What is the maximum age limit for obtaining a driver's license?

2 Answers
EvanFitz
07/25/25 8:54am
The maximum age limit for obtaining a driver's license is 70 years old. Below are some important considerations for taking the driver's license test: 1. Don't forget to release the handbrake when starting: When first learning to drive, always follow the correct sequence when starting the car. Regardless of whether the handbrake was engaged when parking, always check and release the handbrake before starting. 2. Always fasten your seatbelt: Good habits start with wearing a seatbelt. Although seatbelts may feel uncomfortable, in the event of a high-speed collision, this small belt can save your life. 3. Don't forget to engage the handbrake when parking: This issue is similar to wearing a seatbelt. During practice sessions, the training area is usually flat, and since students take turns driving, instructors may not emphasize this. However, failing to overcome this bad habit can lead to serious problems during actual driving. A moment of carelessness can result in the car rolling, causing damage to your vehicle and potentially harming others' property or even lives. The mistake may seem small, but the consequences can be severe. 4. Position your right foot correctly: Driving school cars often have a higher idle speed. Instructors usually discourage students from pressing the accelerator during initial lessons, and many even disconnect the throttle cable. Since the car moves at idle speed, it's very slow, and sometimes pressing the clutch can stop the car immediately. Over time, many students develop the habit of leaving their right foot idle. This habit can lead to panic in emergencies when driving a manual transmission car, causing delays in finding the brake pedal and potentially leading to accidents where the accelerator is mistakenly pressed instead of the brake. 5. Don't forget to shift to neutral when exiting the car: Forgetting to shift back to neutral or Park after stopping can cause the engine to stall. If you also forget to engage the handbrake, the car might lurch forward, causing damage to yourself or others.
Was this review help?
12
3
Share
DiJason
08/10/25 7:04pm
When I first started learning to drive, I was also concerned about the age issue. In fact, there is no specific maximum age limit for obtaining a driver's license in China. Theoretically, as long as you are in good health, even people in their seventies or eighties can take the test. However, the key point is that national regulations require drivers over the age of 70 to submit a physical condition certificate annually and pass a medical examination to renew their license. This is mainly to consider the risks of declining reaction ability and vision. I remember my friend's father was still taking the test at the age of 75. It took him some time to adapt, but as long as his skills were up to par, there was no problem. Nowadays, with advanced automotive technology, many cars come with driver assistance features, such as automatic braking systems, which can help elderly drivers stay safer on the road. Don’t worry about age; as long as you are in good health, you can enjoy the freedom of driving. It’s advisable to consult the local vehicle management office in advance to understand the specific medical examination requirements.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

What methods can be used to remove rust spots from a car?

Methods for removing rust spots from a car are as follows: 1. Use a grinder to sand the rust, ensuring the surface is as smooth as possible and the rust is completely removed. If any residual rust remains, continue sanding until the surface is smooth and rust-free. 2. Take a clean piece of cardboard, add body filler and hardener, and mix them thoroughly until fully integrated. 3. Apply the well-mixed body filler and hardener compound onto the rusted area. Check for any spots that may not have been adequately filled and apply more of the mixture, then wait for it to dry. 4. Once dry, use a polisher to polish the area.
17
0
Share

How to Turn on the High Beam of Volkswagen Passat?

Turn the rotary switch to the rightmost position to turn on the low beam headlights, then push the lever on the left side of the steering wheel (the turn signal lever) backward to activate the high beam. This lever can be moved forward, backward, up, and down. Moving it up and down controls the left and right turn signals, pushing it forward makes the headlights flash, and pulling it backward turns on the high beam. More related information is as follows: 1. Adjust the light intensity based on the distance of the filament. The high beam is focused at its focal point, emitting parallel light that is more concentrated and brighter, capable of illuminating distant and high objects. The low beam is focused beyond its focal point (between 1x and 2x the focal distance), emitting divergent light that can illuminate a larger area of nearby objects. The difference between high beam and low beam: Both are used for nighttime illumination, but the high beam has a higher angle and longer range, while the low beam has a lower angle and shorter range. 2. It is generally best not to use the high beam when driving in the city because urban lighting conditions are usually good. The high beam's high angle can easily dazzle oncoming drivers and pedestrians, affecting their vision and posing a safety hazard. It is also considered impolite driving behavior. The high beam can be used on highways or in rural areas without streetlights to expand the field of vision. However, when encountering oncoming vehicles, it is advisable to switch to the low beam for safety and courtesy.
2
0
Share

Where is the car fuse located?

Car fuse locations are as follows: 1. Generally, there are two fuse boxes in a vehicle containing the car fuses. One is located on the right side of the engine compartment, mainly responsible for the safety of external electrical components such as ECU, windshield washer fluid, lights, horn, ABS circuit protection, etc. The other is located on the lower left side of the steering column, primarily ensuring the normal operation of interior electrical devices like cigarette lighter, power windows, electric seats, and airbags. 2. If any electrical equipment stops working during vehicle operation, it may be caused by a blown fuse and requires prompt replacement.
4
4
Share

Can you get on the highway without an ETC?

Cars without ETC can get on the highway because ETC is not mandatory. According to Article 19 of the "Notice on Vigorously Promoting the Development and Application of ETC on Highways" issued by the State Council, vehicles without ETC in 2020 cannot enjoy toll discounts, and in the future, only one manual lane will be retained at highway toll stations, requiring payment through the manual channel. It may be somewhat inconvenient during holidays. ETC is just a different toll collection method and is not related to whether you can get on the highway. There are two toll collection methods on highways: manual toll collection and ETC toll collection. ETC is the abbreviation for Electronic-Toll-Collection, meaning electronic toll collection system. To apply, you need to provide the original and photocopies of the vehicle owner's valid ID and vehicle registration certificate. If the application is not made by the owner, the agent's valid ID must also be provided. The photocopy of the vehicle registration certificate must include the page with the most recent annual inspection stamp; a bank card for deducting highway tolls; the applicant must be between 18 and 60 years old; and the vehicle must be registered under the individual's name. How ETC works: Through an onboard electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at the toll station. Using computer networking technology, it settles transactions with the bank in the background, allowing vehicles to pass through highway or bridge toll stations without stopping to pay the toll. Benefits of installing ETC: Save time: Avoid the hassle of waiting in line; Green and environmentally friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and pollution; Reduce wear and tear: Save costs by decreasing the frequency of vehicle starts and stops, reducing wear and fuel consumption; Improve efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
7
2
Share

Where is the cabin air filter of DX7 located?

Southeast DX7's cabin air filter is located behind the glove box on the passenger side, and its model number is LAK948. The recommended replacement interval is generally when the vehicle has traveled 8,000 to 10,000 kilometers, but it can also be determined based on the external driving environment. The cabin air filter is a filter installed in the car's air conditioning system, which can absorb dust particles and protect the air conditioning cooling system. The replacement method for the Southeast DX7 cabin air filter is as follows: 1. Remove a plastic cover on top of the air filter housing, which is secured by 3 bolts. 2. The air filter housing is fixed by 4 metal clips; after removing them, the air filter will be visible. 3. Gently open the clips of the air filter housing to lift the entire cover. 4. Lift the cover of the air filter housing and remove the old air filter. 5. Install the new air filter, replace the cover, and secure the clips.
10
5
Share

How to Check the Tire Pressure Monitoring on Volkswagen Lavida?

To check the tire pressure monitoring on the Volkswagen Lavida, you can view the tire pressure status and adjust the tire pressure on the dashboard of the car, where there are corresponding buttons. The Lavida's tire pressure monitoring operates automatically and will alert you if there is any abnormality in the tire pressure. Information about tire pressure monitoring is as follows: 1. The so-called tire pressure monitor is a small tool used to monitor the air pressure in car tires. For daily driving, tire pressure is very important. If the tire pressure is too high, it can cause excessive tire wear and a slippery feeling while driving. 2. The tire pressure monitoring system uses wireless transmission technology, employing highly sensitive micro wireless sensors to collect data on car tire pressure and temperature, whether the car is in motion or stationary. This data is then transmitted to the main unit, which displays the car's tire pressure and temperature in real-time in a digital format. If there is any abnormality in the tire, it alerts the driver with a beep or voice warning.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.