What is the maintenance interval for the Vision?

Where is the urea filter element located for replacement?

The urea filter element is replaced inside the urea tank. Below is an introduction to the urea filter element: 1. Replacement frequency: The car urea filter element is estimated based on mileage, generally requiring replacement every 50,000 to 60,000 kilometers. It is necessary to replace the urea filter element regularly. The dirt-holding capacity of the urea filter element is limited, so even when using genuine urea solution, regular replacement is required. Once the filter element loses its filtering effect, impurities in the urea can cause system failures. 2. Recommendation: It is recommended to use genuine urea solution and replace the urea filter element regularly to ensure the proper functioning of the aftertreatment system, prevent engine torque limitation, and maintain normal vehicle operation.

18

3

Share

How much fuel is needed to run a car's air conditioning overnight?

It depends on the car model and engine displacement. Generally, it consumes around 10 liters of fuel. Be cautious not to run the air conditioning overnight in an enclosed space, as it can easily lead to oxygen deprivation. Here are some fuel-saving tips for using air conditioning: Wait for the car to cool down before turning on the air conditioning: During summer when the car is parked outdoors, it's best to open the windows first before getting in. Avoid immediately turning on the air conditioning for cooling. Instead, set the fan to maximum speed to accelerate ventilation and wait for the hot air inside to dissipate before activating the cooling function. Avoid setting the temperature too low: Do not keep the air conditioning temperature at the lowest setting for extended periods. A significant difference between the interior and exterior temperatures will increase fuel consumption and may also affect the health of the driver and passengers.

15

4

Share

Why Is There Engine Oil Inside the Turbocharger?

Turbochargers must have engine oil to lubricate the rotor. The rotor operates at high temperatures and extremely fast speeds; without oil, it would seize and stop rotating. The following explains why turbochargers draw engine oil from the engine: Insufficient Lubrication: During normal diesel engine operation, the turbocharger operates at extremely high speeds and temperatures. If the engine is shut off directly, the oil pump will stop working immediately, while the turbocharger undergoes a gradual slowdown. This results in semi-dry friction between the center housing and rotor shaft, which can easily lead to early signs of wear in the turbocharger. This, in turn, damages the rotor shaft and oil seals, causing the turbocharger to leak oil. Dirty Engine Oil: If the oil contains excessive impurities, the hard particles can scratch the housing and sealing rings, leading to premature damage of the turbocharger.

18

2

Share

What is the engine oil specification for the Volkswagen Magotan?

Volkswagen Magotan is best suited for 5W30 engine oil. For maintenance purposes, you may choose international brands such as Shell, Mobil, or Castrol, or domestic brands like Tongyi, Kunlun, and Great Wall. The official manual recommends using SM-grade or higher 5W-30 synthetic oil. Engine oil viscosity changes with temperature, so it's crucial to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity—5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the vehicle. The latter number represents the oil's kinematic viscosity at 100°C. A higher value means the oil maintains its viscosity better under high temperatures, which can be interpreted as better lubrication performance under such conditions. The steps for changing the engine oil in a Volkswagen Magotan are as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan. Loosen the oil drain plug with a wrench and collect the old oil in a container until no more oil flows out. Start the engine for about 30 seconds to allow the remaining oil in the main oil passage to drain. Remove the oil filter using a specialized wrench. Apply a thin layer of oil to the seal of the new oil filter and tighten it clockwise by hand. Add new engine oil through the filler cap on the engine valve cover, typically filling up to three-quarters of the oil container. Start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter. If any leaks are found, perform necessary repairs. After stopping the engine, pull out the dipstick to ensure the oil level is within the standard range.

11

4

Share

How Many Cylinders Does the Geely Vision Have?

Geely Vision is equipped with a 4-cylinder engine. Common cylinder configurations for automotive engines include 3, 4, 5, 6, 8, 10, and 12 cylinders. Engines with displacements below 1 liter typically use 3 cylinders, those between 1-2.5 liters generally employ 4 cylinders, around 3 liters usually feature 6 cylinders, approximately 4 liters utilize 8 cylinders, and engines above 5.5 liters adopt 12 cylinders. Here are some related details: 1. Common Cylinder Configurations: Automotive engines commonly come with 3, 4, 5, 6, 8, 10, or 12 cylinders, with 4 and 6 cylinders being the most prevalent. The 4-cylinder configuration is the most widely used. Nowadays, engines with displacements below 1.3 liters are increasingly adopting 3 cylinders. Engines ranging from 1.5 to 2.5 liters typically have 4 cylinders, those around 3 liters usually feature 6 cylinders, approximately 4 liters use 8 cylinders, and engines above 5.5 liters employ 12 cylinders. Generally, with the same cylinder volume, more cylinders result in larger displacement and higher power output. For the same displacement, more cylinders mean smaller cylinder bores, allowing higher rotational speeds and thus greater power enhancement. 2. Engine Exhaust Manifold: Engines are generally equipped with exhaust manifolds. Opening the engine hood reveals individual exhaust manifold pipes. The number of exhaust manifold pipes corresponds to the number of cylinders in the engine, so the cylinder count can be determined by counting the exhaust manifold pipes.

15

2

Share

Where is the Air Conditioning Filter in a Pickup Truck?

The air conditioning filter in a pickup truck is generally located under the glove box on the passenger side. Below is some knowledge about the air conditioning filter: 1. Function: It can adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other substances in the air; it has strong and long-lasting moisture absorption. This prevents the car windows from fogging up, ensuring clear visibility for the driver and passengers and safe driving. It also provides fresh air to the cabin, preventing the occupants from inhaling harmful gases and ensuring driving safety. Additionally, it effectively sterilizes and deodorizes. 2. Replacement: How often the car's air conditioning filter needs to be replaced actually depends on your usage. For general urban household cars, it is recommended to replace it every six months or once a year.

18

4

Share

What is the maintenance interval for the Vision?

Where is the urea filter element located for replacement?

How much fuel is needed to run a car's air conditioning overnight?

Why Is There Engine Oil Inside the Turbocharger?

What is the engine oil specification for the Volkswagen Magotan?

How Many Cylinders Does the Geely Vision Have?

Where is the Air Conditioning Filter in a Pickup Truck?

Are There Turbocharged Motorcycles?

What is the maximum torque that the Volkswagen DQ200 can withstand?

What does odo mean on a motorcycle dashboard?

Is It Normal for Motorcycle Exhaust to Smell Like Gasoline?