What is the maintenance interval for the Qin Plus-DMI?

2 Answers
DelAva
07/25/25 5:31am
The maintenance interval for the Qin Plus-DMI is as follows: 1. Filters: The oil filter must be replaced during every routine maintenance. For vehicles driven in areas with low dust levels, the air filter can generally last for 20,000 kilometers, requiring only cleaning at 7,500 kilometers. The lifespan of the fuel filter depends on the quality of fuel used. If you consistently refuel at reputable gas stations and experience no fuel supply issues, replacement can be considered after 20,000 kilometers. 2. Brake pads: Under normal usage, brake pads can last 30,000-40,000 kilometers, and the original battery can last 3-4 years. 3. Spark plugs: There are various types of spark plugs. Standard nickel-alloy spark plugs can last 20,000-30,000 kilometers, platinum spark plugs can last 80,000-100,000 kilometers, and iridium spark plugs can last 30,000-40,000 kilometers. The service life of these components and fluids can be adjusted based on the vehicle's maintenance manual and actual driving conditions.
Was this review help?
3
3
Share
DelDonovan
08/10/25 5:46pm
I've been driving the Qin Plus DM-i for a while now, and the maintenance schedule is quite straightforward: the first service should be done within 5,000 kilometers or six months. I went to the 4S dealership right on time for my first service, where they changed the engine oil and checked the battery and drivetrain—the whole process took less than an hour. After that, maintenance is required every 10,000 kilometers or once a year. Hybrid cars are much more hassle-free because the electric components don’t need frequent servicing, but the engine part is similar to traditional cars—regular maintenance helps prevent carbon buildup and extends its lifespan. I recommend setting a mileage reminder on the dashboard so you don’t miss the service intervals. The maintenance cost isn’t expensive either, just a few hundred yuan per visit, but it’s crucial for keeping the warranty valid, which can save you big money in case of issues. When driving normally, I also check the tire pressure weekly—this small habit helps prevent unexpected incidents, after all, safety comes first!
Was this review help?
8
0
Share
Expand All
More Forum Discussions

What Does Car Glazing Mean?

Car glazing involves using a soft wool or sponge with a high-speed vibrating and friction machine to forcefully penetrate glaze molecules into the surface of the car and the gaps in the paint, leveraging the glaze's unique permeability and adhesiveness. After glazing, the car's paint surface can achieve or even surpass the original paint effect, making older cars look newer and new cars appear brighter. It also provides features such as high-temperature resistance, sealing, oxidation resistance, enhanced gloss, washability, and corrosion resistance, laying a foundation for future car detailing, painting, and refurbishment. The glazing process includes: 1. Neutral cleaning; 2. Clay polishing; 3. Deep cleaning; 4. Vibrating and glazing; 5. Dust-free polishing.
18
0
Share

Where to Check the Tire Manufacturing Date?

Tire manufacturing date is displayed on the sidewall of the tire, allowing car owners to easily check it themselves. For all tires produced after the year 2000, the last four digits of the Tire Identification Number (TIN) represent the tire's manufacturing date. Among these four digits, the last two indicate the year of production, while the first two represent the week of production. Tires are wear-prone components that require regular replacement. Additionally, tires have a warranty period; once this period is exceeded, even if the tire shows minimal wear, it should not be used further to avoid safety hazards. Such tires are generally considered overstock or inventory tires.
8
2
Share

What does it mean when the i-stop yellow light is on?

i-stop yellow light indicates that the auto start-stop system is turned off. The solutions are: 1. Press the ignition switch twice without stepping on the brake; 2. Press the i-stop switch for 10 seconds; 3. Start the car and turn the steering wheel from the far left to the far right; 4. Turn off the engine and let it sit for more than 10 minutes. The working principle of the auto start-stop system is: When the car stops due to traffic congestion or at an intersection, and the driver steps on the brake pedal to stop and shift gears, the Start or Stop system automatically detects that the engine is idling and no gear is engaged, the wheel speed sensor of the anti-lock system shows zero, and the electronic electromagnetic sensor shows there is enough energy for the next start.
8
2
Share

What is the correct shutdown procedure for one-button start?

The correct shutdown procedure for one-button start is as follows: Press and hold the brake pedal to bring the vehicle to a smooth stop; then shift the gear from D to N and engage the parking brake; release the foot brake but do not turn off the power, then continue pressing the foot brake, shift the gear from N to P, release the foot brake, press the one-button start button, the power turns off, and the shutdown is complete. The one-button start device is part of a smart car, a button device that simplifies the startup process, and can also be used to shut down the engine. This device can be retrofitted in place of the original car key lock or installed as an independent panel. The function of one-button start differs from traditional mechanical key ignition and conventional startup procedures. Simply press the one-button start button to start or shut down the engine, eliminating the hassle of losing or searching for keys. During the ignition process, it is mostly necessary to press the foot brake.
14
2
Share

What Are the Benefits of Cleaning the Throttle Body?

The benefits of cleaning the throttle body include: 1. Protecting the normal operation of the throttle body; 2. Effectively cleaning and unclogging the gum and carbon deposits in the fuel injectors, maintaining the cleanliness of the fuel system; 3. Reducing exhaust emissions, saving fuel, and protecting the oxygen sensor and catalytic converter; 4. Preventing issues such as knocking, unstable idle, and poor acceleration caused by gum and carbon deposits; 5. Lubricating the valves and valve guides; 6. Lubricating the upper cylinder area, reducing piston ring wear, and extending service life. The throttle body is a controllable valve that regulates the air entering the engine, and there are two types: traditional cable-operated and electronic throttle bodies.
6
1
Share

What Are the Taboos When Picking Up a New Car?

Taboos when picking up a new car include: 1. Avoid emergency braking, as insufficient tire grip may lead to loss of vehicle control; 2. Avoid overloading, keeping the load within 70% to 80% of the rated capacity; 3. Avoid long-distance trips, which can cause excessive wear and tear on components and affect lifespan; 4. Avoid high speeds, maintaining engine speed between 2,000 to 4,000 RPM; 5. Avoid changing oil too early, as new car oil has lower viscosity and better heat dissipation. After purchasing a new car, pay attention to: 1. Warming up the engine before starting to allow sufficient lubrication time; 2. Regularly checking fluids and tire pressure to identify safety issues; 3. Driving at a steady speed and frequently shifting gears to facilitate engine and transmission break-in; 4. Understanding the vehicle's blind spots; 5. Adjusting the steering wheel, seat, and rearview mirror positions properly.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.