What is the manual reset method for the Lavida maintenance reminder light?

3 Answers
OFrancisco
07/29/25 7:20am
Lavida maintenance reminder light manual reset method is: 1. Turn off the engine; 2. Press and hold the right SET button on the instrument panel; 3. While keeping the left hand holding this button, turn on the ignition with the right hand; 4. When the instrument panel displays entry into reset mode, release this button; 5. Within 20 seconds, press the left menu button to confirm reset. The Lavida (LAVIDA) is Shanghai Volkswagen's first independently developed A-segment car, with body dimensions of 4605mm in length, 1765mm in width, and 1460mm in height. The Lavida maintains the excellent quality of German design while incorporating many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements.
Was this review help?
20
1
Share
EverlyMarie
08/13/25 12:19am
I've been driving my Volkswagen Lavida for several years, and manually resetting the maintenance light is quite simple—it can be done at home. First, turn off the engine and ensure the key is in the OFF position. Then, press and hold the reset button on the dashboard, usually labeled 0.0 or RESET. Next, turn the key to the ON position without starting the engine—the dashboard will light up. Wait a few seconds until the wrench light flashes a few times and then goes off, indicating the reset is successful. After resetting, the maintenance reminder won’t keep popping up to annoy you, and you can service the car based on actual mileage. I do this myself every time—it saves money and is convenient. Just remember to check the oil and filters regularly to avoid major issues. Volkswagen’s design is so user-friendly, and developing small habits like this can extend your car’s lifespan.
Was this review help?
8
1
Share
Expand All
DiCassandra
10/04/25 6:25am
As a driver who enjoys tinkering with cars, I've found that resetting the maintenance light on the Lavida isn't too difficult. The method involves firmly holding down the 0.0 button after turning off the ignition, then turning the key to power the dashboard without starting the engine. After about 5 seconds, the light should disappear. The button's location may vary depending on the Lavida's model year—older versions have it in the center of the dashboard, while newer ones place it near the steering wheel. It's advisable to check the manual first to confirm. After resetting, the maintenance reminder is cleared, ensuring timely servicing. However, if the light comes on, don't rush to reset it; it's better to check the oil level and tire wear first. Occasionally doing it yourself can also help build some automotive knowledge, like understanding electronic system basics, which can be handy for handling minor issues in emergencies when tools aren't available.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

What to Do When the Car is Too Close to the Left Side?

Straighten back a little, then drive forward to the right a bit, and straighten back again. Repeating this two or three times should do the trick. Depending on the size of the space, if you realize it's not suitable right after entering, you can try reversing out the same way and then re-entering. If the car isn't too close, you can make slight adjustments. If it's extremely close, you'll need to be very careful and move out bit by bit.
15
4
Share

How to adjust the low beam height of the 2021 Malibu XL?

Enter the driver's cabin and you can see the headlight height adjustment knob on the left side of the dashboard. Adjust according to the headlight height levels marked on the knob. When the highest light position is needed, turn the knob to the "0" position. To lower the light by one level, rotate the knob to the "1" position. The "2" position provides a relatively low light height. When the lowest light position is required, turn the knob to the "3" position.
6
2
Share

How to Deal with Speeding?

If the speed exceeds the speed limit by less than 10%, a warning will be issued. On roads with a speed limit below 50 km/h, if the speed exceeds the speed limit by 10% or more but less than 20%, a fine will be imposed. If the speed exceeds the speed limit by 20% or more but less than 50%, by 50% or more but less than 70%, or by 70% or more, a fine will be imposed. On roads with a speed limit between 50 km/h and 80 km/h, if the speed exceeds the speed limit by 10% or more but less than 20%, a fine will be imposed. If the speed exceeds the speed limit by 20% or more but less than 50%, by 50% or more but less than 70%, or by 70% or more, a fine will be imposed.
19
3
Share

How to Turn on the High Beam on a Mercedes-Benz?

There are two methods to turn on the high beam: The first method is to pull the left-hand stalk toward the driver to activate the high beam. Releasing the stalk will automatically reset it and turn off the high beam. The second method is to push the stalk away from the driver, which will keep the high beam on continuously. Below is an introduction to the high beam: 1. Vehicle lights adjust the intensity of light based on the distance of the filament: The high beam is focused at its focal point, emitting light that travels parallel, is more concentrated, and brighter, allowing it to illuminate distant and high objects. The low beam is positioned beyond its focal point (between 1x and 2x the focal length), emitting light in a divergent pattern to illuminate a larger area of nearby objects. 2. The difference between high beam and low beam: Both are used for nighttime illumination, but the high beam has a higher angle and longer range, while the low beam has a lower angle and shorter range. 3. It is generally advisable not to use the high beam when driving in the city: Urban areas typically have good lighting conditions. The high beam's elevated angle can easily dazzle oncoming drivers and pedestrians, impairing their vision and posing safety risks, as well as being considered impolite driving behavior. 4. Alternately switching the high beam on and off at night can serve as a substitute for the horn to alert nearby pedestrians and vehicles: This helps avoid excessive noise. On highways or in rural areas without streetlights, using the high beam can expand the field of vision. However, when encountering oncoming traffic, it is recommended to switch to the low beam for safety and courtesy considerations.
3
5
Share

How to activate one-touch window lift for the 2021 Excelle?

To activate the function, first start the vehicle. Press and hold the switch to lower the window completely for 5 seconds without releasing, then press and hold to raise the window to the top for 5 seconds before letting go. Once the learning process is completed, the feature will be enabled. After activating the auto-lock feature, the vehicle will automatically lock the doors while driving. This function typically activates when the speed exceeds 15 km/h. When the car is stationary, the gear lever is in position P, and the ignition is turned off, all doors and the trunk lid will automatically unlock.
16
3
Share

How to File an Insurance Claim for a Windshield Damaged by a Stone?

After the accident occurs, preserve the accident scene and immediately report the incident to the vehicle's insurance company. If the third-party loss involves road facilities or another vehicle, it is necessary to report the incident to the traffic police department. Insurance company personnel will arrive at the scene and issue an "Inspection Report," while the traffic police department will also arrive and issue an "Accident Determination Certificate" on-site.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.