What is the maintenance cycle of the Emgrand GS?

1 Answers
MacPaislee
07/30/25 10:02am
The maintenance cycle for the Emgrand GS is every 5,000 kilometers or three months. After driving 5,000 kilometers, the engine oil and oil filter need to be replaced. It's important to note that the engine oil and oil filter should be replaced simultaneously. The air filter and cabin air filter should be replaced every 15,000 kilometers. The dimensions of the Emgrand GS are 4,440mm in length, 1,833mm in width, and 1,573mm in height, with a wheelbase of 2,700mm. This car offers two body styles, with the sport version adding more integrated sporty front and rear bumpers, inverted trapezoidal chrome exhaust pipe decorations, light-guided LED daytime running lights, a panoramic sunroof, red brake calipers, and other configurations.
Was this review help?
5
0
Share
More Forum Discussions

What Causes Diesel Fuel to Turn Black?

Diesel fuel turns black due to prolonged storage. Here are some precautions for diesel storage and usage: 1. Prohibited uses: It is strictly forbidden to mix diesel with gasoline for lighting or as fuel for kerosene stoves. 2. Before use: Diesel must undergo sedimentation, filtration, and removal of impurities and moisture before use to ensure the proper functioning of the diesel engine fuel supply system. In winter, it may be necessary to preheat the diesel before use. 3. Mixing: Different grades of diesel within the same classification have basically the same quality indicators except for the freezing point and cold filter plugging point. Therefore, when resources are insufficient, they can be mixed under appropriate temperature conditions.
17
0
Share

Is it advisable to purchase used auto parts tires?

It is possible to buy used auto parts tires, but there are risks involved. Below is a detailed introduction to used auto parts tires: 1. Risks: The main risks of purchasing used auto parts tires lie in the inability to accurately assess their quality, manufacturing date, mileage, service life, remaining usable lifespan, remaining usable mileage, as well as stability and safety during use. 2. Identification: Tire tread patterns are divided into longitudinal and transverse patterns. The quality of used auto parts tires should be judged based on factors such as the depth of the tire tread. Additionally, whether the wear is even can also indicate whether the used auto parts tires can be used normally in the future.
9
0
Share

Can the Air Conditioning Be Turned On Without Starting the Car?

You can turn on the air conditioning without starting the car, but the air blown out by the blower is just natural air. The natural air blown by the blower is powered by the battery. If the blower consumes too much power from the battery, it may cause the battery to be undercharged for a long time. The air conditioning compressor is driven by the engine's power, so the compressor naturally does not work when the car is turned off. Correct usage of car air conditioning: 1. Open the windows before turning on the air conditioning: After the car has been exposed to the sun in summer, do not rush to turn on the air conditioning upon entering the car. First, lower all the windows or open the doors, then turn on the fan to accelerate air circulation, and finally close the windows and turn on the air conditioning. This helps release toxic substances and provides better cooling effects. 2. Direct the air conditioning upward at an angle: Choose to blow the air upward at an angle, utilizing the principle that hot air rises and cold air sinks, to cool the car from top to bottom. 3. Avoid prolonged low temperatures: While driving, car owners should avoid setting the air conditioning temperature too low, as this will increase fuel consumption. Try to keep the temperature difference between the inside and outside of the car minimal.
4
3
Share

Why is overtaking not recommended on downhill slopes?

When driving motor vehicles on downhill sections of mountain roads, overtaking should be avoided as much as possible. This is because vehicles tend to gain excessive speed due to gravitational force on downhill slopes, making them more difficult to control compared to level roads. With gravitational acceleration and reduced resistance on downhill sections, the question inquires about the reasons to avoid overtaking - note that the preceding vehicle's speed is not the primary reason against overtaking. Additional guidelines: Precaution 1: Avoid overtaking as much as possible on mountain roads. When overtaking is necessary, choose wide road sections with gentle uphill gradients, activate the left turn signal, honk in advance, and only proceed after confirming the preceding vehicle yields. Never force overtaking, and strictly prohibit overtaking on narrow roads, sharp curves, continuous turns, or sections with oncoming traffic. Precaution 2: Motor vehicle overtaking must comply with these regulations: No overtaking is allowed at intersections, crosswalks, flooded roads, or submerged bridges. When overtaking on mountain road sections, drivers must: Activate the left turn signal in advance; Sound the horn beforehand; Confirm the preceding vehicle yields before passing.
9
3
Share

Can the car still be driven when the differential lock light is on?

When the differential lock indicator light is on, the car should not continue to be driven. The following are the specific functions of the differential lock: 1. Improve passing ability: The differential lock is designed to enhance the car's ability to pass through bad road conditions. When one of the car's drive axles spins freely, it can quickly lock the differential, turning the two drive axles into a rigid connection. 2. Transmit torque: It transfers most or even all of the torque to the non-slipping drive axle, making full use of the adhesion to generate sufficient traction, allowing the car to continue moving. 3. Differential function: It prevents the vehicle from having one wheel spinning freely or being suspended while the other wheel spins, which would make the car unable to drive normally or get out of trouble.
2
1
Share

Why are fog lights white now?

This situation is indeed the case, especially when the surface of the car's fog lights appears white, but the actual bulb inside is orange, so it still emits yellow light when lit. More relevant information is as follows: 1. The function of fog lights is: to improve illumination in unclear road conditions ahead, providing a high-intensity scattered light source that penetrates dense fog, serving to alert oncoming drivers; in environments with low visibility such as fog, snow, or rain, to make the vehicle visible to other road participants behind. 2. Precautions for using car fog lights are: when visibility is below 100 meters, fog lights must be turned on and speed should be reduced; when visibility is below 30 meters, fog lights should be turned on, the vehicle should be pulled over, and hazard warning lights should be activated; in weather conditions with rain, fog, snow, or dust, fog lights should be turned on and speed should be reduced, but double flashing lights should not be used.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.