What is the maximum horsepower of the Fit?

What are the effects of high fuel tank pressure?

The impact of high fuel tank pressure is difficulty in refueling the car, as fuel struggles to enter the tank. If the fuel tank pressure remains excessively high for a prolonged period, it can cause the tank to deform, and the fuel pump may sustain damage due to excessive load. When the fuel tank pressure is too high, it is essential to promptly clean the fuel lines or replace the filter. Precautions for fuel tank cleaning: 1. Inspect the fuel tank, fuel lines, and connections for any dents or oil leakage, and ensure the fuel tank bracket mounting bolts are tightened; 2. Open the fuel tank cap, remove the filter basket to siphon out the fuel, leaving only about 30L of gasoline in the tank. Insert a clean plastic tube from the fuel filler into the bottom of the tank and gently agitate the gasoline at the bottom to achieve a cleaning effect through turbulence.

19

3

Share

Is it necessary to use 95 gasoline for the Tayron?

Tayron does not necessarily require 95 gasoline. The fuel grade for Tayron is 95, and it can use 95 gasoline or higher. Taking the 2020 Tayron as an example, its body dimensions are: 4589mm in length, 1860mm in width, and 1660mm in height, with a wheelbase of 2731mm. The fuel tank capacity is 60 liters, and the trunk capacity is 506 liters, with a curb weight of 1545kg. The 2020 Tayron features a ventilated disc front suspension and a disc rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a dual-clutch transmission.

8

1

Share

What Causes the Malfunction Light to Illuminate in a Gas-Converted Vehicle?

Reasons for the malfunction light illuminating in a gas-converted vehicle: 1. The ignition advance device is not installed; 2. The ignition advance device is not installed; 3. Loose sensors; 4. Ignition problems. The engine of a car is surrounded by oxygen sensors, which are installed in front of and behind the three-way catalytic converter in the exhaust pipe header. The oxygen sensor in front of the three-way catalytic converter is used to detect the oxygen content in the exhaust. The ECU adjusts the air-fuel ratio of the engine based on the signals from this oxygen sensor. If the data transmitted to the ECU by the oxygen sensors in front of and behind the three-way catalytic converter are the same, it indicates a malfunction in the three-way catalytic converter, which will cause the malfunction light to illuminate.

3

5

Share

How to Fold Down the Rear Seats in the Envision?

Here are the steps to fold down the rear seats in the Envision: 1. Move the front seats forward. 2. First, retract the rear seat armrest. 3. Stow the seatbelt buckle of the middle rear seat. 4. Lower the headrest to its lowest position. 5. Pull the seat folding switch located on the shoulder of the rear seat to fold it down. Here are the methods to adjust the front seats in the Envision: 1. Lift/Press the seat cushion adjustment switch to raise/lower the seat cushion height. Moving the switch forward or backward allows the seat to move forward or backward. 2. Adjust the backrest tilt angle by pulling forward or backward—push forward to tilt forward and pull backward to tilt backward. 3. Press the lumbar support button to adjust the lumbar support angle.

1

5

Share

Is the Infiniti QX30's rear suspension an independent suspension?

Infiniti QX30's rear suspension is an independent suspension, and the front suspension uses a MacPherson independent suspension. The Infiniti QX30 is a compact SUV, equipped with a 1.6-liter turbocharged engine and a 2.0-liter turbocharged engine. This car has a four-wheel-drive version, which is equipped with a timely four-wheel-drive system and uses a multi-plate clutch-type central differential. The 1.6-liter turbocharged engine has a maximum torque of 156 horsepower and 250 Nm, which can output maximum power at 5300 rpm and maximum torque at 1250 to 4000 rpm. This engine is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. The body dimensions of the Infiniti QX30 are 4425mm in length, 1815mm in width, and 1513mm in height.

7

4

Share

What is the standard thickness of Fit brake pads?

The standard thickness of Fit brake pads is generally around 1.5cm. With the braking operations during car usage, the brake pads will wear down and reduce in thickness. When the brake pad thickness falls below 3mm, replacement is required. Here is an introduction to the Honda Fit: 1. The Honda Fit features a compact and stylish exterior design. 2. The interior style of the Honda Fit embodies the design philosophy of the Honda Motor Group. The new Fit offers more fashionable visual effects compared to the older model, with significantly improved interior space. 3. The engine comes in two displacement options: 1.3 and 1.5 liters. The 1.3L engine delivers a maximum horsepower of 73kW, providing a solid foundation for the Fit's dynamic performance. Additionally, the Fit incorporates comprehensive collision safety technology.

2

4

Share

What is the maximum horsepower of the Fit?

What are the effects of high fuel tank pressure?

Is it necessary to use 95 gasoline for the Tayron?

What Causes the Malfunction Light to Illuminate in a Gas-Converted Vehicle?

How to Fold Down the Rear Seats in the Envision?

Is the Infiniti QX30's rear suspension an independent suspension?

What is the standard thickness of Fit brake pads?

What is a Green License Plate?

How to Deal with Minor Scratches and Paint Chips on a Car?

How to Measure the Condition of a Car Blower Resistor?

How to Remove the Door Trim Panel of a Skoda Octavia?