What is the maximum heel height allowed for driving shoes?

2 Answers
Gandalf
09/05/25 2:29am
According to traffic safety regulations, behaviors that hinder safe driving such as wearing slippers, high heels over 4 cm, driving barefoot, or holding a phone while talking are prohibited. Below is relevant information about driving footwear: 1. Penalties for violations: Violators will be deducted 2 points and fined. Wearing shoes with 3 cm heels is technically permissible for driving, though it borders on violating regulations. While the law clearly specifies heel height restrictions, excessively high heels or thick-soled shoes significantly impact driving performance. Driving with heels exceeding 4 cm is strictly prohibited. 2. Primary impacts include: (1) With overly high heels (above 4 cm), when attempting to press the brake or accelerator, the heel may get stuck between the pedal and car floor, preventing full depression and severely compromising normal operation. (2) During transitions between accelerator and brake pedals, heels are prone to getting lodged during the switch. (3) Wearing thick-soled shoes like platforms or height-increasing footwear weakens foot sensitivity to pedal depth, potentially causing excessive acceleration or deceleration.
Was this review help?
7
5
Share
JadeMarie
09/17/25 3:09am
I've been driving for over 20 years and always remind my friends that heels shouldn't be too high, otherwise it's very dangerous. High heels can get stuck under the brake or accelerator pedal, and if you can't press down in an emergency, an accident will happen. Although there's no law specifying how many centimeters, from a safety perspective, heels over 3 centimeters pose significant risks. It's best to wear flat shoes or casual shoes with heels within 1-2 centimeters. Think about it - during long-distance driving, your foot control needs to be flexible, and higher heels will slow your reaction time. I suggest keeping a pair of dedicated driving shoes in the car - just change into them for safety and convenience. Especially during rainy days or on mountain roads where surfaces are slippery, wearing high heels makes it easier to lose control. Many new drivers overlook this point and only regret it after rear-ending someone. In short, safety first - don't risk it for a bit of fashion.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

Which manufacturer produces WM Motor electric vehicles?

WM Motor electric vehicles are produced by WM Motor Technology Group Co., Ltd. The WM is a compact SUV. Taking the WM EX5 2021 EX5-Z Dynamic Edition as an example, its body dimensions are: length 4585mm, width 1835mm, height 1672mm, with a wheelbase of 2703mm and a trunk capacity ranging from 488 to 1500 liters. The WM EX5 2021 EX5-Z Dynamic Edition is equipped with a permanent magnet synchronous motor, with a total motor power of 160 kW and a total motor torque of 225 N·m. It features a MacPherson independent front suspension and a variable cross-section trailing arm torsion beam rear suspension.
13
2
Share

Does the Wuling Hongguang S3 have an automatic transmission?

The Wuling Hongguang S3 does not have an automatic transmission. Taking the Wuling Hongguang S3 2019 Manual Standard National VI model as an example, its body dimensions are: length 4655 mm, width 1735 mm, height 1790 mm, with a wheelbase of 2800 mm. It has a fuel tank capacity of 49 liters and a curb weight of 1440 kg. The Wuling Hongguang S3 2019 Manual Standard National VI is equipped with a 1.5T turbocharged inline 4-cylinder engine, delivering a maximum power of 108 kW at 5200 rpm and a maximum torque of 250 Nm between 2200 to 3400 rpm.
15
5
Share

How to start the Sylphy when the key fob battery is dead?

Sylphy key fob battery dead starting method: 1. Press the side with the logo firmly against the push-button start switch; 2. Hold for a few seconds, then press directly to start. The Sylphy is a compact sedan under Dongfeng Nissan, with body dimensions of: length 4631mm, width 1760mm, height 1503mm, and wheelbase of 2700mm. The Sylphy is equipped with a 1.6L 122HP L4 engine, with a maximum power of 90kW and maximum torque of 155Nm. It uses MacPherson strut independent suspension at the front and torsion beam non-independent suspension at the rear.
5
0
Share

What Causes the Engine Light to Illuminate on the Car Dashboard?

The reasons for the engine light illuminating on the car dashboard are: 1. Sensor issues; 2. Poor engine maintenance; 3. Substandard fuel quality; 4. Poor combustion of the air-fuel mixture; 5. Dirty air filter in the car; 6. Damaged catalytic converter or thermostat; 7. Engine misfire. Other indicator lights on the car dashboard include: 1. Seatbelt indicator: Shows whether the seatbelt is locked; 2. Door indicator: Displays the status of each door; 3. Oil pressure indicator: Shows the oil pressure status inside the engine; 4. Coolant temperature indicator: Displays the temperature of the coolant in the engine; 5. Handbrake indicator: Shows the status of the vehicle's handbrake.
15
2
Share

How long after replacing the windshield can I drive?

You can drive approximately 12 hours after replacing the windshield. Post-replacement precautions include: 1. Do not wash the car for three days, and remove the adhesive tape fixing the windshield position after three days; 2. Try to avoid driving on excessively bumpy roads; 3. Avoid emergency braking and rapid acceleration; 4. Do not insert parking permits or other cards into the gap between the windshield and the dashboard; 5. Avoid highway driving and keep the speed below 80 km/h; 6. Do not apply window tint within seven days; 7. Do not open the windows while driving for three days. The function of the windshield is to maintain a certain level of clarity when impacted and cracked, ensuring the driver's field of vision remains unaffected and withstanding strong impacts.
14
3
Share

What is the reason for frequent scratches on the window glass when rolling up and down?

The reason for frequent scratches on the window glass when rolling up and down is: there is sand and dirt inside the window rubber seal, which causes friction when the glass moves. The solution is to replace the rubber seal or clean it. The maintenance methods for window glass are: 1. Use a soft cloth when cleaning the car; 2. Use more glass cleaner to wash the glass. The window is an important part of the entire car body, serving to meet the needs of interior lighting, ventilation, and visibility for the driver and passengers. Depending on the installation position, the glass is divided into: front and rear windshields, side windows, and door windows. The window structure is usually a curved and sealed type, with rubber sealing strips connecting the window frame and the glass on the car body.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.