What is the mandatory scrapping period for sedans?

1 Answers
IsabelaDella
07/29/25 5:08pm
Sedans do not have a mandatory scrapping period, but rather a guided scrapping policy. For household 5-seat sedans and 7-seat SUVs, as well as non-commercial small and mini vehicles, there is no usage lifespan limit. When the normal driving mileage reaches 600,000 kilometers, the state will recommend scrapping. Guided scrapping is a recommendation, but if the vehicle still meets the requirements for continued use, it does not have to be scrapped. There are 4 criteria for mandatory scrapping: Reaching the specified usage lifespan; After repair and adjustment, the vehicle still fails to meet the national safety technical standards for in-use vehicles; After repair and adjustment or the adoption of control technology, the vehicle's emissions or noise still fail to meet the national standards for in-use vehicles; Failing to obtain the mandatory vehicle inspection certification for three consecutive inspection cycles after the expiration of the inspection validity period.
Was this review help?
20
4
Share
More Forum Discussions

Should You Patch or Replace a Punctured Tire?

Here is an introduction to the situations for patching and replacing tires: 1. Patching a tire: (1) When the puncture on the tread is only 6mm, you can choose to patch the tire. This is because a nail piercing the tire does not significantly damage the tire's structure—the steel wires, cord fabric, and polyester layers just have a hole that can be repaired. Of course, a safer approach is to replace it and use the damaged tire as a spare. (2) Minor tread cracks can also be repaired. Road conditions in many regions are complex, with uneven surfaces and debris, leading to frequent tread damage. Minor tread damage can be repaired to extend the tire's lifespan. If the tread pattern is peeling off, repair may not help, but if it's not severe, the tire can still be used. However, for high-speed driving or for owners who can afford it, replacement is recommended to ensure driving safety. 2. Replacing a tire: If the tread is deformed or the tire body is severely damaged, the tire must be replaced. Tread deformation is actually caused by damage to the tire body. When the tire body is subjected to significant force, its internal structure is compromised, leading to deformation, and the tread follows suit. At this point, the tire's lifespan has effectively ended.
19
4
Share

How to Smooth Out Wrinkled Leather Seats?

Methods to smooth out wrinkled leather seats: 1. Soap treatment: Soak a towel in hot water for a while, then evenly apply soap on the towel and repeatedly wipe the car's leather seats; 2. Hair dryer treatment: Use a hair dryer to blow back and forth over the wrinkled areas of the seat. Once softened, smooth it out by hand. Be careful not to hold the dryer too close to prevent surface damage from high heat. Leather seat maintenance tips: 1. Regularly clean and maintain them, applying wax once a month to keep the leather smoother; 2. Always dry them after cleaning to prevent moisture damage; 3. Avoid exposing leather seats to direct sunlight for prolonged periods, as this can cause the leather to peel.
3
2
Share

Can the Subject 3 Driving Test Appointment Be Canceled After Successful Booking?

After successfully booking the Subject 3 driving test, it can be canceled under the following two circumstances: 1. The first scenario is when the student completes the booking process on the website and successfully enters the booking queue, awaiting approval. In this case, the student can log in to the Traffic Safety Comprehensive Service Management Platform to cancel the test appointment. The steps are as follows: Log in to the Traffic Safety Comprehensive Service Management Platform, click on the [Business Handling] option in the upper right corner. Locate the [Driver's License Business] section, and the candidate can choose [Cancel Local Test Appointment] or [Cancel Non-local Test Appointment] based on their situation. Select the subject they wish to cancel and click [Cancel Appointment]. In the pop-up business notice window, click [Read and Agree]. Verify the information for accuracy, then click [Get Verification Code]. After entering the verification code received on the phone, click [Confirm Cancellation]. This completes the cancellation process. 2. The second scenario is when the student receives an SMS notification from the Vehicle Management Office confirming the successful test appointment. In this case, the student must personally visit the Vehicle Management Office with their ID card to cancel the appointment. This must be done at least one day before the test date; otherwise, the cancellation will not be processed, and it will be recorded as an absence. Each person has three opportunities to cancel an appointment for each subject. Once these opportunities are used up, it will not be possible to cancel a successfully booked test.
18
1
Share

What Causes the Timing Chain to Make Abnormal Noises?

The reasons for abnormal noises from the timing chain include: 1. The timing chain has been stretched; 2. Abnormal timing sprocket; 3. Severe wear of the chain guide; 4. Lack of tension in the chain tensioner. Compared to timing belts, timing chains have better durability, save space, and are maintenance-free for life, which leads many people to overlook their maintenance. Timing chains require regular oil changes, and low-quality oil should not be used. To prevent increased clearance due to wear, the system is equipped with a chain tensioner, which operates based on oil pressure. If there is an issue with the lubrication system, abnormal oil pressure can cause excessive chain clearance, leading to abnormal noises. When this problem occurs, it is necessary to inspect and repair it promptly to prevent tooth skipping and engine damage.
4
1
Share

What is the fuel consumption of the Cruze?

The manufacturer's stated fuel consumption for the Cruze under standard conditions is 5.2L/100km. Fuel consumption, commonly referred to as the amount of fuel a car uses over 100 kilometers, is influenced by several factors: 1. Environmental conditions. Official tests are conducted under controlled atmospheric temperatures, with laboratory temperatures set at 20±5℃, whereas actual environmental temperatures can vary between -30~40℃. Lower temperatures require the vehicle to spend more time warming up the engine, leading to higher fuel consumption. 2. Driving conditions. Official fuel consumption tests are conducted under typical driving conditions, consisting of two parts: urban driving at low speeds (maximum speed of 50km/h, average speed of 19km/h) and suburban driving at high speeds (maximum speed of 120km/h, average speed of about 63km/h). However, actual user driving locations and conditions vary widely, which is the main reason for significant differences in measured fuel consumption. Frequent urban driving results in higher fuel consumption, while normal highway driving leads to lower fuel consumption. Frequent short trips mean the vehicle operates at ideal temperatures for relatively less time, also increasing fuel consumption. 3. Air conditioning. Air conditioning has a noticeable impact on fuel consumption. Currently, official fuel consumption tests in China are conducted with the air conditioning turned off, whereas in actual driving conditions, using the air conditioning at maximum settings can increase fuel consumption by 5~25% compared to having it turned off. The United States has regulations for fuel consumption evaluation tests with the air conditioning turned on, which is worth considering.
9
4
Share

What is the maintenance interval for the Volkswagen Golf?

The maintenance interval for the Volkswagen Golf is not fixed. If high-quality fully synthetic oil is used, the car can be serviced every 8,000 to 10,000 kilometers. If mineral oil is used, the maintenance interval should be every 5,000 kilometers. Below is an introduction to engine oil: 1. Engine oil is referred to as the "blood" of the engine, as it serves functions such as lubrication, cleaning, sealing, heat dissipation, buffering, and rust prevention. Without engine oil, the engine cannot operate properly. 2. During routine maintenance, changing the engine oil is a primary task. Every time the oil is replaced, the oil filter should also be changed. If the oil is not replaced for an extended period, it will oxidize and degrade, reducing its lubricating properties and accelerating engine wear. 3. When purchasing engine oil, it is essential to choose the appropriate viscosity. The viscosity should neither be too high nor too low. If the viscosity is too high, it will increase the engine's operating resistance, while if it is too low, it will accelerate engine wear. 4. During normal engine operation, the oil forms a protective film on the surfaces of various engine components, reducing friction between them. If the oil is not changed for a long time, it will fail to form a stable protective film, leading to increased engine wear. 5. When purchasing an oil filter, always opt for products from reputable brands.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.