What is the maximum length of a truck that a C1 license holder can drive?

2 Answers
LaNova
07/29/25 4:20am
Driving a truck with a total length exceeding 6 meters is not allowed. Additionally, C1 license holders can drive small cars (manual transmission) and vehicles under categories C2 and C3, which include trucks with a gross vehicle weight rating (GVWR) of 1.99 tons or less and passenger vehicles with 9 seats or fewer. As long as the vehicle falls within these specifications, it is permissible to drive. The scope of a C1 driver's license covers small and mini passenger vehicles, as well as light and mini trucks; light, small, and mini special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. Vehicles that a C1 license holder cannot drive include: large buses, tractor units, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, mopeds, wheeled self-propelled machinery, trolleybuses, and trams. Furthermore, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.
Was this review help?
16
2
Share
DelCameron
08/12/25 8:03am
I did thorough research on this right after getting my C1 license. According to regulations, C1 license holders can drive blue-plate light trucks with total length under 6 meters and gross weight below 4.5 tons. Common single-cab trucks with about 4.2-meter cargo beds seen on roads are perfectly fine. Note that total length includes both front and rear - some extended cargo bed models may exceed limits. My neighbor bought a 5.8-meter refrigerated truck last year, which exactly hits the C1 upper limit.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What to do if you accidentally fill up with 92 octane instead of 95?

Occasionally filling up with 92 octane instead of 95 is not a big deal, but consistently using lower octane fuel in a high-performance vehicle can severely affect the engine's normal operation, leading to knocking. In serious cases, it may reduce the engine's lifespan and increase maintenance costs. The fundamental difference between 95 and 92 octane gasoline lies in their octane ratings, or more simply, the amount of anti-knock additives. 95 octane gasoline contains a slightly higher proportion of anti-knock additives compared to 92 octane. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from the fractional distillation, cracking, or pyrolysis of petroleum, used as fuel. Key characteristics of gasoline include volatility, stability, knock resistance, corrosiveness, and cleanliness.
14
2
Share

Can Gasoline Cars Use Diesel Engine Oil?

Gasoline cars cannot use diesel engine oil. Engine lubricating oils are categorized into gasoline engine oil and diesel engine oil. Although both gasoline and diesel engines operate under high temperature, high pressure, high speed, and high load conditions, there are significant differences between them. Diesel engines have a much higher compression ratio—more than twice that of gasoline engines—and their main components endure much greater high temperature, high pressure, and impact than gasoline engines, leading to differences in the materials used for some parts. Diesel engine oil formulations include additional anti-corrosion additives to form a protective film on bearing surfaces, reducing corrosion and enhancing wear resistance. Gasoline engine oil does not require such high anti-corrosion properties. If used in a diesel engine, the bearings may develop spots, pitting, or even flaking, and the oil will quickly become dirty, potentially leading to bearing seizure and shaft damage.
15
0
Share

Where is the car brake located?

Car brake position: For manual transmission cars, the leftmost pedal is the clutch pedal, the second pedal is the brake pedal, and the third pedal is the accelerator pedal; For automatic transmission cars, there is no clutch pedal. The left pedal of an automatic transmission car is the brake pedal, and the right pedal is the accelerator pedal. When the driver presses the brake pedal, the braking system will work, and the car can decelerate. The car's braking system mainly consists of a vacuum booster pump, master brake cylinder, wheel brake cylinder, brake pads, and brake discs. After the driver presses the brake pedal, the vacuum booster pump can provide assistance, which helps the driver to press the brake pedal easily.
6
0
Share

What is the 0-100km/h acceleration time for the 2021 Teana 2.0L?

Teana 2.0L model achieves a 0-100km/h acceleration time of 5.9 seconds. The Teana is a mid-size sedan under Dongfeng Nissan, with body dimensions of 4901*1850*1450mm, a wheelbase of 2825mm, a fuel tank capacity of 61.3L, a trunk capacity of 586L, and a curb weight ranging from 1456kg to 1511kg. The 2021 Teana 2.0L model is equipped with a CVT continuously variable transmission and a 2.0L naturally aspirated engine, delivering a maximum torque of 197Nm and a maximum power of 115kW. It requires 95-octane gasoline and comes with 205/65R16 tires. Factors affecting a vehicle's 0-100km/h acceleration time include: Torque: Torque, in simple terms, indicates how much force is available. The greater the torque, the more force is applied to propel the vehicle, resulting in faster acceleration. For example, the Audi R8 has a maximum torque of 570Nm and accelerates from 0-100km/h in 3.1 seconds, while the BMW 6 Series GT has a maximum torque of 400Nm and achieves 0-100km/h in 6.5 seconds. Transmission efficiency: The transmission acts as a medium for power transfer, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, the ranking of transmission efficiency is as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is referred to as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the Audi R8 has a power-to-weight ratio of 373Hp/T, while the BMW 5 Series has a ratio of 108Hp/T.
1
2
Share

How many kilometers should a car drive before changing the engine oil?

There is no fixed mileage for changing the engine oil in a car. Generally, conventional engine oil should be changed after about 5,000 kilometers; semi-synthetic oil should be changed after about 7,500 kilometers; and full-synthetic oil should be changed after about 10,000 kilometers. The frequency of oil changes depends on factors such as the usual driving environment, personal driving habits, and time intervals. If you frequently encounter traffic jams, drive in areas with a lot of dust, or in extreme temperatures (either hot or cold), the oil should be changed earlier. For vehicles that often drive on highways with minimal traffic congestion, the oil change interval can be extended. Engine oil plays a crucial role in lubricating and reducing friction, aiding in cooling, sealing to prevent leaks, preventing rust and corrosion, and cushioning shocks in the engine.
15
3
Share

What does the 'w' in motor oil specifications mean?

The 'w' in motor oil specifications stands for 'winter', indicating that the oil can be used normally during winter if it contains 'w' in its specification. Motor oil, also known as engine lubricating oil, serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. Motor oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives compensate for and improve the shortcomings of the base oil, imparting certain new properties, making them an important component of lubricating oil.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.