show the oil lock. Release the button and press it five times consecutively within 2 seconds, completing the action within 3 seconds. The oil lock will turn off, indicating the operation is complete.
115
Share

Why does the car key not respond when locking the car?

If the car key does not respond when locking the car, it may be due to a malfunction of the remote lock or aging of the remote transmitter antenna in the vehicle, which prevents the remote key from working properly. Another possible cause is strong magnetic signal interference around the car. Here are some precautions for car keys: 1. Do not place it near electronic devices: Since smart keys use low-intensity radio waves, they may not function properly under magnetic interference. Frequently placing the smart car key together with a mobile phone can lead to malfunction, as the chip inside the smart key may sometimes be affected by the phone's frequency, temporarily disabling the remote function. Additionally, if the smart key receives high-intensity radio waves, it may excessively drain the battery. Therefore, avoid placing the smart key near electronic devices such as TVs or personal computers. 2. Avoid rough handling: Smart keys are most vulnerable to being dropped from a height. While the outer shell of most smart keys is sturdy, the internal circuitry is less resistant to impact and can easily be damaged by severe collisions. Furthermore, if water enters the smart car key, it can burn out the internal circuitry, also causing remote failure. If the smart car key gets wet, do not shake it vigorously, as this can cause water to spread to other critical circuits. Also, avoid using the remote to unlock the car immediately, as this may damage the circuit board. 3. Use the correct battery: The battery life of a smart car key is approximately one year. Battery consumption varies depending on the frequency and distance of key usage. Replacing the battery of a smart car key requires caution, as any mistake can damage the circuit board inside the key. Before replacement, the owner should carefully review the battery replacement diagram. When disassembling the key, pay attention to the original positions of all components and try to use an original battery. During installation, ensure the correct orientation of the battery's positive and negative terminals to avoid incorrect placement. Additionally, be careful with the sealing ring at the bottom of the key to prevent damage during replacement, which could otherwise burn out the circuit board.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.