What is the manual method for resetting the maintenance reminder on the Geely Boyue?
3 Answers
The manual method for resetting the maintenance reminder on the Geely Boyue is: 1. Start the car and press the "SET" button to enter the instrument settings interface; 2. Find the "Maintenance Reset" setting in the settings interface, then click to confirm the reset. Taking the Boyue 2021 Million Edition 1.8TD Manual Two-Wheel Drive Comfort Model as an example: It is a compact 5-door, 5-seat SUV under Geely Auto, equipped with a 6-speed manual transmission and a top speed of 195 km/h. The dimensions of the Boyue 2021 Million Edition 1.8TD Manual Two-Wheel Drive Comfort Model are 4519mm in length, 1831mm in width, and 1694mm in height, with a wheelbase of 2670mm, a fuel tank capacity of 58L, a maximum engine torque of 250 N·m, and a maximum torque speed range of 1500 to 4500 rpm.
When I do DIY car maintenance, I often perform the service reset. For the Geely Boyue, the operation is quite simple: first, turn the key to the ON position without starting the engine. Then locate the button on the dashboard, hold it for about 5 seconds until the menu appears, navigate to the service reset option, and select confirm. The first time I did it, I forgot to turn off the engine and messed up the menu, which reset the clock. Since then, I always carefully read the manual before each operation. This method resets the service reminder light, ensuring accurate timing for the next service and preventing the light from staying on and causing distraction. Performing it regularly is like setting an alarm for the car, helping to track oil change intervals and extend engine life. I've searched online for videos of the steps for different model years of the Boyue, and most are similar—the key is not to rush and press buttons too quickly.
When I first started driving, I was even afraid of making mistakes with the maintenance reset. Actually, the steps are quite simple: insert the key and turn it to the ON position, but don't start the engine. There's a small button near the steering wheel on the dashboard—hold it down for a few seconds to bring up the settings menu, then select the maintenance reset option and confirm once. Stay steady during the operation and avoid accidentally pressing other buttons that might change the date settings. The first time I tried, I nervously pressed the wrong button, and the light didn't go off. I later found out on forums that button locations might vary by model. This operation simply lets the system know maintenance has been done, so the reminder light comes on at the right time. Resetting it promptly after maintenance saves the hassle of unnecessary trips to the repair shop. The manual has detailed illustrations—beginners might want to practice a few times to memorize the process. Learning car maintenance through these small details is quite fun, and I think it's totally worth it.
