What is the maximum horsepower of domestic tractors?

1 Answers
VonAubrey
07/30/25 2:35am
The maximum horsepower of domestic tractors is 600. The development of this vehicle is entirely targeted at the domestic heavy haulage market rather than the ordinary road transport market. The engine equipped in this vehicle: The heart of this 600-horsepower heavy-duty tractor will be an imported Cummins ISX series engine, which is considered a flagship power unit in its home market of North America and is installed in many American heavy trucks. This inline 6-cylinder engine has a displacement of 15 liters, with a maximum output of 600 horsepower and peak torque reaching 2,237 N·m. Horsepower of domestic tractors: Currently, heavy haulage vehicles above 500 horsepower in China are almost entirely dominated by imported vehicles, while the vast majority of domestic high-horsepower tractors are concentrated in the 400 horsepower range.
Was this review help?
19
0
Share
More Forum Discussions

What causes the engine light to flash frequently?

The reasons for the engine light flashing frequently are as follows: 1. Poor quality gasoline that does not meet standards. Generally, the engine light comes on due to the use of substandard gasoline. 2. Oxygen sensor failure. A damaged oxygen sensor or a loose or damaged sensor connector can cause the air-fuel mixture to be too lean or too rich, triggering the engine light. 3. Symptoms such as unstable idle, poor acceleration, backfiring in the intake manifold, and black smoke from the exhaust pipe can cause the engine light to flash frequently. 4. Dirty engine cylinder interiors and accumulated carbon deposits. Over time, carbon deposits build up inside the engine, altering its design parameters and causing irregular ignition, leading to engine knocking and frequent flashing of the engine light.
8
4
Share

What level does the Changan DS7 belong to?

Changan DS7 belongs to the A+ level car. More information about Changan DS7 is as follows: 1. As the flagship of the DS brand, the Changan DS7's design is both elegant and popular, perfectly showcasing French aesthetics: the diamond-patterned front grille with a strong sense of texture, the scimitar-shaped LED daytime running lights, and the rotating 3-LED headlights are full of design and sophistication. 2. The Changan DS7 is equipped with a 12-inch full LCD dashboard, touchscreen central control, Electra sound system, Nappa leather seats with a bracelet-style design, night vision system, and other configurations.
18
1
Share

Where is the VIN located on the Elysion?

The VIN of the Dongfeng Honda Elysion is located under the hood, right above the engine cover. More information about the VIN is as follows: 1. The VIN (Vehicle Identification Number), known as the vehicle identification code in Chinese, is a unique set of characters assigned by the manufacturer to identify a vehicle. 2. The VIN is a 17-character alphanumeric code, also referred to as the 17-digit identification code, chassis number, or 17-digit number. The arrangement and combination of the vehicle identification code ensure that no two vehicles of the same model will have the same number within 30 years, providing a unique identifier for the vehicle. Therefore, it can be called the "car's ID card".
18
4
Share

What are the precursors of a bad crankshaft sensor?

Crankshaft position sensor damage, the car shows the signs of no high voltage, no fuel injection, unable to start the car. Of course, the most obvious phenomenon is the engine fault light on the dashboard. Because the crankshaft position sensor is damaged, the cranking angle of the crankshaft cannot be confirmed, and the engine computer does not receive the signal from the crankshaft position sensor, so to protect the engine, it will not ignite or inject fuel. There are three types of crankshaft position sensor damage: 1. Magnetic induction type: The fault of the magnetic induction crankshaft position sensor is that the engine cannot start. When checking the engine condition, it is found that the delayed ignition is the real reason why the engine cannot start. Solution: Reconnect the wiring, readjust the distributor, and check the ignition timing. 2. Hall effect type: The Hall effect crankshaft position sensor is used for sequential fuel injection, ignition timing, and knock control of the engine. When a fault occurs, the transmitted signal is not within the normal range. Solution: Check whether the permanent magnet, magnetic conductive plate, and integrated circuit are normal. 3. Photoelectric type: The fault of the photoelectric crankshaft sensor is poor engine acceleration, automatic flameout during starting, and sometimes high-voltage sparks. The reason is poor ignition system performance, resulting in weak high-voltage sparks. Solution: Check the low-voltage circuit, main relay, internal short circuit of the high-voltage ignition coil, engine control unit failure, and abnormal wear of some mechanical parts.
1
0
Share

Can a Brand-New Car Go on a Long Highway Trip?

Can a Brand-New Car Go on a Long Highway Trip? A brand-new car can indeed go on a long highway trip. Here are some precautions to consider when driving a new car on a long highway journey: 1. Do not exceed 100 km/h on the highway, avoid sudden acceleration or deceleration, and gently press the brakes and accelerator. 2. It is advisable to have the car inspected at a 4S store before the trip. 3. Overloading the new car can cause damage to its components. 4. Choose roads with better quality to minimize excessive vibration, impact, or emergency braking, reducing the load on the body and powertrain. 5. Take breaks at service areas for trips longer than 2 hours, as prolonged continuous engine operation can lead to increased wear and tear on components.
16
1
Share

Does the Trumpchi GS8 have window anti-pinch function?

Trumpchi GS8 windows are equipped with anti-pinch function. The anti-pinch controller not only enhances vehicle safety and elevates the car's grade, but also significantly extends the service life of the power windows. At the upper and lower dead center positions, the controller automatically cuts off power regardless of whether the window switch is released, preventing motor burnout due to prolonged stalling. Below is more information about the window anti-pinch function: 1. Function: Generally, the window anti-pinch feature in cars operates based on 'touch' control. When the control system detects pressure during window ascent, it immediately stops the upward movement and commands the window to descend to prevent injuries. 2. Composition: It consists of infrared transmitters and receivers installed on the window interior trim, which continuously and precisely scan the designated area. Within a range of 4~200 mm from the upper edge of the window opening frame, the system will instantly stop window ascent upon detecting any foreign object.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.