What is the maintenance schedule and items for Audi Q5L?

1 Answers
MicahDella
07/24/25 5:43pm
Audi maintenance is generally performed once a year or every 10,000 kilometers. Automobile maintenance: Automobile maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the automobile, also known as automobile servicing. Audi Q5L maintenance items: Replace engine oil and oil filter, visually inspect the engine for leaks or damage, visually inspect all components related to exhaust emissions, check the exhaust system for leaks or damage, check the concentration of coolant/antifreeze, add coolant or adjust concentration if necessary, query the self-diagnosis system fault memory, check the thickness of brake friction linings, visually inspect the brake system for leaks or damage, check brake fluid level based on the wear status of brake friction linings, visually inspect the transmission, final drive, and constant velocity joint boots for leaks or damage, check the steering ball joint dust boots for leaks or damage, check the tread depth and wear pattern of all tires, check tire pressure and adjust if necessary, check the battery electrolyte level and add distilled water if necessary, check the steering tie rod end play, tightness, and dust boot condition, check the air reservoir and water drain valve for cleanliness and clean if necessary, check and lubricate the function of door locks, safety locks, and child safety locks, check the function of lighting, turn signals, hazard warning lights, warning/indicator lights, and horn, check the function of windshield wipers/washers, headlight washers, washer nozzles, and the stopping position of the wipers.
Was this review help?
7
0
Share
More Forum Discussions

What are the differences between Geely Vision and Geely Emgrand?

The differences between Geely Vision and Geely Emgrand are: 1. Different body dimensions: The length, width, and height of Vision are 4599mm, 1747mm, and 1482mm respectively; while those of Emgrand are 4632mm, 1789mm, and 1470mm. 2. Different wheelbases: The wheelbase of Vision is 2615mm, whereas Emgrand's is 2650mm. 3. Different transmissions: Vision is equipped with a 5-speed manual, 4-speed automatic manual, or CVT transmission, with a maximum torque of 142Nm; Emgrand comes with a 5-speed manual or CVT transmission, delivering a maximum torque of 140Nm.
12
0
Share

What is the method to reset the service light on the Everest?

The method to reset the service light on the Everest is: 1. Turn on the ignition switch; 2. With the engine off, press and hold the short-distance counter reset button below the tachometer; 3. Turn the ignition switch to the 'on' position, release the short-distance counter reset button, and the 'service' indicator will appear on the display; 4. Press the minute button on the clock, turn the minute button to the right, and the mileage will appear on the display; 5. Turn off the engine, and a reset reminder message will appear, then proceed with the reset. Taking the 2020 Everest as an example, it is a mid-size SUV with body dimensions of: length 4892mm, width 1862mm, height 1837mm, and a wheelbase of 2850mm.
10
3
Share

Is Vehicle File Transfer the Same as Ownership Transfer?

Vehicle file transfer and ownership transfer are not the same thing. The specific differences are as follows: 1. Vehicle file transfer: Refers to the process of extracting the vehicle's registration file from its original registration location and re-registering it in another region, which requires changing the license plate. 2. Vehicle ownership transfer: Refers to the process of transferring the vehicle's ownership to another person at its original registration location. Below are the required documents for ownership transfer and file transfer: 1. Personal ownership transfer: Original ID card of the seller, vehicle registration certificate, driving license, buyer's ID card, and the presence of both parties and the vehicle. 2. Outbound file transfer procedures: Original ID card of the seller, vehicle registration certificate, driving license, original ID card of the buyer from the transfer-in location, and the presence of both parties and the vehicle.
19
2
Share

What is the reason for the Mercedes-Benz C200L electronic water pump not working?

Mercedes-Benz C200L electronic water pump not working is caused by the cooling tank being too tightly sealed, and it can be resolved by bleeding the system. Method for bleeding the Mercedes electronic water pump: First, open the radiator cap of the electronic water pump, then turn on the car's ignition switch, set the air conditioning to heating mode at the highest temperature, and adjust the fan to the lowest setting. At this point, the water pump will start working. After letting the pump run for a while, the air will be expelled. Precautions for bleeding the Mercedes electronic water pump: It is important to note that bleeding must be performed when the engine is cold. Never open the radiator cap or drain valve when the coolant is at a high temperature to avoid burns.
4
4
Share

Which One is the Fog Light on the Buick Excelle?

The fog light on the Buick Excelle is the light located below the rear lamp. The functions of the fog light are: 1. The front fog light is used to improve illumination when the road ahead is unclear and can alert oncoming drivers; 2. The rear fog light helps vehicles behind to spot the car in low visibility conditions. Taking the 2021 Buick Excelle as an example, it is a compact car with body dimensions of: length 4609mm, width 1798mm, height 1486mm. The 2021 Buick Excelle features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.3T turbocharged engine, delivering a maximum horsepower of 163PS, a maximum torque of 230Nm, and a maximum power of 120kW, paired with a 6-speed automatic transmission.
2
0
Share

What is the method for replacing the air filter element on a Peugeot 307?

The method for replacing the air filter element on a Peugeot 307 is as follows: 1. Open the car's engine hood, loosen the screw of the brake fluid reservoir, and then remove the intake pipe head; 2. After removing the surface cover, you can see the air filter box, then unscrew the screws of the air filter box; 3. Loosen the fixing screws at the connection between the air filter box and the throttle interface; 4. Remove the connecting hose, then push the air filter box to the right while lifting it, and the air filter box can be taken out; 5. After removing the air filter box, unscrew the screws of the air filter element, and then you can replace it with a new one. The function of the air filter element is to filter out dust and sand particles in the air, ensuring that sufficient and clean air enters the cylinder.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.