What is the maintenance schedule for the Roewe i5?

Should You Start the Engine Immediately Upon Entering the Car for Subject Three?

Starting the engine is required when entering the car for the Subject Three driving test. Here are the specific details for the Subject Three test: 1. Vehicle Inspection: Examinees must carefully check whether the vehicle is in idle state. If the tachometer shows around 800 RPM, the vehicle is idling normally. If it indicates 0, the engine is off and needs to be started. 2. Test Risks: Subject Three is an open-road test, which carries certain safety risks during the examination. A single wrong move by the examinee could lead to a serious traffic accident. 3. Test Interference: Subject Three must be conducted on actual roads with traffic flow, making it particularly susceptible to external disturbances. Examinees should pay attention to details during the test. 4. Scoring Criteria: The Subject Three test is evaluated through a combination of system and manual assessment. If the examinee's operation is inadequate, they will fail the test.

7

5

Share

How to Change the License Plate Number of a Motor Vehicle?

To change the license plate number of a motor vehicle, you need to apply to the local traffic management department for the cancellation of the vehicle's license plate. After that, you must publish a notice in the newspaper declaring the cancellation of the license plate. Once the waiting period is over, you can bring the required documents to apply for a new license plate. Below are the detailed steps for changing the license plate number of a motor vehicle: 1. Cancel the license plate: The vehicle's license plate can be canceled, but the vehicle for which the cancellation is being processed must have been registered under the owner's name for more than three years. 2. Submit the replacement application: Bring the original and photocopies of the vehicle registration certificate and ID card to the vehicle management office, fill out the application form for license plate replacement, submit the original license plate, and then pay the processing fee. 3. Pay relevant taxes and fees: You need to pay relevant taxes and fees equivalent to 2% of the vehicle's depreciated value.

9

2

Share

Why does the automatic transmission car jerk when shifting gears?

Automatic transmission cars may jerk when shifting gears mainly due to vibrations from gear engagement or thick transmission gear oil. The jerking can be divided into two scenarios: front body shaking and rear body shaking. Vibrations from gear engagement: If the front body shakes when shifting gears in an automatic transmission car, it is caused by vibrations from gear engagement, which is normal. In automatic transmissions, the onboard computer controls gear shifts. When the driver issues a shift command, the computer automatically shifts gears as long as the RPM is within a reasonable range, which can produce vibrations. In contrast, manual transmission drivers can control the clutch to reduce the sensation of vibration. Thick transmission gear oil: If the rear body shakes when shifting gears in an automatic transmission car, it is due to thick transmission gear oil with high density. The drivetrain receives engine power more noticeably, causing the rear body to shake visibly. When the car is in motion, the transmission gear oil temperature rises, thinning the oil and eliminating the shaking.

11

4

Share

What should the engine RPM be at 80 mph?

The engine RPM should be maintained between 2000-2500 when driving at 80 mph. For a 1.4T displacement engine, an engine speed of around 2000 rpm is normal, while the idle speed typically ranges between 700 rpm and 1000 rpm. The effective power output of the engine varies with different RPM levels, meaning the engine's effective power is closely related to its rotational speed. The maximum power calibrated before the engine leaves the factory is not the absolute maximum power the engine can produce, as the maximum effective power of an engine has its limits. Even for the same engine model, the power output may differ based on the vehicle's intended use. When starting the car in first gear, the engine RPM generally stays around 1000-1500 rpm. In second gear, it maintains around 1500-2000 rpm. Similarly, in third and fourth gears, the RPM remains between 1500-2000 rpm. When driving at high speeds in fifth gear, the engine RPM typically ranges from 1500-3000 rpm.

15

2

Share

Is it permissible not to affix the Chongqing Traffic Information Card electronic tag?

It is not permissible to omit affixing the Chongqing Traffic Information Card electronic tag; it must be affixed to the windshield. Below is relevant information regarding the Chongqing Traffic Information Card: 1. Introduction: Motor vehicles that have obtained a locally issued vehicle license should collect the motor vehicle traffic information card from the vehicle management office of the public security traffic management department and affix it to the upper middle part of the front windshield where it does not obstruct the driver's view. For vehicles without a windshield, it should be affixed to an appropriate location at the front of the vehicle. Drivers who have obtained a locally issued motor vehicle driving license should collect the driver traffic information card from the vehicle management office of the public security traffic management department and carry it with them while driving. 2. Notes: The Chongqing Traffic Information Card must not be lent or used by others. If the traffic information card has not been collected or is lost or damaged, it should be re-collected from the vehicle management office of the public security traffic management department by presenting the motor vehicle driving license or vehicle license.

8

4

Share

What Causes the Steering Wheel of Volvo S60 to Make Abnormal Noises When Turning?

Volvo Asia Pacific S60 steering wheel abnormal noise when turning reasons are as follows: 1. Friction between plastic components inside the steering wheel: Especially in winter, since most parts inside the steering wheel are made of plastic, the plastic hardens as the temperature drops, making it prone to abnormal noises and static electricity during friction. 2. Damage or excessive clearance of the steering tie rod ball joint: This situation usually causes steering wheel vibration and abnormal noise when turning. It is recommended to replace the tie rod ball joint or the entire tie rod assembly, followed by a four-wheel alignment to adjust the parameters. 3. Internal damage to the power steering gear: If you noticeably feel that the steering effort is heavier or less smooth than before when turning, accompanied by abnormal noise, it may be due to internal damage to the power steering gear, often caused by excessive wear and clearance of the meshing gears inside the steering gear. This condition cannot be repaired; it is recommended to replace the entire steering gear assembly.

6

3

Share

What is the maintenance schedule for the Roewe i5?

Should You Start the Engine Immediately Upon Entering the Car for Subject Three?

How to Change the License Plate Number of a Motor Vehicle?

Why does the automatic transmission car jerk when shifting gears?

What should the engine RPM be at 80 mph?

Is it permissible not to affix the Chongqing Traffic Information Card electronic tag?

What Causes the Steering Wheel of Volvo S60 to Make Abnormal Noises When Turning?

What are the symptoms of a faulty thermostat in the Buick Excelle?

What is the method for resetting the tire pressure on the Golf 7?

Will not having a vehicle inspected affect the owner?

What is the Tank 300?