···
Log in / Register

What is the maximum fuel capacity of a Corolla?

5 Answers
JaxonAnn
07/29/2025, 09:14 PM

Toyota Corolla's fuel tank capacity varies by configuration, with options of 43L and 50L. The manufacturer recommends using 92-octane gasoline. Below are the steps to operate the fuel tank cap of a Toyota Corolla: 1. Locate the fuel tank cap switch below the left side of the driver's seat. 2. To open the fuel tank cap, pull the switch. 3. You can then open the fuel tank cap for refueling. Extended steps for the Toyota Corolla refueling process: 1. To open, press the left side of the fuel tank cap. 2. Turn the fuel tank cap cover to the left to remove it. 3. The fuel tank cap has a designated placement for the cover; insert it accordingly. 4. Insert the fuel nozzle into the tank. 5. The first automatic shut-off of the nozzle indicates the tank is full. Continuing to refuel will fill the expansion chamber in the tank. 6. Do not remove the nozzle immediately; leave it at the fuel inlet for 5 seconds to allow all fuel to drain into the tank. 7. Replace the fuel tank cap cover, ensuring it is tightly secured. 8. Finally, close the fuel tank cap.

Was this review help?
4
3
Share
StBriella
08/15/2025, 02:49 AM

I've been driving my Corolla for several years, and the fuel tank is about 53 liters. I usually fill up when the fuel light comes on, and it takes about 48 liters to reach the pump's automatic shut-off. The manual says not to exceed 50 liters for safety. Last time I went on a long trip out of town, I tried to add a bit more and almost overflowed—the pump nozzle clicked off three times. The gas station attendant told me not to be greedy, as high pump pressure can cause backflow and may allow the charcoal canister to suck in fuel, affecting the exhaust. Now I stop as soon as the pump clicks off. Anyway, in the city, a full tank is enough for about 600 kilometers. Remember, overfilling can also increase fuel consumption—carrying an extra 5-6 pounds of fuel each time isn't worth it.

Was this review help?
9
3
Share
Expand All
BrodyMarie
10/20/2025, 01:57 AM

I checked the manual for the Corolla's fuel tank capacity, and it varies by model year. My 2021 model has a 50-liter tank, but in reality, when the low fuel light comes on, I can only fill up about 45-48 liters because space needs to be left at the top of the tank for gasoline vapor. Last week during maintenance, the mechanic reminded me that older National V emission standard models used a 53-liter tank, while the newer ones have slightly smaller tanks. Never overfill the tank—once I filled it until I could see the fuel level sloshing at the filler neck, and during summer, the gasoline smell was particularly strong. The repair shop said this could damage the charcoal canister, and replacing it could cost over a thousand yuan. You should stop filling as soon as the pump clicks off.

Was this review help?
11
3
Share
Expand All
AnastasiaRose
12/03/2025, 01:29 AM

The fuel tank capacity of the Corolla depends on the specific model. Mainstream models typically range between 50-55 liters, while the older hybrid version is smaller at only 43 liters. Before refueling, I usually check the fuel gauge position on the dashboard. I never fill beyond 95% capacity, and generally, the fuel pump automatically stops at around 48 liters. One time, when the display showed only 30 km of remaining range, I refueled and ended up adding 52 liters, nearly exceeding the limit. The fuel attendant explained that the tank is designed with a safety margin, and overfilling can cause gasoline to seep into the evaporation system, potentially triggering a warning light. It's advisable not to overfill, as it can affect driving safety.

Was this review help?
11
5
Share
Expand All
BarrettLee
01/23/2026, 02:52 AM

I've been driving a Corolla for four years, and while the fuel tank is labeled as 50 liters, it can actually hold up to 55 liters. However, a mechanic told me that the labeled capacity and the actual usable amount are two different things. During design, about 10% of space is reserved at the top to accommodate fuel vapors, so filling up until the pump clicks off is sufficient. Once, I insisted on filling it to the brim for a long trip, and gasoline overflowed from the vent tube onto the back seat, making cleanup particularly troublesome. Now, I wait until the fuel gauge shows a quarter left and fill up about 40 liters each time, which is enough. Overfilling the tank actually increases evaporative emissions, which is also harmful to the environment.

Was this review help?
1
3
Share
Expand All
More Forum Discussions

What does the MIL warning light in a diesel vehicle mean?

Diesel vehicle MIL warning light is the engine malfunction indicator, indicating that there is a fault in the vehicle's engine. In this situation, the vehicle should be turned off and not driven further. The reasons for the MIL light coming on are: 1. Faulty oxygen sensor causing improper air-fuel mixture ratio; 2. Excessive carbon buildup in the throttle or engine interior. When the MIL light illuminates, for safety considerations, the engine control system doesn't immediately limit torque output but automatically maintains a buffer period to allow more time for repairs. Only when the vehicle meets torque limitation conditions during driving will it exhibit power loss.
3
3
Share

Is a Photo Required for Driver's License Renewal?

A new photo is required for the 6-year license renewal. A recent one-inch, white-background, color, bareheaded photo must be used for driver's license renewal. If the photo does not meet the requirements, a new qualified photo needs to be taken. When initially obtaining a driver's license, its validity period is six years. After the motor vehicle driver's license is renewed, the original document becomes invalid and cannot be used again. It is necessary to properly keep the driver's relevant information on the motor vehicle driver's license and not discard it casually, otherwise, information leakage may easily cause problems in the use of the motor vehicle driver's license.
5
4
Share

How to Pull Out a Dented Car Rocker Panel?

Methods to pull out a dented car rocker panel: 1. Plastic material: Pour some hot water on the dented area to try to make it bulge out. If that doesn't work, use some professional suction tools to pull it out; 2. Metal material: Minor dents can be pulled out using a dent puller. If it can't be pulled, you need to go to a 4S shop for sheet metal repair. Severe cases may require cutting and welding new corner pieces; 3. Aluminum alloy material: Generally, it cannot be repaired and needs to be replaced. Car rocker panels are usually made of hot-formed steel or very high-strength materials because, in the event of a side collision, the rocker panel, B-pillar, and reinforcement beams inside the door work together to protect the occupants inside the vehicle.
1
4
Share

What is DS car called in Chinese?

DS car is called Di Ai Shi in Chinese, which is a high-end luxury brand under Citroën. DS has many sedan and SUV models, such as DS7, DS6, and DS3 for SUVs. Taking the 2021 35THP DS7 Early Spring Limited Edition as an example: it is a compact SUV launched by DS Automobiles, with a length, width, and height of 4603mm, 1891mm, and 1626mm respectively. The 2021 35THP DS7 Early Spring Limited Edition is equipped with a 1.6T turbocharged engine, with a maximum power of 133kw and a maximum torque of 250nm, matched with an 8-speed automatic transmission.
3
3
Share

Should the Vehicle Stability System Be Kept On or Off Normally?

The vehicle stability system is normally enabled by default. It primarily detects the driving conditions of the car through sensors. When the car shows a tendency to skid during driving, the system applies braking to the corresponding wheels to prevent the risk of skidding. In situations where the car needs to make an emergency turn or sudden avoidance, if the wheels lose traction and start to slip, the vehicle stability system intervenes by applying braking force to the skidding wheels, thereby reducing the risk of rollover. The vehicle stability system consists of a control unit and various sensors, including a steering sensor (to monitor the steering angle of the wheel), wheel sensors (to monitor the speed and rotation of each wheel), a skid sensor (to monitor the vehicle's rotation around the vertical axis), and a lateral acceleration sensor (to monitor the centrifugal force during turns).
15
0
Share

What is the difference between engine oil A1B1 and A3B4?

The differences between engine oil A1B1 and A3B4 are: 1. Different grades: Engine oil A1B1 is an economical fuel with low viscosity, equivalent to API SJ grade; A3B4 is a higher-grade product, equivalent to API SL grade. 2. Different uses: Engine oil A1B1 has stable oil quality and long-lasting grade, used for gasoline engines and light-duty diesel engines with extended oil change intervals; A3B4 has stable oil quality and is designed for high-performance gasoline and direct-injection diesel engines. Engine oil, also known as engine lubricant, can lubricate and reduce friction, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption for the engine.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.