···
Log in / Register

What is the maintenance interval for the Highlander?

3 Answers
RachelLee
07/29/25 3:36pm
The maintenance interval for the Highlander is every 10,000 kilometers or 6 months. Below is more relevant information: 1. Highlander parts replacement cycle: Engine oil and oil filter should be replaced every 10,000 kilometers or 6 months, the air conditioning filter every 20,000 kilometers or 1 year, the air filter, brake fluid, as well as the transfer case oil and rear differential oil for four-wheel-drive models every 40,000 kilometers or 2 years, and the spark plugs every 60,000 kilometers. 2. Highlander introduction: The Highlander is a vehicle produced by Toyota, a large-sized SUV in the Toyota family. It features a spacious body and an innovative, roomy interior. Moreover, the Highlander comes standard with the highest level of safety equipment in its class. This SUV is exceptionally quiet while driving and offers outstanding responsiveness, combining versatility with driving comfort.
Was this review help?
2
2
Share
StLillian
08/14/25 9:21am
From my experience driving a Toyota Highlander, the maintenance cycle is generally recommended in the manual for basic maintenance every 5,000 miles or 6 months, such as changing the oil and inspecting the brake system. However, this also depends on your driving habits—if you frequently encounter city traffic congestion or rough roads, putting more strain on the engine, you might need to shorten the interval to around 4,000 miles. If you do more long-distance highway driving, you can stretch the interval a bit. For my own car, I stick to maintenance every six months, checking tire wear and filters to prevent small issues from turning into major repairs. Remember, don’t wait for the warning light to come on before servicing. The maintenance cycle isn’t set in stone; you need to adjust it based on the car’s condition and weather changes. This way, you can extend the car’s lifespan easily by ten years.
Was this review help?
2
0
Share
Expand All
OGemma
10/12/25 2:49am
As a long-time Highlander owner who has owned three vehicles, I follow the manual's recommendation of 7,500 miles or 6 months for maintenance, but I'm more flexible in practice since I enjoy road trips with my family. For instance, after long-distance journeys, I always perform extra checks on the coolant and drivetrain – highway driving does increase wear. From my experience, maintenance intervals shouldn't be too rigid. My current five-year-old vehicle shows reduced engine noise and better fuel efficiency thanks to regular care. I'd advise new owners to maintain service records; tracking changes helps. Treat your car like an old friend – proper care ensures longer, reliable service.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

Where is the fuel consumption displayed on the T-Roc?

The fuel consumption of the T-Roc is displayed on the trip computer screen of the instrument panel. It can be switched by using the display toggle button. The T-Roc is a compact SUV under the Volkswagen brand, with body dimensions of 4318 mm in length, 1819 mm in width, and 1582 mm in height, and a wheelbase of 2688 mm. The T-Roc is equipped with three engines: a 1.2-liter turbocharged engine, a low-power version 1.4-liter turbocharged engine, and a high-power version 1.4-liter turbocharged engine. The 1.2-liter turbocharged engine is paired with a 5-speed manual transmission, while the two 1.4-liter turbocharged engines are matched with a 7-speed dual-clutch transmission. The dual-clutch transmission offers fast gear shifting and high transmission efficiency, making it highly suitable for use with small-displacement turbocharged engines.
9
2
Share

Is It Normal for a Mercedes-Benz to Have Steering Gear Noise When the Engine Is Hot?

It is not normal for a Mercedes-Benz to have steering gear noise when the engine is hot, and it requires timely inspection and repair; otherwise, it may affect the normal operation of the vehicle. The steering gear is also known as the vehicle steering mechanism. Rack and Pinion Steering Gear: This is one of the most common types of steering gears. Its basic structure consists of a pair of meshing pinion and rack. When the steering shaft drives the pinion to rotate, the rack moves linearly. Sometimes, the rack directly drives the tie rod, enabling the steering wheels to turn. Therefore, this is the simplest type of steering gear. Its advantages include simple structure, low cost, sensitive steering, compact size, and the ability to directly drive the tie rod. It is widely used in automobiles. Worm and Sector Steering Gear: This type of steering gear uses a worm as the driving component and a sector (or peg) as the driven component. The worm has trapezoidal threads, and a finger-like tapered peg is supported by bearings on the sector, which is integrated with the pitman arm shaft. During steering, the rotation of the steering wheel turns the worm, causing the tapered peg embedded in the worm's spiral groove to rotate on its own while moving in an arc around the pitman arm shaft. This drives the sector and pitman arm to swing, thereby turning the steering wheels through the steering linkage. This type of steering gear is typically used in heavy-duty trucks that require greater steering force.
13
5
Share

How to Set Up One-Touch Window Lift for BMW 5 Series Remote Control?

BMW 5 Series one-touch window lift setup method: Press and hold the window button to raise the window to the top, keep holding for 3 to 5 seconds before releasing. Then press the window button to lower the window to the bottom, hold for 3 to 5 seconds before releasing, and the one-touch window lift setup is complete. One-touch window lift refers to a system where the car window glass can be controlled to ascend or descend to position with a single button press, mainly designed for the convenience of drivers and passengers, avoiding distractions caused by manually operating windows and enhancing safety. The BMW 5 Series has a body length, width, and height of 4998mm, 1901mm, and 1559mm respectively, with a wheelbase of 3108mm. In terms of configuration, this vehicle is equipped with rear-seat entertainment audiovisual devices, including two 8-inch color displays mounted on the back of the front seats, along with a rear central console, an integrated DVD player, a DVD storage box, and a remote control.
4
0
Share

What does the Shaanxi S license plate represent?

Currently, there is no Shaanxi S license plate. Shaan represents Shaanxi Province. The license plate codes for various regions in Shaanxi Province are as follows: Shaan A for Xi'an, Shaan B for Tongchuan, Shaan C for Baoji, Shaan D for Xianyang, Shaan E for Weinan, Shaan F for Hanzhong, Shaan G for Ankang, Shaan H for Shangluo, Shaan J for Yan'an, Shaan K for Yulin, and Shaan V for Yangling District. A license plate number is an identifier for a vehicle, equivalent to the vehicle's ID card. The English letters on the license plate represent the prefecture-level city code where the vehicle is registered, typically assigned by the provincial vehicle management office based on the status of each prefecture-level city. Shaanxi, abbreviated as Shaan or Qin, is a provincial-level administrative region of the People's Republic of China, with Xi'an as its capital. It is located in the inland hinterland of China, in the middle reaches of the Yellow River, bordering Shanxi and Henan to the east, Ningxia and Gansu to the west, Sichuan, Chongqing, and Hubei to the south, and Inner Mongolia to the north.
19
2
Share

Is the first maintenance for Audi A4 free?

Generally speaking, the first maintenance for a car is free. When purchasing a car, you will receive a car warranty manual. Bring this manual to the brand's 4S store to proceed with the first maintenance. The first maintenance is crucial and should be done on time. During this maintenance, the vehicle can be inspected to confirm its usage condition. Notes for the first car maintenance: Follow the scheduled maintenance time. Every car comes with a maintenance manual upon leaving the factory, which indicates the maintenance intervals. Car owners can refer to the information in the manual for the first maintenance. When purchasing a car, sales personnel usually remind consumers to perform the first maintenance at a certain time or after reaching a certain mileage. Items included in the first maintenance. The first maintenance typically includes free oil and oil filter replacement, along with a comprehensive vehicle inspection, usually taking about half an hour. The first maintenance can be done at a 4S store or a nearby location, but only cars serviced at a 4S store for their first maintenance can enjoy the car's quality guarantee. Pre-check any issues before the first maintenance. During the break-in period, car owners can evaluate the vehicle's condition. If there are any concerns, they can promptly report them to the technicians during the first maintenance.
15
2
Share

What is the body length of the Toyota Reiz?

Toyota Reiz has a body length of 4750mm, height of 1795mm, width of 1450mm, and wheelbase of 2850mm. In terms of appearance, this car features a U-shaped front grille paired with peanut-shaped headlights, presenting a balanced design. From the side view, the streamlined body lines create excellent visual effects from head to tail, showcasing a dynamic yet restrained style. The color options include black, dark blue, and silver gray. Regarding powertrain, this rear-wheel-drive vehicle offers 3.0L and 2.5L engine displacements, paired with a 6-speed automatic manual transmission. The power and torque outputs are sufficient: the former delivers maximum output power of 170 kW and maximum torque of 300 N·m, while the latter provides maximum output power of 145 kW and maximum torque of 242 N·m.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.