What is the mantra for starting a manual transmission car?

1 Answers
Ezra
07/25/25 6:43am
The mantra for starting a manual transmission car is: Step 1 (clutch), Step 2 (engage first gear), Step 3 (turn on left signal), Step 4 (honk the horn), Step 5 (release handbrake), Step 6 (check surroundings), Step 7 (release clutch and accelerate). A manual transmission is a gearbox used to alter the engine's speed and torque transmitted to the driving wheels, enabling the car to achieve different traction and speed under various conditions such as starting from a standstill, climbing hills, turning, and accelerating. Advantages of manual transmission: 1. Provides more driving pleasure for car enthusiasts; 2. High transmission efficiency; 3. Relatively simple structure, easy to maintain; 4. Mature technology, low manufacturing cost; 5. High reliability.
Was this review help?
11
0
Share
More Forum Discussions

Honda CR-V Trunk Dimensions?

Honda CR-V trunk width is 1050mm, the shortest depth is 955mm, the maximum depth with rear seats folded down is 1870mm, and the height is 840mm. This vehicle's trunk can accommodate 20-inch, 24-inch, and 28-inch suitcases, making it a preferred choice for many families. Here is some related information about the Honda CR-V: 1. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda. It features a stylish and dynamic exterior with smooth lines, combining a rounded design with a sporty feel. The overall cabin space is spacious and ample, with no noticeable tightness in head or legroom. 2. In terms of power, the Honda CR-V is equipped with either a 2.0L or 2.4L engine, paired with a 6-speed manual transmission. The vehicle's dimensions are 4621mm in length, 1855mm in width, and 1679mm in height, with a wheelbase of 2661mm. 3. The front suspension uses a MacPherson strut independent suspension, while the rear suspension is a multi-link independent suspension. The drivetrain is front-engine, front-wheel drive, and it is a five-door, five-seat SUV.
19
2
Share

What are the reasons why an automatic transmission car does not move after starting and shifting gears?

Automatic transmission car does not move after starting and shifting gears due to reasons such as the handbrake not being released, clutch failure, or not pressing the brake pedal. If the handbrake of an automatic transmission car is not released, the vehicle may also not move when shifting into reverse gear. Automatic transmission vehicles generally have two types of handbrakes: mechanical and electronic. For a mechanical handbrake, you can press the handbrake button, lift it slightly upwards, and then release it. For an electronic handbrake, the issue might be a stuck motor or switch. The owner can disconnect the battery negative terminal for a few minutes and then reconnect it. If there is a failure in the reverse gear clutch or high gear clutch, or if the reverse gear brake is slipping, the owner should take the car to a 4S shop or repair shop for professional handling to resolve the issue. To shift into or out of the R gear, the brake pedal should be pressed, and the safety button on the gear lever should be pressed or the gear lever should be pushed down. Both P gear and N gear can be directly switched to R gear, but switching between forward gear and R gear should pause at N gear.
11
1
Share

How to Claim Compensation for a Car Scratched While Parked in a Residential Area?

Vehicle scratched while parked in a residential area claims process: Step 1: Report the incident promptly: If your vehicle is scratched while parked in a residential area, the first step is to report the incident promptly. In addition to reporting to the traffic management department, you must also report the incident to your insurance company within 48 hours. If the other party flees the scene, you can request the property management to provide surveillance footage to identify the person responsible for the scratch. Step 2: Assess the damage with the primary at-fault party's insurance company: A vehicle scratch is considered a two-party accident. You should call the 122 traffic police hotline to have the traffic authorities determine the respective responsibilities of both parties and issue a relevant liability determination document. Afterward, the primary at-fault party should report the incident to their insurance company, and both parties should go together to the insurance company to assess the damage. Step 3: Provide necessary documentation: After reporting the incident, you should provide the following documents or certificates: the original valid insurance policy, the insured's ID card, the annual inspection certificate of the insured vehicle, the driver's license of the person driving at the time of the incident (which must be valid and within the permitted vehicle class), and, for road traffic accidents, an accident certificate issued by the traffic authorities. For non-road traffic accidents, provide the corresponding accident certificate. Also, submit a list of damages caused by the accident and any related expense receipts. Step 4: Submit the claim documents: Once all the above procedures are completed, you can proceed to the insured's insurance company or an authorized auto repair shop to take photos, assess the damage, and process the claim. All damages must be assessed before repairs to determine the items and amount of loss. After the assessment is completed, you can proceed with repairing the damaged vehicle. Step 5: Receive the compensation payment: After the accident is settled, submit the claim documents to the insurance company within 10 days. The insurance company will calculate the compensation and then notify you to collect the payment.
15
5
Share

What are the reasons why an automatic transmission car does not move after shifting to D gear?

Automatic transmission car does not move after shifting to D gear due to the following reasons: handbrake not released, gear sensor failure, low oil level, and brake lock. Below are the detailed explanations: Handbrake not released: The handbrake is not released or not fully released, causing the car not to move. In this case, simply release the handbrake. Gear sensor failure: The transmission shift valve position sensor signal is incorrect, causing gear issues, and the vehicle cannot determine its real-time gear. It is recommended to focus on checking the signal generator that works with the sensor to thoroughly resolve the fault. Low oil level: Insufficient automatic transmission oil or low oil level will prevent the automatic transmission from shifting gears automatically and effectively transmitting power. In this case, simply add transmission oil. Brake lock: It may be that the brake is not released or is locked, causing the wheels to stop rotating due to strong braking force, resulting in the car not moving. In this case, clean the entire braking system and replace the brake master cylinder cup.
6
4
Share

How often should the transmission fluid of Emgrand GS be changed?

Under normal driving conditions, the transmission fluid of Emgrand GS should generally be changed every 120,000 kilometers, and every 60,000 kilometers under harsh driving conditions. It is recommended to use the original ATF (Automatic Transmission Fluid) and avoid mixing or misusing different types of transmission fluid. When changing the transmission fluid of Geely Emgrand GS, you can opt for brands like Red Line or Fuchs. Below are some precautions regarding transmission fluid: 1. The drain and fill ports should be in a relatively obvious position. 2. The drain port should be at the lowest point of the transmission. 3. The fill port must be higher than the drain port and located at the very top (since the transmission fluid will be filled to the brim, allowing excess fluid to flow out and control the fluid level).
15
2
Share

What causes the EPC light to come on in a JAC car and how to solve it?

JAC EPC light comes on and the car cannot move. The reasons and solutions are as follows: 1. Excessive carbon buildup in the throttle: Too much carbon buildup in the car's throttle affects the car's power. Solution: Clean it promptly to reduce fuel consumption. 2. Brake light switch failure: Poor contact or failure of the car's brake light switch causes the EPC light to come on. Solution: Repair it promptly to prevent safety hazards. 3. Intake system leakage: Leakage in the intake system affects the normal combustion of fuel in the engine. Solution: Contact a repair shop for immediate repair. 4. Engine overheating: Overheating of the engine affects its lifespan. Solution: Turn off the vehicle and lower the temperature to normal levels.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.