What is the maximum load capacity of a 750 vacuum tire?

Is Reverse Gear the R Gear?

Reverse gear is indeed the R gear, whether in manual transmission or automatic transmission vehicles. In manual transmissions, the gears are typically divided into 1st gear, 2nd gear, 3rd gear, 4th gear, 5th gear, and R gear, where gears 1 through 5 are forward gears, and R is the reverse gear. Some models now come with a 6th gear. Generally, in manual transmissions, 1st gear is at the top left, 2nd gear at the bottom left, 3rd gear at the upper middle, 4th gear at the lower middle, 5th gear at the top right, and R gear at the bottom right, with the center position being neutral, which is the gear used when waiting at a red light or parking. In automatic transmissions: D gear is the drive gear, N gear is neutral, and R gear is the reverse gear. The reverse gear, fully known as the reverse driving gear, is one of the three standard gears in a car, marked as R on the gear console, designed to allow the vehicle to move backward, and is considered a special driving gear.

19

2

Share

Does Intake System Cleaning Include the Throttle Body?

Intake system includes: air filter, throttle body, intake manifold and fuel injector. The details of the intake system are as follows: 1. When the engine is running, the driver controls the throttle opening through the accelerator pedal to change the intake air volume and regulate engine operation. Air entering the engine first passes through the air filter to remove dust and other impurities, then flows through the air flow meter, enters the power chamber via the throttle passage, and is distributed to each cylinder through the intake manifold. During cold idle operation, some air bypasses the throttle body and enters the cylinder through the auxiliary air valve or idle control valve. 2. Intake system cleaning includes the throttle body. The main function of the intake system is to deliver clean, dry, sufficient and stable air to meet engine requirements, preventing impurities and large particles from entering the combustion chamber and causing abnormal engine wear. 3. Another important function of the intake system is noise reduction. Intake noise not only affects the vehicle's pass-by noise but also impacts cabin noise, significantly influencing ride comfort. Poor intake system design directly affects engine power and noise quality, which relates to the vehicle's overall ride comfort. Properly designed muffler components can reduce subsystem noise, thereby improving the vehicle's NVH performance.

11

3

Share

What to Do Immediately When a Tire Blows Out?

Here are the immediate actions to take when a tire blows out: 1. Stay calm first and foremost when a tire blows out. Grip the steering wheel firmly with both hands to maintain control of the vehicle's direction, trying to keep driving straight. Do not slam on the brakes or immediately release the accelerator. Instead, gradually ease off the accelerator pedal because a blown tire causes significant deceleration. You can use intermittent braking (pump the brakes rhythmically) to slowly bring the vehicle to a stop in a relatively safe location. 2. After stopping the vehicle, first turn on the hazard warning lights and place the warning triangle at an appropriate position on the approaching lane (250 meters at night on highways, 150 meters during daytime on highways, 50 meters during daytime on regular roads, and 150 meters at night on regular roads). This alerts approaching vehicles to be cautious and yield. Meanwhile, all passengers should exit the vehicle and move to a safe area to await assistance. After completing these steps, you can call for help or replace the spare tire yourself to drive to the nearest repair shop.

13

3

Share

Can Auto Start-Stop Technology Save Fuel?

Auto start-stop technology is relatively fuel-efficient. Here is a detailed introduction to auto start-stop technology: 1. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) during driving. When it's time to move forward again, the system automatically restarts the engine to continue driving. 2. The engine auto start-stop system is one of the most rapidly developing eco-friendly automotive technologies in recent years, especially suitable for stop-and-go urban driving conditions. This system can achieve up to 15% fuel savings in urban driving scenarios. The auto start-stop system is very convenient to use—during driving, simply press the brake pedal fully. After the vehicle comes to a complete stop for about two seconds, the engine will automatically shut off. As long as the brake pedal remains pressed, the engine will stay off. 3. Just release the brake or turn the steering wheel, and the engine will immediately restart automatically, allowing you to press the accelerator to start moving. The entire process usually remains in D gear. Direct injection engines are more suitable for this technology. Of course, when using a vehicle equipped with this feature, it's essential to use high-quality engine oil; otherwise, the system may not function effectively.

8

5

Share

What are the body dimensions of the BAIC Changhe Q35?

The BAIC Changhe Q35 has a body length of 4286mm, width of 1815mm, and height of 1665mm, with a wheelbase of 2560mm. Here are the detailed specifications of the BAIC Changhe Q35: 1. The BAIC Changhe Q35 is equipped with a 1.5-liter naturally aspirated engine coded A151 across all variants. This engine delivers a maximum power of 85kW and a maximum torque of 148Nm, with the maximum power achieved at 6000 rpm and the maximum torque at 3800 rpm. 2. The engine features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 4-speed automatic transmission (4AT). The AT transmission offers smoother gear shifts and better reliability and durability. 3. The BAIC Changhe Q35 uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear. Compact SUVs typically employ torsion beam rear suspensions due to their simple structure, compact size, and space efficiency. The use of a torsion beam rear suspension also helps to maximize rear passenger space and trunk capacity.

13

5

Share

What is the name of the Lavida hatchback?

Lavida's hatchback version is called Lavida XR. The following is an introduction to Lavida XR: 1. The front design of Lavida XR completely follows the design style of Lavida, with the only difference being the tail shape. 2. Gran Lavida XR surpasses not only in space but also in imagination for life. It is an elegant, high-quality hatchback with abundant space, offering unlimited possibilities for life. 3. Since hatchback cars also have an independent front engine compartment, like sedan cars, they have good frontal collision protection performance. Whether it is a standard type or a short-head type, it can meet the current frontal collision protection requirements.

18

1

Share

What is the maximum load capacity of a 750 vacuum tire?

Is Reverse Gear the R Gear?

Does Intake System Cleaning Include the Throttle Body?

What to Do Immediately When a Tire Blows Out?

Can Auto Start-Stop Technology Save Fuel?

What are the body dimensions of the BAIC Changhe Q35?

What is the name of the Lavida hatchback?

How to Add Windshield Washer Fluid to a Golf?

How to open the fuel tank on the 10th-generation Civic?

Is Tesla Shanghai a Joint Venture?

Is it better to install a roof rack on the RAV4 or not?